| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| autonomousSystemNumber |
type=long default=0 minimum=0 maximum=4294967295 Displayed(tab/group)=Autonomous System |
| classForwardingEnabled |
Specifies whether class forwarding is enabled or not. If class forwarding is enabled,
packets are forwarded based on their forwarding class.
type=boolean default=false |
| disableSelectiveFIB |
The value of the object disableSelectiveFIB specifies whether the system-level selective FIB setting is overriden on this routing instance.
If the value of disableSelectiveFIB is set to true,
then the selective FIB is disabled and all active routes of this routing instance are installed on all line cards.
type=boolean default=false Displayed(tab/group)=Disable Selective FIB |
| enableHoldDownTime |
This specifies if hold down timer is enabled or disabled for the router instance.
type=boolean default=false Displayed(tab/group)=Enable Hold-Down Time (/Static Route Hold-Down Time) |
| enforceMaxNumberOfMcastRoutes |
type=boolean default=false |
| fibPriority |
The value of fibPriority specifies the priority of updating set of routes into the forwarding
plane. If the value of fibPriority for the routing instance is set to 'high', the FIB entries
are given priority over all other routes. By default the fibPriority for a VPRN is set to
'standard' which means the FIB entries do not have any preference over other routes.
type=l3fwd.FibPriority default=standard Displayed(tab/group)=FIB Priority |
| fltrCamType |
Specifies the CAM type of the auto-created embedded filters for flowspec rules on this virtual
router.
type=int default=0 Displayed(tab/group)=Filter CAM Type (/Flowspec) enums= 0: normal - Normal 2: pktLen - PktLen |
| holdDownTimeInitial |
It specifies the initial hold-down time.
When the route flaps for the first time the hold-down time is set to this value.
type=int default=0 minimum=0 maximum=65535 Displayed(tab/group)=Initial Hold-Down Time (/Static Route Hold-Down Time) |
| holdDownTimeMax |
It specifies the maximum value of the hold-down time.
type=int default=0 minimum=0 maximum=65535 Displayed(tab/group)=Maximum Hold-Down Time (/Static Route Hold-Down Time) |
| holdDownTimeMultiplier |
It specifies the value by which the previous hold-down time is multiplied to calculate the new
hold-down time.
type=int default=0 minimum=0 maximum=10 Displayed(tab/group)=Hold-Down Time Multiplier (/Static Route Hold-Down Time) |
| ingrPathMgmtPolicyPointer |
Pointer to the instance of the multicast Ingress PathMgmt Info policy.
type=Pointer default=Multicast PathMgmt Info Policy:default |
| ipEmbeddedFlowspecMaxSize |
Specifies the maximum number of entries reserved in the auto-created embedded IP filter
for flowspec rules on this virtual router.
Flowspec rules that do not fit within this limit will be rejected."
type=int default=512 minimum=0 maximum=262143 Displayed(tab/group)=IPv4 Filter Max Size (/Flowspec) |
| ipv6EmbeddedFlowspecMaxSize |
Specifies the maximum number of entries reserved in the auto-created embedded IPv6 filter
for flowspec rules on this virtual router.
Flowspec rules that do not fit within this limit will be rejected."
type=int default=512 minimum=0 maximum=262143 Displayed(tab/group)=IPv6 Filter Max Size (/Flowspec) |
| ipv6TeRouterIntfName |
type=string default=system maximum=32 |
| maxNumberOfEqualCostRoutes |
type=long default=1 minimum=0 maximum=64 Displayed(tab/group)=Maximum Number Of Equal Cost Routes |
| maxNumberOfMcastRoutes |
type=long default=-1 minimum=1 maximum=2147483647 |
| maxNumberOfMcastRoutesLogOnly |
type=generic.TruthValue default=false |
| midRouteMcastThreshold |
type=int default=0 minimum=0 maximum=100 units=% |
| reachableTime |
Specifies the time an IPv6 neighbor remains in reachable state. While in this state, no neighbor-unreachability detection has to be done.
type=long default=30 minimum=30 maximum=3600 units=seconds Displayed(tab/group)=IPv6 Reachable Timer (/IPv6 Timer) |
| routerId |
type=InetAddress default=0.0.0.0 Displayed(tab/group)=Router ID |
| routerIdAdrrType |
type=rtr.InetAddressType default=ipv4 |
| routingInstanceId |
type=int access=read-only default=1 minimum=0 maximum=10240 |
| routingInstanceName |
type=string access=read-only default= minimum=0 maximum=32 |
| singleSfmOverloadAdminState |
Specifies the administrative state of the IGP single-SFM-overload behavior in this virtual
router instance. When the value is equal to 'inService', IGP protocols (either IS-IS or OSPF)
enter an overload state when the node only has a single SFM functioning.
type=l3fwd.AdministrativeState default=outOfService Displayed(tab/group)=Single SFM Overload Admin State (/Single SFM Overload) |
| singleSfmOverloadHldOffTime |
Specifies the delay between the detection of the single-SFM condition and the IGP entering
the overload state.
type=int default=0 minimum=0 maximum=600 units=seconds Displayed(tab/group)=Hold-Off Time (/Single SFM Overload) |
| singleSfmOverloadStart |
Indicates the sysUpTime the last time that the singleSfmOverloadState had a transition from
'notApplicable' or 'normal' to 'overload'. If such a transition never occurred, this object
contains a zero value.
type=Time access=read-only Displayed(tab/group)=Overload Start (/Single SFM Overload) |
| singleSfmOverloadState |
Indicates the IGP single-SFM-overload state.
type=l3fwd.SingleSfmOverloadState access=read-only default=normal Displayed(tab/group)=Overload State (/Single SFM Overload) |
| singleSfmOverloadTime |
Indicates the duration of the most recent overload.
type=Time access=read-only default=0 Displayed(tab/group)=Overload Duration (/Single SFM Overload) |
| staleTime |
Specifies the time an IPv6 neighbor cache entry remains in stale state, for all applicable interfaces in this virtual router instance.
When this time has elapsed, the system removes the neighbor cache entry.
type=long default=14400 minimum=60 maximum=65535 units=seconds Displayed(tab/group)=IPv6 Stale Timer (/IPv6 Timer) |
| weightedEcmp |
The value of weightedEcmp specifies whether to enable or disable weighted ECMP.
type=boolean default=false |
| weightedEcmpStrict |
The value of Strict ECMP specifies whether or not to apply
strict ECMP.
This property is applicable only when Weighted ECMP is set.
type=boolean default=false |
| Properties inherited from fwd.Site |
|---|
| siteId, siteName |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |