| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| ethernetservice.CustomL2ProfileBinding-Set |
type=Children-Set |
| gvrpTreatment |
Specifies how the bridge handles GVRP PDUs on a UNI. When the Drop
option is selected, the PDUs are discarded and do not enter the
provider network. When the Tunnel option is selected, the PDUs are
allowed to tunnel across the provider network. When the Peer option is
selected, the bridge participates in the protocol, on the assigned
port. When the MAC-Tunnel option is selected, the destination MAC
address of L2 control frames is changed to a unique tunnel MAC address,
specified by the Tunnel MAC parameter.
type=ethernetservice.UniProfileProtocolTreatment default=tunnel Displayed(tab/group)=GVRP |
| stpBpduTreatment |
Specifies how the bridge handles Spanning Tree Protocol BPDUs on a UNI.
When the Drop option is selected, the PDUs are discarded and do not
enter the provider network. When the Tunnel option is selected, the
PDUs are allowed to tunnel across the provider network. When the Peer
option is selected, the bridge participates in the protocol, on the
assigned port. When the MAC-Tunnel option is selected, the destination
MAC address of L2 control frames is changed to a unique tunnel MAC
address, specified by the Tunnel MAC parameter.
type=ethernetservice.UniProfileProtocolTreatment default=tunnel Displayed(tab/group)=STP |
| tunnelMac |
Specifies the MAC address used when configuring a protocol with the MAC-Tunnel option.
type=MacAddress default=01-00-0C-CD-CD-D0 Displayed(tab/group)=Tunnel MAC |
| uni8021ABTagTreatment |
This object describes the behavior of the bridge in regards to the IEEE 802.1AB PDU
frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of the protocol to be discarded
and not enter the provider network. Peer (3) and MAC-Tunnel(4) are not supported.
type=ethernetservice.UniProfileProtocolTreatment default=drop Displayed(tab/group)=802.1AB Tagged |
| uni8021ABTreatement |
Specifies how the bridge handles IEEE 802.1AB PDUs on a UNI. When the
Drop option is selected, the PDUs are discarded and do not enter the
provider network. When the Tunnel option is selected, the PDUs are
allowed to tunnel across the provider network. When the Peer option is
selected, the bridge participates in the protocol, on the assigned
port. When the MAC-Tunnel option is selected, the destination MAC
address of L2 control frames is changed to a unique tunnel MAC address,
specified by the Tunnel MAC parameter.
type=ethernetservice.UniProfileProtocolTreatment default=drop Displayed(tab/group)=802.1AB |
| uni8021ABUnTagTreatment |
This object describes the behavior of the bridge in regards to the IEEE 802.1AB PDU
frames received on the UNI. Tunnel(1) is not supported.
Discard (2) causes the PDU of the protocol to be discarded
and not enter the provider network. Peer (3) means that on this port the bridge
is to participate in the protocol. MAC-Tunnel (4) is not supported.
type=ethernetservice.UniProfileProtocolTreatment default=drop Displayed(tab/group)=802.1AB Untagged |
| uni8021xTreatment |
Specifies how the bridge handles IEEE 802.1x PDUs on a UNI. When the
Drop option is selected, the PDUs are discarded and do not enter the
provider network. When the Tunnel option is selected, the PDUs are
allowed to tunnel across the provider network. When the Peer option is
selected, the bridge participates in the protocol, on the assigned
port. When the MAC-Tunnel option is selected, the destination MAC
address of L2 control frames is changed to a unique tunnel MAC address,
specified by the Tunnel MAC parameter.
type=ethernetservice.UniProfileProtocolTreatment default=drop Displayed(tab/group)=802.1x |
| uni8023adTreatment |
Specifies how the bridge handles IEEE 802.3ad PDUs on a UNI. When the
Drop option is selected, the PDUs are discarded and do not enter the
provider network. When the Tunnel option is selected, the PDUs are
allowed to tunnel across the provider network. When the Peer option is
selected, the bridge participates in the protocol, on the assigned
port. When the MAC-Tunnel option is selected, the destination MAC
address of L2 control frames is changed to a unique tunnel MAC address,
specified by the Tunnel MAC parameter.
type=ethernetservice.UniProfileProtocolTreatment default=peer Displayed(tab/group)=802.3ad |
| uniAmapTreatment |
Specifies how the bridge handles AMAP PDUs on a UNI. When the Drop
option is selected, the PDUs are discarded and do not enter the
provider network. When the Tunnel option is selected, the PDUs are
allowed to tunnel across the provider network. When the Peer option is
selected, the bridge participates in the protocol, on the assigned
port. When the MAC-Tunnel option is selected, the destination MAC
address of L2 control frames is changed to a unique tunnel MAC address,
specified by the Tunnel MAC parameter.
type=ethernetservice.UniProfileProtocolTreatment default=drop Displayed(tab/group)=AMAP |
| uniCdpTreatment |
Specifies how the bridge handles CDP PDUs on a UNI.
When the Drop option is selected, the PDUs are discarded and do not enter the provider network.
When the Tunnel option is selected, the PDUs are allowed to tunnel across the provider network.
When the Peer option is selected, the bridge participates in the protocol, on the assigned port.
When the MAC-Tunnel option is selected, the destination MAC address of L2 control frames is changed
to a unique tunnel MAC address, specified by the Tunnel MAC parameter
type=ethernetservice.UniProfileProtocolTreatment default=drop Displayed(tab/group)=CDP |
| uniDtpTreatment |
Specifies how the bridge handles Dynamic Trunking Protocol PDUs on a UNI.
When the Drop option is selected, the PDUs are discarded and do not enter
the provider network. When the Tunnel option is selected, the PDUs are
allowed to tunnel across the provider network. When the Peer option is
selected, the bridge participates in the protocol, on the assigned
port. When the MAC-Tunnel option is selected, the destination MAC
address of L2 control frames is changed to a unique tunnel MAC address,
specified by the Tunnel MAC parameter.
type=ethernetservice.UniProfileProtocolTreatment default=drop Displayed(tab/group)=DTP |
| uniLacpTreatment |
Specifies how the bridge handles Link Aggregation Control Protocol
marker PDUs on a UNI. When the Drop option is selected, the PDUs are
discarded and do not enter the provider network. When the Tunnel option
is selected, the PDUs are allowed to tunnel across the provider
network. When the Peer option is selected, the bridge participates in
the protocol, on the assigned port. When the MAC-Tunnel option is
selected, the destination MAC address of L2 control frames is changed
to a unique tunnel MAC address, specified by the Tunnel MAC parameter.
type=ethernetservice.UniProfileProtocolTreatment default=peer Displayed(tab/group)=LACPMARKER |
| uniMvrpTreatment |
Specifies how the bridge handles Multiple VLAN Registration Protocol
PDUs on a UNI. When the Drop option is selected, the PDUs are discarded
and do not enter the provider network. When the Tunnel option is
selected, the PDUs are allowed to tunnel across the provider network.
When the Peer option is selected, the bridge participates in the
protocol, on the assigned port. When the MAC-Tunnel option is selected,
the destination MAC address of L2 control frames is changed to a unique
tunnel MAC address, specified by the Tunnel MAC parameter.
type=ethernetservice.UniProfileProtocolTreatment default=tunnel Displayed(tab/group)=MVRP |
| uniOamTreatment |
Specifies how the bridge handles OAM PDUs on a UNI. When the Drop
option is selected, the PDUs are discarded and do not enter the
provider network. When the Tunnel option is selected, the PDUs are
allowed to tunnel across the provider network. When the Peer option is
selected, the bridge participates in the protocol, on the assigned
port. When the MAC-Tunnel option is selected, the destination MAC
address of L2 control frames is changed to a unique tunnel MAC address,
specified by the Tunnel MAC parameter.
type=ethernetservice.UniProfileProtocolTreatment default=peer Displayed(tab/group)=OAM |
| uniPagpTreatment |
Specifies how the bridge handles Port Aggregation Protocol PDUs on a
UNI. When the Drop option is selected, the PDUs are discarded and do
not enter the provider network. When the Tunnel option is selected, the
PDUs are allowed to tunnel across the provider network. When the Peer
option is selected, the bridge participates in the protocol, on the
assigned port. When the MAC-Tunnel option is selected, the destination
MAC address of L2 control frames is changed to a unique tunnel MAC
address, specified by the Tunnel MAC parameter.
type=ethernetservice.UniProfileProtocolTreatment default=drop Displayed(tab/group)=PAGP |
| uniPvstTreatment |
Specifies how the bridge handles Per-VLAN Spanning Tree PDUs on a UNI.
When the Drop option is selected, the PDUs are discarded and do not
enter the provider network. When the Tunnel option is selected, the
PDUs are allowed to tunnel across the provider network. When the Peer
option is selected, the bridge participates in the protocol, on the
assigned port. When the MAC-Tunnel option is selected, the destination
MAC address of L2 control frames is changed to a unique tunnel MAC
address, specified by the Tunnel MAC parameter.
type=ethernetservice.UniProfileProtocolTreatment default=drop Displayed(tab/group)=PVST |
| uniUdldTreatment |
Specifies how the bridge handles Unidirectional Link Detection PDUs on
a UNI. When the Drop option is selected, the PDUs are discarded and do
not enter the provider network. When the Tunnel option is selected, the
PDUs are allowed to tunnel across the provider network. When the Peer
option is selected, the bridge participates in the protocol, on the
assigned port. When the MAC-Tunnel option is selected, the destination
MAC address of L2 control frames is changed to a unique tunnel MAC
address, specified by the Tunnel MAC parameter.
type=ethernetservice.UniProfileProtocolTreatment default=peer Displayed(tab/group)=UDLD |
| uniUplinkTreatment |
Specifies how the bridge handles UPLINK PDUs on a UNI. When the Drop
option is selected, the PDUs are discarded and do not enter the
provider network. When the Tunnel option is selected, the PDUs are
allowed to tunnel across the provider network. When the Peer option is
selected, the bridge participates in the protocol, on the assigned
port. When the MAC-Tunnel option is selected, the destination MAC
address of L2 control frames is changed to a unique tunnel MAC address,
specified by the Tunnel MAC parameter.
type=ethernetservice.UniProfileProtocolTreatment default=drop Displayed(tab/group)=UPLINK |
| uniVlanTreatment |
Specifies how the bridge handles VLAN PDUs on a UNI. When the Drop
option is selected, the PDUs are discarded and do not enter the
provider network. When the Tunnel option is selected, the PDUs are
allowed to tunnel across the provider network. When the Peer option is
selected, the bridge participates in the protocol, on the assigned
port. When the MAC-Tunnel option is selected, the destination MAC
address of L2 control frames is changed to a unique tunnel MAC address,
specified by the Tunnel MAC parameter.
type=ethernetservice.UniProfileProtocolTreatment default=drop Displayed(tab/group)=VLAN |
| uniVtpTreatment |
Specifies how the bridge handles VLAN Trunk Protocol PDUs on a UNI.
When the Drop option is selected, the PDUs are discarded and do not
enter the provider network. When the Tunnel option is selected, the
PDUs are allowed to tunnel across the provider network. When the Peer
option is selected, the bridge participates in the protocol, on the
assigned port. When the MAC-Tunnel option is selected, the destination
MAC address of L2 control frames is changed to a unique tunnel MAC
address, specified by the Tunnel MAC parameter.
type=ethernetservice.UniProfileProtocolTreatment default=drop Displayed(tab/group)=VTP |
| Overridden Properties | |
|---|---|
| displayedName |
A label given to uniquely identify this profile. Must be at least one character long.
access=read-create minimum=1 maximum=32 |
| Properties inherited from policy.PolicyObject |
|---|
| description, displayedName, globalPolicy, id, isLocal, policyType, siteId, siteName, templateObject |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |