| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| administrativeState |
Specifies the administrative state of this multi-chassis peer end-point. It is
"up" by default.
INTEGER < noop ( 1 ) , inService ( 2 ) , outOfService ( 3 ) >
type=netw.AdministrativeState default=tmnxOutOfService Displayed(tab/group)=Administrative State |
| bfdEnabled |
Specifies whether BFD is enabled on the node.
type=boolean default=false Displayed(tab/group)=BFD Enabled |
| bootTimer |
Specifies the time the MC-EP protocol keeps trying to establish a connection before assuming a
failure of the remote peer.
type=int default=300 minimum=1 maximum=600 Displayed(tab/group)=Boot Timer |
| holdOnNeighborFailure |
Specifies the number of keep-alive intervals that the local node will wait for packets from the
MC-EP peer before assuming failure.
type=int default=3 minimum=2 maximum=25 Displayed(tab/group)=Hold On Neighbor Failure |
| keepAliveInterval |
Specifies the interval at which keep-alive messages are exchanged between two systems
participating in MC-EP. The interval is set in deci-seconds.
type=int default=10 minimum=5 maximum=500 units=deciseconds Displayed(tab/group)=Keep-Alive Interval |
| lastOperationalStateChange |
Indicates the sysUpTime at the time of the last operational state change for this MC-EndPoint.
type=Date access=read-only default=0 Displayed(tab/group)=Last Operational State Change |
| mcPeerEPRefCount |
indicates how many service end-points are referencing this multi-chassis end-point
type=int access=read-only default=0 Displayed(tab/group)=MC-EP Reference Count |
| operationalState |
Specifies the operational state of this multi-chassis peer end-point.
INTEGER < inService ( 0 ) , outOfService ( 1 ) >
type=multichassis.McEndPointOperationalState access=read-only default=outOfService Displayed(tab/group)=Operational State |
| passiveMode |
Specifies the passive mode on the node. When in passive mode the MC-EP pair will be dormant
until 2 of the PWs in a MC-EP will be signaled as active by the remote PEs.
type=boolean default=false Displayed(tab/group)=Passive Mode Enabled |
| passiveModeOperationalState |
indicates whether passive-mode behavior is operationally enabled on this multi-chassis end-point
tunnel.
type=multichassis.McEndPointPassiveModeOperState access=read-only default=disabled Displayed(tab/group)=Passive Mode Operational State |
| peerName |
The name of the MC peer that contains this MC endpoint.
type=string access=read-only default= minimum=0 maximum=32 Displayed(tab/group)=Peer Name |
| systemPriority |
Specifies the system priority for this MC Endpoint. The peer configured with the lowest
value is chosen to be the Master. If system-priorities are equal then the one with the
lowest system-id(chassis MAC address) is chosen as the Master.
type=int default=0 minimum=0 maximum=255 Displayed(tab/group)=System Priority |
| Properties inherited from multichassis.PeerDescendantCommonConfiguration |
|---|
| peerIpAddress, peerIpAddressType, peerSiteId |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| 7750 SR | Supported from 7.0.R1 |
| 7705 SAR Gen 2 | |
| 7705 SAR Hm | |
| 7950 XRS | |
| DC 7850 | Supported from 4.0.0 |
| DC 210 | |
| 7450 ESS | Supported from 7.0.R1 |
| Product Specifics | |
| 7250 IXR 20.0 | |
| 7450 ESS 20.0 | |
| 7450 ESS 21.0 | |
| 7450 ESS 22.0 | |
| 7450 ESS 23.0 | |
| 7450 ESS 24.0 | |
| 7450 ESS 25.0 | |
| 7705 SAR Gen 2 25.0 | |
| 7705 SAR Hm 20.0 | |
| 7705 SAR Hm 21.0 | |
| 7705 SAR Hm 22.0 | |
| 7705 SAR Hm 23.0 | |
| 7705 SAR Hm 24.0 | |
| 7705 SAR Hm 25.0 | |
| 7750 SR 20.0 | |
| 7750 SR 21.0 | |
| 7750 SR 22.0 | |
| 7750 SR 23.0 | |
| 7750 SR 24.0 | |
| 7750 SR 25.0 | |
| 7950 XRS 20.0 | |
| 7950 XRS 21.0 | |
| 7950 XRS 22.0 | |
| 7950 XRS 23.0 | |
| 7950 XRS 24.0 | |
| 7950 XRS 25.0 | |
| DC 210 20.5 | |
| DC 210 5.0 | |
| DC 210 6.0 | |
| DC 7850 20.0 | |
| DC 7850 5.0 | |
| DC 7850 6.0 | |