|
Properties |
|
currentNumberOfSAATestsPeriodicThreshold |
The value of sessionCount indicates the number of OAM
sessions currently allocated on this node.
One OAM session is allocated when a test is configured (in the case of
some test types) or activated (in the remaining cases). Tests with the
following test types allocate OAM sessions:
1. SDP keep-alive.
2. Static route CPE check.
3. Filter redirect policy ping test.
4. VRRP policy host unreachable ping test.
5. Any OAM or SAA test configured using TIMETRA-OAM-TEST-MIB.
The session is freed when the test is deactivated or deleted.
tmnxOamSysSessionCount will not exceed tmnxOamSysSessionLimit.
Configuration or activation of a test will fail when tmnxOamSysSessionCount equals tmnxOamSysSessionLimit.
DEPRECATED: 21.2 R1 - OBSOLETE : No longer supported
type=long
access=read-only
default=0
units=sessions
|
|
currentNumberOfSAATestsPeriodicThresholdEnabled |
DEPRECATED: 21.2 R1 - OBSOLETE : No longer supported
type=boolean
access=read-only
default=false
units=sessions
|
|
currentTxRateForContinousTestsPeriodicThreshold |
The value of cfgTotalTx indicates this node's current
total configured echo request packet transmission rate, for the set of
tests listed in the tmnxOamSysPerfCfgLimitTx DESCRIPTION clause.
For example, suppose:
a) several SDP keep-alive sessions are enabled, total 1000 echo
request packets per second, and
b) several SAA continuous tests are enabled, total 2000 echo
request packets per second, and
c) no other relevant tests are enabled.
Then, tmnxOamSysPerfCfgTotalTx will have the value 3000.
The value of tmnxOamSysPerfCfgTotalTx will not exceed the value of
tmnxOamSysPerfCfgLimitTx.
DEPRECATED: 21.2 R1 - OBSOLETE : No longer supported
type=long
access=read-only
default=0
units=packets per second
|
|
currentTxRateForContinousTestsPeriodicThresholdEnabled |
DEPRECATED: 21.2 R1 - OBSOLETE : No longer supported
type=boolean
access=read-only
default=false
units=packets per second
|
|
totalNumberOfEchoRequestPacketsReceivedPeriodicThreshold |
The value of remoteTestRx indicates this node's total
number of echo request packets received from remotely initiated tests
(since the last clear).
type=long
access=read-only
default=0
units=number of packets
|
|
totalNumberOfEchoRequestPacketsReceivedPeriodicThresholdEnabled |
type=boolean
access=read-only
default=false
units=number of packets
|
|
totalNumberOfEchoRequestPacketsTransmittedPeriodicThreshold |
The value of localTestTx indicates this node's total
number of echo request packets transmitted by locally initiated tests
(since the last clear). The test types are listed in the
tmnxOamSysPerfOprLimitTx DESCRIPTION clause.
type=long
access=read-only
default=0
units=number of packets
|
|
totalNumberOfEchoRequestPacketsTransmittedPeriodicThresholdEnabled |
type=boolean
access=read-only
default=false
units=number of packets
|