| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| duration |
Specifies the test duration.
type=long access=read-only default=0 units=seconds Displayed(tab/group)=Duration (/Dual Ended Loss Results) |
| frameLossLocal |
Specifies the number of frames lost during this test at the near-end.
type=UInt128 access=read-only default=0 Displayed(tab/group)=Lost Frames - Local (/Dual Ended Loss Results) |
| frameLossPeer |
Specifies the number of frames lost during this test at the far-end.
type=UInt128 access=read-only default=0 Displayed(tab/group)=Lost Frames - Peer (/Dual Ended Loss Results) |
| frameLossRatioLocal |
Specifies the percentage of frames lost during this test at the near-end.
type=float access=read-only default=0 minimum=0 maximum=100 units=% Displayed(tab/group)=Lost Frame Ratio - Local (/Dual Ended Loss Results) |
| frameLossRatioPeer |
Specifies the percentage of frames lost during this test at the far-end.
type=float access=read-only default=0 minimum=0 maximum=100 units=% Displayed(tab/group)=Lost Frame Ratio - Peer (/Dual Ended Loss Results) |
| graceRx |
The value of tmnxDot1agCfmMepDbGraceRx indicates whether the
remote peer is transmitting a grace period notification or not.
type=boolean access=read-only default=false Displayed(tab/group)=Grace Period RX |
| intfStatus |
Specifies the if CC messaging is returned for remote MEP.
type=ethernetoam.Dot1agCfmInterfaceStatus access=read-only default=isNoInterfaceStatusTLV Displayed(tab/group)=Interface Status |
| lastCCM |
Specifies if CC messaging is returned for remote MEP.
type=Time access=read-only default=0 Displayed(tab/group)=Last CCM |
| localMepId |
Specifies the local MEP ID.
type=long access=read-only |
| macAddress |
Specifies the MAC address for remote MEP.
type=MacAddress access=read-only default=00-00-00-00-00-00 Displayed(tab/group)=MAC Address |
| maintenanceAssociationId |
Specifies the Maintenance Entity Group for the remote MEP list.
type=long access=read-only |
| maintenanceDomainId |
Specifies the maintenance domain for the remote MEP list.
type=long access=read-only |
| portStatus |
An enumerated value of the Port status TLV received in the
last CCM from the remote MEP or the default value
psNoPortStateTLV indicating either no CCM has been received,
or that nor port status TLV was received in the last CCM.
type=ethernetoam.Dot1agCfmPortSatus access=read-only default=psNoPortStateTLV Displayed(tab/group)=Port Status |
| rdiFlag |
State of the RDI bit in the last received CCM (true for
RDI=1), or false if none has been received.
type=boolean access=read-only default=false Displayed(tab/group)=Rdi |
| remoteMepDbState |
Specifies the DB state for remote MEP.
type=boolean access=read-only default=false Displayed(tab/group)=RemoteState |
| remoteMepId |
The identifier for remote MEP.
type=long access=read-create default=0 minimum=1 maximum=8191 Displayed(tab/group)=MEP ID |
| rxFramesLocal |
Specifies the number of frames received during this test by the near-end.
type=UInt128 access=read-only default=0 Displayed(tab/group)=Rx Frames - Local (/Dual Ended Loss Results) |
| rxFramesPeer |
Specifies the number of frames received during this test by the far-end.
type=UInt128 access=read-only default=0 Displayed(tab/group)=Rx Frames - Peer (/Dual Ended Loss Results) |
| rxLmrCcmCount |
Specifies the number of CCM frames received for this Dual-Ended Loss test.
type=long access=read-only default=0 Displayed(tab/group)=Received CCM Frames (/Dual Ended Loss Results) |
| siteId |
The site ID for this Remote MEP.
type=string access=read-only default=0.0.0.0 maximum=50 |
| txFramesLocal |
Specifies the number of frames transmitted during this test by the near-end.
type=UInt128 access=read-only default=0 Displayed(tab/group)=Tx Frames - Local (/Dual Ended Loss Results) |
| txFramesPeer |
Specifies the number of frames transmitted during this test by the far-end.
type=UInt128 access=read-only default=0 Displayed(tab/group)=Tx Frames - Peer (/Dual Ended Loss Results) |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| 7450 ESS | Supported from 7.0.R1 |
| 7750 SR | Supported from 7.0.R1 |
| 7705 SAR H | |
| 7705 SAR | |
| DC VSC | |
| DC 7850 | |
| DC 210 | |
| DC VSA8 | |
| 7950 XRS | |
| Wavence SM | Supported from 20.1.0 |
| Product Specifics | |
| 7450 ESS 20.0 | |
| 7450 ESS 21.0 | |
| 7450 ESS 22.0 | |
| 7450 ESS 23.0 | |
| 7450 ESS 24.0 | |
| 7450 ESS 25.0 | |
| 7705 SAR H 20.0 | |
| 7705 SAR H 21.0 | |
| 7705 SAR H 22.0 | |
| 7705 SAR H 23.0 | |
| 7705 SAR H 24.0 | |
| 7705 SAR H 25.0 | |
| 7705 SAR H 9.0 | |
| 7705 SAR 20.0 | |
| 7705 SAR 21.0 | |
| 7705 SAR 22.0 | |
| 7705 SAR 23.0 | |
| 7705 SAR 24.0 | |
| 7705 SAR 25.0 | |
| 7750 SR 20.0 | |
| 7750 SR 21.0 | |
| 7750 SR 22.0 | |
| 7750 SR 23.0 | |
| 7750 SR 24.0 | |
| 7750 SR 25.0 | |
| 7950 XRS 20.0 | |
| 7950 XRS 21.0 | |
| 7950 XRS 22.0 | |
| 7950 XRS 23.0 | |
| 7950 XRS 24.0 | |
| 7950 XRS 25.0 | |
| DC 210 20.5 | |
| DC 210 5.0 | |
| DC 210 6.0 | |
| DC 7850 20.0 | |
| DC 7850 5.0 | |
| DC 7850 6.0 | |
| DC VSA8 5.0 | |
| DC VSA8 6.0 | |
| DC VSC 20.0 | |
| DC VSC 5.0 | |
| DC VSC 6.0 | |
| Wavence SM 20A.0.0 | |
| Wavence SM 21A.0.0 | |
| Wavence SM 22.0.0 | |
| Wavence SM 22A.0.0 | |
| Wavence SM 23.0.0 | |
| Wavence SM 23A.0.0 | |
| Wavence SM 24.0.0 | |
| Wavence SM 25.0.0 | |