| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| bfdEnable |
Specifies whether BFD is enabled on the interface.
type=boolean default=false Displayed(tab/group)=Enable BFD |
| discoveryInterval |
Indicates the maximum duration of the discovery interval during which a newly activated multi-chassis
IPsec tunnel-group will remain dormant while trying to contact its redundant peer. Groups held dormant in
this manner will neither pass traffic nor negotiate security keys. This interval ends when either
the redundant peer is contacted and a master election occurs, or when the maximum duration expires.
type=long default=300 minimum=1 maximum=1800 units=seconds Displayed(tab/group)=Discovery Interval |
| discoveryIntervalBoot |
Indicates specifies the maximum duration of an interval immediately following system boot up. When the
normal discovery interval for a group would expire while the post-boot discovery interval is still active, then
the group's discovery interval is extended until the post-boot discovery interval expires. This allows an extension
to the normal discovery stage of groups following a chassis reboot, to account for the larger variance in routing
convergence time
type=long default=300 minimum=1 maximum=1800 units=seconds Displayed(tab/group)=Post-Boot Discovery Interval |
| holdOnNeighborFailure |
Indicates how many keepAliveInterval intervals the standby node will wait for packets from the active node
before assuming a redundant-neighbor node failure.
type=long default=3 minimum=2 maximum=25 Displayed(tab/group)=Lost Connection Wait Multiplier |
| keepAliveInterval |
Indicates the ipsec specific keepalive timer value in units of 0.1 sec. This defines the interval
at which keep-alive messages are exchanged between two systems participating in mutli-chassis ipsec tunnels.
These keep-alive messages are used to determine remote-node failure.
type=long default=10 minimum=5 maximum=500 units=deciseconds Displayed(tab/group)=Keep-Alive Interval |
| multichassis.McPeerIPSecDomain-Set |
type=Children-Set |
| multichassis.McPeerIPSecTunnelGroup-Set |
type=Children-Set |
| Properties inherited from multichassis.PeerDescendantCommonConfiguration |
|---|
| peerIpAddress, peerIpAddressType, peerSiteId |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| 7750 SR |
Supported from 10.0.R5 until 13.0.R4
|
| 7705 SAR Gen 2 | |
| 7705 SAR Hm | |
| 7450 ESS |
Supported from 11.0.R1
|
| Product Specifics | |
| 7450 ESS 20.0 | |
| 7450 ESS 21.0 | |
| 7450 ESS 22.0 | |
| 7450 ESS 23.0 | |
| 7450 ESS 24.0 | |
| 7450 ESS 25.0 | |
| 7705 SAR Gen 2 25.0 | |
| 7705 SAR Hm 20.0 | |
| 7705 SAR Hm 21.0 | |
| 7705 SAR Hm 22.0 | |
| 7705 SAR Hm 23.0 | |
| 7705 SAR Hm 24.0 | |
| 7705 SAR Hm 25.0 | |
| 7750 SR 20.0 | |
| 7750 SR 21.0 | |
| 7750 SR 22.0 | |
| 7750 SR 23.0 | |
| 7750 SR 24.0 | |
| 7750 SR 25.0 | |