| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| allowBgpToIgpExport |
Specifies whether the export of BGP into IGP within the base router is enabled.
It applies to newly received BGP prefixes.
type=boolean default=true Displayed(tab/group)=Allow BGP to IGP Export |
| confederationAutonomousSystemNumber |
This specifies the confederation AS number for the virtual router.
A non-0 value is to be configured first before any member can be added to this confederation AS.
A value of 0 means no confederation AS, thus deletion of all its contained members.
type=long default=0 minimum=0 maximum=4294967295 Displayed(tab/group)=Confederation Autonomous System |
| enableLspBfdSessionTail |
Specifies whether LSP BFD sessions at the tail-end of LSPs are enabled for this routing instance.
type=boolean default=false Displayed(tab/group)=Enable LSP BFD Session for Tail (/LSP BFD) |
| entropyLabel |
The value of entropyLabel specifies whether the use of entropy-label is enabled or not for the router instance.
type=boolean default=false Displayed(tab/group)=Enable Entropy Label |
| fastReroute |
The value of fastReroute specifies whether to enable or disable IP fast re-route capability.
type=boolean default=false Displayed(tab/group)=Fast Re-route |
| icmpTunneling |
Specifies whether ICMP tunneling is enabled or disabled globally on the system.
type=boolean default=false Displayed(tab/group)=ICMP Tunneling |
| ipPoolDistribution |
The value of the object ipPoolDistribution specifies whether the
UE IP allocation is distributed across configured IP pools when more
than one IP pool is configured.
type=boolean default=false Displayed(tab/group)=IP Pool Distribution |
| labelRouteLocal |
Specifies whether or not to enable the propagation of time to live (TTL) for RFC 3107 label
routes at Ingress LER from the header of IP packet into all labels
in the stack for all local packets.
type=l3fwd.TTLPropagateType default=none Displayed(tab/group)=Label-Route Local (/TTL Propagate) |
| labelRouteTransit |
Specifies whether or not to enable the propagation of time to live (TTL) for RFC 3107 label
routes at Ingress LER from the header of IP packet into all labels in the stack for all transit
packets.
type=l3fwd.TTLPropagateType default=none Displayed(tab/group)=Label-Route Transit (/TTL Propagate) |
| ldpShortcutEnabled |
Specifies whether LDP Shortcut is enabled on the node. While enabled, IP packets are being
forwarded over all network interfaces in the system which participate in the IS-IS and OSPF
routing protocols.
type=boolean default=false Displayed(tab/group)=IPv4 (/LDP Shortcut Enabled) |
| ldpShortcutEnabledIpv6 |
Specifies whether IPv6 LDP Shortcut is enabled on the node. While enabled, IP packets are being
forwarded over all network interfaces in the system which participate in the IS-IS and OSPF
routing protocols.
type=boolean default=false Displayed(tab/group)=IPv6 (/LDP Shortcut Enabled) |
| lspBfdMaxTailSession |
Specifies the maximum number of LSP BFD tail sessions for this routing instance. While
'enableLspBfdSessionTail' is enabled, this attribute must be set with a value greater than 0.
While 'enableLspBfdSessionTail' is disabled, this one must be set with value 0.
type=long default=0 minimum=0 maximum=7000 Displayed(tab/group)=Maximum LSP BFD Tail Sessions (/LSP BFD) |
| lspBfdTailEndMultiplier |
Specifies the number of consecutive BFD messages that must be missed from
the peer before the BFD session state is changed to down and the upper level protocols are
notified of the fault.
type=int default=3 minimum=1 maximum=20 Displayed(tab/group)=Multiplier (/LSP BFD) |
| lspBfdTailEndReceiveInterval |
Specifies the BFD receive interval for the LSP tail-end.
type=int default=1000 minimum=100 maximum=1000 units=milliseconds Displayed(tab/group)=Receive Interval (/LSP BFD) |
| lspBfdTailEndTransmitInterval |
Specifies the BFD transmit interval for the LSP tail-end.
type=int default=1000 minimum=100 maximum=1000 units=milliseconds Displayed(tab/group)=Transmit Interval (/LSP BFD) |
| lsrLabelRoute |
Specifies whether or not to enable the propagation of time to live (TTL) for RFC 3107 label
routes at LSR from the header of IP packet into all labels in the stack.
type=l3fwd.TTLPropagateType default=none Displayed(tab/group)=LSR Label-Route (/TTL Propagate) |
| selectiveReassembly |
"The value of selectiveReassembly specifies if the
system can be configured to re-assemble fragmented tunnelled packets
before they can be forwarded to the appropriate MG-ISM group for
processing.
When the value is set to 'true', the system will avoid sending non-fragmented
packets to the re-assembly ISA.
When the value is set to 'false', the system will not divert non-fragments and
both fragments and non-fragments will be sent to the re-assembly ISAs if configured
elsewhere."
type=boolean default=false Displayed(tab/group)=Selective-Reassembly |
| vprnLocal |
Specifies whether or not to enable the propagation of time to live (TTL) at Ingress LER from the
header of IP packet into all labels in the stack for all local packets.
type=l3fwd.VPRNTTLPropagateType default=vcOnly Displayed(tab/group)=VPRN Local (/TTL Propagate) |
| vprnTransit |
Specifies whether or not to enable the propagation of time to live (TTL) at Ingress LER from the
header of IP packet into all labels in the stack for all transit packets.
type=l3fwd.VPRNTTLPropagateType default=vcOnly Displayed(tab/group)=VPRN Transit (/TTL Propagate) |
| Properties inherited from fwd.Site |
|---|
| siteId, siteName |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |