| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| adiminState |
Specifies the administrative state of BFD for this IP address family on this LAG.
type=lag.BFDAdminState default=disabled Displayed(tab/group)=BFD State (BFD) |
| bfdOnEveryLink |
While it is equal to 'false',BFD is not started on certain links, for example LACP Standby links.
type=boolean default=false Displayed(tab/group)=BFD on Distributing Links Only (BFD) |
| familyType |
Specifies the IP address type of this micro BFD session configuration.
type=rtr.InetAddressType access=read-create Mandatory on create Displayed(tab/group)=Family (BFD) |
| lag.MicroBfdSession-Set |
type=Children-Set |
| lagId |
type=int access=read-create default=0 |
| localIP |
Specifies the local IP address.
type=InetAddress Displayed(tab/group)=Local IP Address (BFD) |
| localIPAddressType |
Specifies the address type of localIP, Any value other than 'unknown' must be equal to the value of BFD's Address Type.
type=rtr.InetAddressType default=unknown |
| maxAdminDownTime |
Specifies the maximum time the system will continue to behave as if the micro-BFD session was 'Up',
after the remote system has signalled it as administratively down by means of the 'AdminDown' State indication in
the header of the BFD Control packets. This allows the administrator of this system some time to disable or de-provision the micro-BFD session
before this system stops transmission on the link.
The value '-1' specifies infinity: the 'AdminDown' State indication is ignored forever.
type=int default=0 minimum=-1 maximum=3600 units=seconds Displayed(tab/group)=Max Admin Down Time (BFD) |
| maxSetupTime |
Specifies the maximum time the system will behave as if the micro-BFD session were 'Up',
regardless of the actual state of the micro-BFD session being established. When a link becomes available,
its LACP state immediately transitions from Standby to Active and the system starts to use it for transmission,
assuming that the micro-BFD session setup will succeed. When the micro-BFD session state becomes 'Up', this timer is stopped.
After the this time has elapsed, the state of the micro-BFD session is evaluated to decide the LACP state of the new link.
The value '-1' specifies infinity: the state of the micro-BFD session is ignored forever.
type=int default=-1 minimum=-1 maximum=60000 units=milliseconds Displayed(tab/group)=Max Setup Time (BFD) |
| multiplier |
Specifies the number of consecutive BFD messages that must be missed from the peer before the BFD session state is changed to down.
type=byte default=3 minimum=3 maximum=20 Displayed(tab/group)=Multiplier (BFD) |
| receiveInterval |
Specifies the receive timer for the BFD packets.
type=int default=100 minimum=10 maximum=100000 units=milliseconds Displayed(tab/group)=Receive Interval (BFD) |
| remoteIP |
Specifies the remote (far-end) IP address.
type=InetAddress Displayed(tab/group)=Remote IP Address (BFD) |
| remoteIPAddressType |
Specifies the address type of remote (far-end) IP, Any value other than 'unknown' must be equal to the value of BFD's Address Type.
type=rtr.InetAddressType default=unknown |
| transmitInterval |
Specifies the transmit timer for the BFD packets.
type=int default=100 minimum=10 maximum=100000 units=milliseconds Displayed(tab/group)=Transmit Interval (BFD) |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| 7750 SR |
Supported from 11.0.R4
|
| 7450 ESS |
Supported from 11.0.R4
|
| 7250 IXR |
Supported from 21.10.R1 until 22.10.R1
|
| 7950 XRS | Supported from 11.0.R4 |
| 7705 SAR Hm | |
| 7210 SAS R | Supported from 10.0.R5 |
| 7210 SAS T | Supported from 10.0.R5 |
| 7210 SAS Mxp | Supported from 21.3.R1 |
| 7210 SAS S/Sx |
Supported from 21.3.R1
|
| 7705 SAR | Supported from 22.4.R2 |
| 7705 SAR H | Supported from 22.4.R2 |
| Product Specifics | |
| 7210 SAS Mxp (all versions) | |
| 7210 SAS R (all versions) | |
| 7210 SAS S/Sx (all versions) | |
| 7210 SAS T (all versions) | |
| 7250 IXR 22.0 | |
| 7250 IXR 23.0 | |
| 7250 IXR 24.0 | |
| 7250 IXR 25.0 | |
| 7705 SAR H (all versions) | |
| 7705 SAR (all versions) | |