Overview Package Class Deprecated Help

ethernetoam
OamSysPerfStats

CfmPacketCountStats contains objects for Ethernet CFM packet statistics.

public class OamSysPerfStats

Stats For:
netw.NetworkElement

Properties
backgroundIcmpBRGtestSessionsCount The value of tmnxOamSysBgIcmpBrgSessionCount indicates the number of background ICMP Bridged Residential Gateway (BRG) OAM test sessions currently allocated on this node.

type=long
access=read-only
default=0
backgroundIcmpBRGtestSessionsLimit The value of tmnxOamSysBgIcmpBrgSessionLimit indicates the maximum number of background ICMP Bridged Residential Gateway (BRG) OAM test sessions available.

type=long
access=read-only
default=0
currentNumberOfSAATests The value of sessionCount indicates the number of OAM sessions currently allocated on this node. One OAM session is allocated when a test is configured (in the case of some test types) or activated (in the remaining cases). Tests with the following test types allocate OAM sessions: 1. SDP keep-alive. 2. Static route CPE check. 3. Filter redirect policy ping test. 4. VRRP policy host unreachable ping test. 5. Any OAM or SAA test configured using TIMETRA-OAM-TEST-MIB. The session is freed when the test is deactivated or deleted. tmnxOamSysSessionCount will not exceed tmnxOamSysSessionLimit. Configuration or activation of a test will fail when tmnxOamSysSessionCount equals tmnxOamSysSessionLimit.

DEPRECATED: 21.2 R1 - OBSOLETE : No longer supported
type=long
access=read-only
default=0
units=sessions
currentNumberOfSAATestsPeriodic The value of sessionCount indicates the number of OAM sessions currently allocated on this node. One OAM session is allocated when a test is configured (in the case of some test types) or activated (in the remaining cases). Tests with the following test types allocate OAM sessions: 1. SDP keep-alive. 2. Static route CPE check. 3. Filter redirect policy ping test. 4. VRRP policy host unreachable ping test. 5. Any OAM or SAA test configured using TIMETRA-OAM-TEST-MIB. The session is freed when the test is deactivated or deleted. tmnxOamSysSessionCount will not exceed tmnxOamSysSessionLimit. Configuration or activation of a test will fail when tmnxOamSysSessionCount equals tmnxOamSysSessionLimit.

DEPRECATED: 21.2 R1 - OBSOLETE : No longer supported
type=long
access=read-only
default=0
units=sessions
currentTxRateForContinousTests The value of cfgTotalTx indicates this node's current total configured echo request packet transmission rate, for the set of tests listed in the tmnxOamSysPerfCfgLimitTx DESCRIPTION clause. For example, suppose: a) several SDP keep-alive sessions are enabled, total 1000 echo request packets per second, and b) several SAA continuous tests are enabled, total 2000 echo request packets per second, and c) no other relevant tests are enabled. Then, tmnxOamSysPerfCfgTotalTx will have the value 3000. The value of tmnxOamSysPerfCfgTotalTx will not exceed the value of tmnxOamSysPerfCfgLimitTx.

DEPRECATED: 21.2 R1 - OBSOLETE : No longer supported
type=long
access=read-only
default=0
units=packets per second
currentTxRateForContinousTestsPeriodic The value of cfgTotalTx indicates this node's current total configured echo request packet transmission rate, for the set of tests listed in the tmnxOamSysPerfCfgLimitTx DESCRIPTION clause. For example, suppose: a) several SDP keep-alive sessions are enabled, total 1000 echo request packets per second, and b) several SAA continuous tests are enabled, total 2000 echo request packets per second, and c) no other relevant tests are enabled. Then, tmnxOamSysPerfCfgTotalTx will have the value 3000. The value of tmnxOamSysPerfCfgTotalTx will not exceed the value of tmnxOamSysPerfCfgLimitTx.

DEPRECATED: 21.2 R1 - OBSOLETE : No longer supported
type=long
access=read-only
default=0
units=packets per second
lastClearStatsTime The value of lastClearedTime indicates the sysUpTime when the following statistics were cleared: tmnxOamSysPerfLocalTestTx, tmnxOamSysPerfRemoteTestRx, and tmnxOamSysPerfReqTypeTable. If the statistics have not been cleared since the last CPM restart, zero is returned. A packet count which is time stamped by this object can be converted to an average packets per second value using, for example, pps = tmnxOamSysPerfLocalTestTx / [(sysUpTime - tmnxOamSysPerfLastClearedTime)/100].

type=Time
access=read-only
default=0
lspSelfPingSessCount The value of tmnxOamSysLspSelfPingSessCount indicates the number of LSP Self Ping sessions currently allocated on this node. One session is allocated as required after LSP Self Ping is administratively enabled on an LSP (using TIMETRA-MPLS-MIB::vRtrMplsLspExtSelfPing). tmnxOamSysLspSelfPingSessCount will not exceed tmnxOamSysLspSelfPingSessLimit. Creating an LSP Self Ping session will fail when tmnxOamSysLspSelfPingSessCount equals tmnxOamSysLspSelfPingSessLimit

type=long
access=read-only
default=0
lspSelfPingSessLimit The value of tmnxOamSysLspSelfPingSessLimit indicates the maximum number of LSP Self Ping sessions available on this node. Sessions are allocated as described in the tmnxOamSysLspSelfPingSessCount DESCRIPTION clause.

type=long
access=read-only
default=0
lspSelfPingTxCapacityCount The value of tmnxOamSysPerfCfgLspSelfTxTotal indicates this node's current total configured echo request packet transmission rate for LSP Self Pings. An LSP Self Ping is started as required after LSP Self Ping is administratively enabled on an LSP (using TIMETRA-MPLS-MIB::vRtrMplsLspExtSelfPing). The value of tmnxOamSysPerfCfgLspSelfTxTotal will not exceed the value of tmnxOamSysPerfCfgLspSelfTxLimit.

type=long
access=read-only
default=0
units=packets per second
lspSelfPingTxCapacityLimit The value of tmnxOamSysPerfCfgLspSelfTxLimit indicates this node's upper bound on the total configured echo request packet transmission rate for LSP Self Pings. The upper bound is enforced to avoid echo request packet transmit overload, i.e. to ensure each enabled test can transmit echo request packets at the test's configured rate. Echo reply packets are not affected by this limit.

type=long
access=read-only
default=0
units=packets per second
maxNumberOfSAATests The value of sessionLimit indicates the maximum number of OAM sessions available on this node. OAM sessions are allocated and freed as described in the tmnxOamSysSessionCount DESCRIPTION clause.

DEPRECATED: 21.2 R1 - OBSOLETE : No longer supported
type=long
access=read-only
default=0
maxTxRateForAllOamTests The value of oprLimitTx indicates this node's upper bound on the total echo request packet transmission rate. Echo reply packets are not affected by this limit. The upper bound applies to echo request packets sent by the following test types: 1. SDP keep-alive. 2. Static route CPE check. 3. Filter redirect policy ping test. 4. VRRP policy host unreachable ping test. 5. Any OAM or SAA test configured using TIMETRA-OAM-TEST-MIB.

DEPRECATED: 21.2 R1 - OBSOLETE : No longer supported
type=long
access=read-only
default=0
units=packets per second
maxTxRateForContinousTests The value of cfgLimitTx indicates this node's upper bound on the total configured echo request packet transmission rate for a set of test types. The upper bound is enforced to avoid echo request packet transmit overload, i.e. to ensure each enabled test can transmit echo request packets at the test's configured rate. Echo reply packets are not affected by this limit. The upper bound applies to echo request packets sent by the following 'always on' test types: 1. SDP keep-alive. 2. Static route CPE check. 3. Filter redirect policy ping test. 4. VRRP policy host unreachable ping test. 5. SAA continuous test (see tmnxOamSaaCtlContinuous). For example, suppose: a) tmnxOamSysPerfCfgLimitTx has the value 4000 echo request packets per second, and b) several SDP keep-alive sessions are enabled, total 1000 echo request packets per second, and c) several SAA continuous tests are enabled, total 3000 echo request packets per second. Then, an attempt to enable an additional SAA continuous test would be rejected with a 'resourceUnavailable(13)' error.

DEPRECATED: 21.2 R1 - OBSOLETE : No longer supported
type=long
access=read-only
default=0
units=packets per second
totalNumberOfEchoRequestPacketsReceived The value of remoteTestRx indicates this node's total number of echo request packets received from remotely initiated tests (since the last clear).

type=long
access=read-only
default=0
units=number of packets
totalNumberOfEchoRequestPacketsReceivedPeriodic The value of remoteTestRx indicates this node's total number of echo request packets received from remotely initiated tests (since the last clear).

type=long
access=read-only
default=0
units=number of packets
totalNumberOfEchoRequestPacketsTransmitted The value of localTestTx indicates this node's total number of echo request packets transmitted by locally initiated tests (since the last clear). The test types are listed in the tmnxOamSysPerfOprLimitTx DESCRIPTION clause.

type=long
access=read-only
default=0
units=number of packets
totalNumberOfEchoRequestPacketsTransmittedPeriodic The value of localTestTx indicates this node's total number of echo request packets transmitted by locally initiated tests (since the last clear). The test types are listed in the tmnxOamSysPerfOprLimitTx DESCRIPTION clause.

type=long
access=read-only
default=0
units=number of packets
  
Properties inherited from log.CurrentData
alarmedObjectClass, alarmedObjectPointer, createdOnPollType, displayedName, historyCreated, logRecordClass, monitoredObjectClass, monitoredObjectPointer, monitoredObjectSiteId, monitoredObjectSiteName, periodicTime, suspect, timeCaptured, timeLogged, updatedOnPollType
 
Properties inherited from ManagedObject
actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed
 
Supporting MIBs
TIMETRA-OAM-TEST-MIB.tmnxOamSysBgIcmpBrgSessionCount 7450 ESS 14.0, 15.0, 15.1, 16.0, 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7950 XRS 14.0, 15.0, 15.1, 16.0, 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7750 SR 14.0, 15.0, 15.1, 16.0, 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7250 IXR 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
TIMETRA-OAM-TEST-MIB.tmnxOamSysBgIcmpBrgSessionLimit 7450 ESS 14.0, 15.0, 15.1, 16.0, 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7950 XRS 14.0, 15.0, 15.1, 16.0, 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7750 SR 14.0, 15.0, 15.1, 16.0, 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7250 IXR 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
TIMETRA-OAM-TEST-MIB.tmnxOamSysLspSelfPingSessCount 7450 ESS 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7950 XRS 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7750 SR 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7250 IXR 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
TIMETRA-OAM-TEST-MIB.tmnxOamSysLspSelfPingSessLimit 7450 ESS 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7950 XRS 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7750 SR 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7250 IXR 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
TIMETRA-OAM-TEST-MIB.tmnxOamSysPerfCfgLimitTx 7450 ESS 11.0, 12.0, 13.0, 14.0, 15.0, 15.1, 16.0, 19.0, 20.0
7950 XRS 12.0, 13.0, 14.0, 15.0, 15.1, 16.0, 19.0, 20.0
7210 SAS Dxp 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS K 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS M 10.0
7210 SAS Mxp 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS R 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS T 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7710 SR 12.0
7750 SR 12.0, 13.0, 14.0, 15.0, 15.1, 16.0, 19.0, 20.0
7250 IXR 19.0, 20.0
7210 SAS S/Sx 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
TIMETRA-OAM-TEST-MIB.tmnxOamSysPerfCfgLspSelfTxLimit 7450 ESS 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7950 XRS 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7750 SR 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7250 IXR 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
TIMETRA-OAM-TEST-MIB.tmnxOamSysPerfCfgLspSelfTxTotal 7450 ESS 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7950 XRS 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7750 SR 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7250 IXR 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
TIMETRA-OAM-TEST-MIB.tmnxOamSysPerfCfgTotalTx 7450 ESS 11.0, 12.0, 13.0, 14.0, 15.0, 15.1, 16.0, 19.0, 20.0
7950 XRS 12.0, 13.0, 14.0, 15.0, 15.1, 16.0, 19.0, 20.0
7210 SAS Dxp 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS K 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS M 10.0
7210 SAS Mxp 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS R 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS T 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7710 SR 12.0
7750 SR 12.0, 13.0, 14.0, 15.0, 15.1, 16.0, 19.0, 20.0
7250 IXR 19.0, 20.0
7210 SAS S/Sx 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
TIMETRA-OAM-TEST-MIB.tmnxOamSysPerfLastClearedTime 7450 ESS 11.0, 12.0, 13.0, 14.0, 15.0, 15.1, 16.0, 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7950 XRS 12.0, 13.0, 14.0, 15.0, 15.1, 16.0, 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS Dxp 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS K 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS M 10.0
7210 SAS Mxp 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS R 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS T 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7710 SR 12.0
7750 SR 12.0, 13.0, 14.0, 15.0, 15.1, 16.0, 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7250 IXR 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS S/Sx 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
TIMETRA-OAM-TEST-MIB.tmnxOamSysPerfLocalTestTx 7450 ESS 11.0, 12.0, 13.0, 14.0, 15.0, 15.1, 16.0, 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7950 XRS 12.0, 13.0, 14.0, 15.0, 15.1, 16.0, 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS Dxp 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS K 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS M 10.0
7210 SAS Mxp 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS R 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS T 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7710 SR 12.0
7750 SR 12.0, 13.0, 14.0, 15.0, 15.1, 16.0, 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7250 IXR 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS S/Sx 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
TIMETRA-OAM-TEST-MIB.tmnxOamSysPerfOprLimitTx 7450 ESS 11.0, 12.0, 13.0, 14.0, 15.0, 15.1, 16.0, 19.0, 20.0
7950 XRS 12.0, 13.0, 14.0, 15.0, 15.1, 16.0, 19.0, 20.0
7210 SAS Dxp 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS K 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS M 10.0
7210 SAS Mxp 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS R 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS T 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7710 SR 12.0
7750 SR 12.0, 13.0, 14.0, 15.0, 15.1, 16.0, 19.0, 20.0
7250 IXR 19.0, 20.0
7210 SAS S/Sx 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
TIMETRA-OAM-TEST-MIB.tmnxOamSysPerfRemoteTestRx 7450 ESS 11.0, 12.0, 13.0, 14.0, 15.0, 15.1, 16.0, 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7950 XRS 12.0, 13.0, 14.0, 15.0, 15.1, 16.0, 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS Dxp 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS K 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS M 10.0
7210 SAS Mxp 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS R 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS T 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7710 SR 12.0
7750 SR 12.0, 13.0, 14.0, 15.0, 15.1, 16.0, 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7250 IXR 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS S/Sx 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
TIMETRA-OAM-TEST-MIB.tmnxOamSysSessionCount 7450 ESS 11.0, 12.0, 13.0, 14.0, 15.0, 15.1, 16.0, 19.0, 20.0
7950 XRS 12.0, 13.0, 14.0, 15.0, 15.1, 16.0, 19.0, 20.0
7210 SAS Dxp 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS K 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS M 10.0
7210 SAS Mxp 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS R 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS T 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7710 SR 12.0
7750 SR 12.0, 13.0, 14.0, 15.0, 15.1, 16.0, 19.0, 20.0
7250 IXR 19.0, 20.0
7210 SAS S/Sx 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
TIMETRA-OAM-TEST-MIB.tmnxOamSysSessionLimit 7450 ESS 11.0, 12.0, 13.0, 14.0, 15.0, 15.1, 16.0, 19.0, 20.0
7950 XRS 12.0, 13.0, 14.0, 15.0, 15.1, 16.0, 19.0, 20.0
7210 SAS Dxp 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS K 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS M 10.0
7210 SAS Mxp 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS R 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS T 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7710 SR 12.0
7750 SR 12.0, 13.0, 14.0, 15.0, 15.1, 16.0, 19.0, 20.0
7250 IXR 19.0, 20.0
7210 SAS S/Sx 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
Supported Network Elements
7450 ESS Supported from 10.0.R1
7750 SR Supported from 10.0.R1
DC VSC
DC 7850
DC 210
DC VSA8
7950 XRS
7210 SAS R Supported from 10.0.R5
7210 SAS M Supported from 10.0.R5
7210 SAS T Supported from 10.0.R5
7210 SAS Mxp Supported from 10.0.R5
7210 SAS K Supported from 10.0.R5
7210 SAS S/Sx Supported from 10.0.R5
7210 SAS Dxp
7250 IXR Supported from 19.10.R1
Product Specifics
7250 IXR 20.0
7250 IXR 21.0
7250 IXR 22.0
7250 IXR 23.0
7250 IXR 24.0
7250 IXR 25.0
7450 ESS 20.0
7450 ESS 21.0
7450 ESS 22.0
7450 ESS 23.0
7450 ESS 24.0
7450 ESS 25.0
7750 SR 20.0
7750 SR 21.0
7750 SR 22.0
7750 SR 23.0
7750 SR 24.0
7750 SR 25.0
7950 XRS 20.0
7950 XRS 21.0
7950 XRS 22.0
7950 XRS 23.0
7950 XRS 24.0
7950 XRS 25.0