| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| allLdpleaf |
Indicates that all the LDP leaf will be ping
type=boolean access=read-only |
| allS2l |
Indicates that all the S2L paths will be ping
type=boolean access=read-only Displayed(tab/group)=Select All S2L Paths (/P2MP RSVP) |
| allSrTreeleaf |
Indicates that all the LDP leaf will be ping
type=boolean access=read-only |
| forwardingClass |
type=qos.FcEnum access=read-only Displayed(tab/group)=Forwarding Class (Test Parameters/Test Packet) |
| groupAddress |
This value specifies the group address of a Point to Multipoint (LDP P2MP) Label Switch Path (LSP) for this OAM P2MP LSP ping test.
This IP address must be valid multicast address.
type=InetAddress access=read-only Displayed(tab/group)=Group Address (/P2MP LDP SSM) |
| groupAddressType |
Specifies the type of Internet address stored in groupAddress
type=rtr.InetAddressType access=read-only |
| ldpP2mplspType |
May only be specified when testTargetType is mLDP.
type=mpls.LdpP2mpLspType access=read-only Displayed(tab/group)=Type (/P2MP LDP) |
| leafIpAddr1 |
Specifies the Internet address of the egress leaf node of a P2MP LSP Tree.
This parameter is not mandatory
type=string access=read-only maximum=32 |
| leafIpAddr2 |
Specifies the Internet address of the egress leaf node of a P2MP LSP Tree.
This parameter is not mandatory
type=string access=read-only maximum=32 |
| leafIpAddr3 |
Specifies the Internet address of the egress leaf node of a P2MP LSP Tree.
This parameter is not mandatory
type=string access=read-only maximum=32 |
| leafIpAddr4 |
Specifies the Internet address of the egress leaf node of a P2MP LSP Tree.
This parameter is not mandatory
type=string access=read-only maximum=32 |
| leafIpAddr5 |
Specifies the Internet address of the egress leaf node of a P2MP LSP Tree.
This parameter is not mandatory
type=string access=read-only maximum=32 |
| optionalTLV |
The value of OptionalTLV specifies which optional Type/Length/Value (TLV) structure to include in the MPLS echo request launched for the specified test.
'vpnRecursiveFec(2)' specifies the proprietary inclusion of an RFC 6512 'VPN-Recursive FEC Element'.
'vpnRecursiveFec(2)' is required to successfully ping a P2MP leaf with the following characteristics:
1. The path between the P2MP root and the targeted leaf is a Virtual Private Network (VPN),
e.g. an SROS Virtual Private Routed Network (VPRN) service. And ..
2. The VPN has an RFC 4364 'Option B' boundary between two Border Gateway Protocol (BGP) Autonomous Systems. And ..
3. The leaf resides on an SROS node (with support for this object) on the far side of the boundary (with respect to the root).
A leaf residing on a non-SROS node may not respond (or may respond with an error) when 'vpnRecursiveFec(2)' is specified.
'none(1)' specifies the inclusion of none of the optional TLVs described above.
type=mpls.OptionalTLVType access=read-only Displayed(tab/group)=Optional TLV (/P2MP LDP) |
| originatingNode |
The network element that is the origin of the test.
type=Pointer access=read-only Displayed(tab/group)=From IP Address (/P2MP LDP SSM), From IP Address (/P2MP Policy) |
| p2mpDynamicLsp |
P2MPDynamicLsp defines an LSP as a point-to-multipoint LSP, which contains one or multiple
S2L (root-to-leaf) paths and allows the source of multicast traffic to forward packets to
one or many multicast receivers over a network.
type=Pointer access=read-only Displayed(tab/group)=P2MP Dynamic LSP (/P2MP RSVP) |
| p2mpId |
May only be specified when testTargetType is mLDP and ldpP2mplspType is Static.
type=Pointer access=read-only Displayed(tab/group)=P2MP ID (/P2MP LDP) |
| p2mpInstance |
The LSP path to test. May only be specified when
testTargetType is lspPath.
type=Pointer access=read-only Displayed(tab/group)=P2MP Instance (/P2MP RSVP) |
| p2mpLspIdPointer |
May only be specified when testTargetType is mLDP and ldpP2mplspType is Dynamic.
type=Pointer access=read-only Displayed(tab/group)=P2MP LSP ID (/P2MP LDP) |
| profile |
Specifies the profile value to be used with the
forwarding class specified in forwardingClass.
type=qos.Profile access=read-only Displayed(tab/group)=Forwarding Profile (Test Parameters/Test Packet) |
| rootAddress |
This value specifies the root address of a Point to Multipoint (LDP P2MP) Label Switch Path (LSP) for this OAM P2MP LSP ping test.
type=InetAddress access=read-only Displayed(tab/group)=Root Address (/P2MP Policy) |
| rootAddressType |
Specifies the type of Internet address stored in rootAddress
type=rtr.InetAddressType access=read-only |
| rootTreeId |
Specifies the rootTreeId of P2mpLspPing.
type=int access=read-only Displayed(tab/group)=Root Tree Id (/P2MP Policy) |
| rootTreeInstId |
Specifies the outermost label time-to-live value.
type=long access=read-only Displayed(tab/group)=Root Tree Instance Id (/P2MP Policy) |
| router |
Specifies the target type of the test. The
target may either be an base or management Routing Instance.
type=mpls.RouterInstanceType access=read-only Displayed(tab/group)=Router Instance (/P2MP LDP SSM/Instance Type) |
| senderAddressType |
Specifies the type of Internet address stored in IpAddr
type=rtr.InetAddressType access=read-only |
| senderaddress |
Specifies a Internet address to send P2MP LSP Ping packets for a particular test
type=InetAddress access=read-only Displayed(tab/group)=Sender Address (/P2MP LDP SSM) |
| serviceId |
type=long access=read-only |
| sourceAddress |
This value specifies the source address of a Point to Multipoint (LDP P2MP) Label Switch Path (LSP) for this OAM P2MP LSP ping test.
This IP address must be valid unicast address.
type=InetAddress access=read-only Displayed(tab/group)=Source Address (/P2MP LDP SSM) |
| sourceAddressType |
Specifies the type of Internet address stored in sourceAddress
type=rtr.InetAddressType access=read-only |
| srcIpAddrPointer |
Specify the source IP address. This is defined when the OAM packet
must be generated from a different address than the node's system interface address.
type=Pointer access=read-only |
| testTargetType |
Specifies the target type of the P2Mp LSP Ping test. The
target may either be an RSVP or mLDP.
A target of RSVP signifies that the targeted test will run against a specific RSVP. A target of mLDP signifies that the targeted test will run against the specified path in an mLDP. The lspPath parameter is mandatory when type is lspPath. type=sas.TestTargetaccess=read-only Displayed(tab/group)=Target Type |
| timeToLive |
Specifies the outermost label time-to-live value.
type=int access=read-only Displayed(tab/group)=Time To Live (Test Parameters/Test Packet) |
| virtualRouterId |
The unique value which identifies this virtual router in the
7x50 SR system. The vRtrID value for each virtual router
must remain constant at least from one re-initialization of the
system management processor (CPM) to the next. There will always
be at least one router entry defined by the agent with vRtrID=1
which represents the base transport router.
type=long access=read-only |
| vprnSitePointer |
type=Pointer access=read-only Displayed(tab/group)=VPRN Instance (/P2MP LDP SSM/Instance Type) |
| Overridden Properties | |
|---|---|
| id | The identifier for the STM test. |
| Properties inherited from sas.ArchivedPing |
|---|
| assurance, id, maxHistoryRows, packetFailureThreshold, packetInterval, packetSize, packetTimeout, packetsToSend, testFailureThreshold, trapGenerationPolicy |
| Properties inherited from sas.AbstractTest |
|---|
| administrativeState, description, displayedName, failures, globalId, id, lastRunResult, runs, weight |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Methods inherited from sas.AbstractTest |
|---|
| execute, stop |