|
Properties |
|
backgroundSharedPoolMaximumLimit |
The value of backgroundSharedPoolMaximumLimit indicates this node's
upper bound on the total configured echo request packet transmission
rate for the test types listed in the tmnxOamBackgSharedTxTotal DESCRIPTION
clause. The upper bound is enforced to avoid echo
request packet transmit overload, i.e. to ensure each enabled test can
transmit echo request packets at the test's configured rate.
Echo reply packets are not affected by this limit.
type=long
access=read-only
default=0
units=packets per second
|
|
backgroundSharedPoolMaximumTotal |
The value of backgroundSharedPoolMaximumTotal indicates this node's current
total configured echo request packet transmission rate, for the
following 'always on' test types:
1. Background ICMP Bridged Residential Gateway ping test.
2. Filter redirect policy ping test.
3. SDP keep-alive.
4. VRRP policy host unreachable ping test.
5. SAA continuous test (see tmnxOamSaaCtlContinuous).
6. Static Route CPE-Check ping test.
The value of tmnxOamBackgSharedTxTotal will not exceed the value of
tmnxOamBackgSharedTxLimit.
type=long
access=read-only
default=0
units=packets per second
|
|
backgroundStaticRouteCpeCheckTestsCount |
The value of backgroundStaticRouteCpeCheckTestsCount indicates the number of
static route Customer Premises Equipment (CPE) Check sessions
currently allocated on this node.
One session is allocated by setting
TIMETRA-VRTR-MIB::vRtrInetStaticRouteCpeAddrType to a non-default
value.
tmnxOamSysCpeCheckStRtSessCount will not exceed
tmnxOamSysCpeCheckStRtSessLimit.
Creating a static route CPE-Check session will fail when
tmnxOamSysCpeCheckStRtSessCount equals
tmnxOamSysCpeCheckStRtSessLimit.
type=long
access=read-only
default=0
|
|
backgroundStaticRouteCpeCheckTestsLimit |
The value of backgroundStaticRouteCpeCheckTestsLimit indicates the maximum
number of static route Customer Premises Equipment (CPE) Check
sessions available on this node.
Sessions are allocated as described in the
tmnxOamSysCpeCheckStRtSessCount DESCRIPTION clause.
type=long
access=read-only
default=0
|
|
backgroundStaticRouteCpeCheckTxCapacityLimit |
The value of backgroundStaticRouteCpeCheckTxCapacityLimit indicates this node's
upper bound on the total configured echo request packet transmission
rate for Customer Premises Equipment (CPE) Check pings on static
routes.
The upper bound is enforced to avoid echo request packet transmit
overload, i.e. to ensure each enabled test can transmit echo request
packets at the test's configured rate.
Echo reply packets are not affected by this limit.
type=long
access=read-only
default=0
units=packets per second
|
|
backgroundStaticRouteCpeCheckTxCapacityTotal |
The value of backgroundStaticRouteCpeCheckTxCapacityTotal indicates this node's
current total configured echo request packet transmission rate for
Customer Premises Equipment (CPE) Check pings on static routes.
CPE Check pings on static routes are started by setting
TIMETRA-VRTR-MIB::vRtrInetStaticRouteCpeAddrType to a non-default
value.
The value of tmnxOamSysCfgCpeCheckStRtTxTotal will not exceed the
value of tmnxOamSysCfgCpeCheckStRtTxLimit.
type=long
access=read-only
default=0
units=packets per second
|
|
currentNumberOfTests |
The value of tmnxOamSysTestCount indicates this nodes's total number of tests
with the following test types:
1. Filter redirect policy ping test.
2. SDP keep-alive.
3. Static route CPE check.
4. VRRP policy host unreachable ping test.
5. Any OAM or SAA test configured using TIMETRA-OAM-TEST-MIB.
currentNumberOfTests will not exceed maxNumberOfTests.
Creating a test with one of the test types above will fail when
tmnxOamSysTestCount equals tmnxOamSysTestLimit."
type=long
access=read-only
default=0
|
|
currentNumberOfTxCapacity |
The value of currentNumberOfTxCapacity indicates this node's upper bound on the total configured
echo request packet transmission rate for the test types listed in the maxNumberOfTxCapacity
DESCRIPTION clause. The upper bound is enforced to avoid echo request packet transmit overload,
i.e. to ensure each enabled test can transmit echo request packets at the test's configured rate.
Echo reply packets are not affected by this limit.
type=long
access=read-only
default=0
units=packets per second
|
|
maxNumberOfTests |
The value of maxNumberOfTests indicates this node's maximum number of tests with the
test types listed in currentNumberOfTests."
type=long
access=read-only
default=0
|
|
maxNumberOfTxCapacity |
The value of maxNumberOfTxCapacity indicates this node's current total configured echo request
packet transmission rate, for the following 'always on' test types:
1. Background ICMP Bridged Residential Gateway ping test.
2. Filter redirect policy ping test.
3. SDP keep-alive.
4. Static route CPE check.
5. VRRP policy host unreachable ping test.
6. SAA continuous test (see tmnxOamSaaCtlContinuous).
The value of maxNumberOfTxCapacity will not exceed the value of currentNumberOfTxCapacity.
type=long
access=read-only
default=0
units=packets per second
|
|
sharedResourcePoolMaximumLimit |
The value of sharedResourcePoolMaximumLimit indicates this node's
upper bound on the total configured echo request packet transmission
rate for the test types listed in the tmnxOamSysShareTxTotal DESCRIPTION
clause. The upper bound is enforced to avoid echo
request packet transmit overload, i.e. to ensure each enabled test can
transmit echo request packets at the test's configured rate.
Echo reply packets are not affected by this limit.
type=long
access=read-only
default=0
units=packets per second
|
|
sharedResourcePoolMaximumTotal |
The value of tmnxOamSysShareTxTotal indicates this node's current
total configured echo request packet transmission rate, for the
following 'always on' test types:
1. Background ICMP Bridged Residential Gateway ping test.
2. Filter redirect policy ping test.
3. SDP keep-alive.
4. Static Route CPE-Check ping test.
5. VRRP policy host unreachable ping test.
6. SAA continuous test (see tmnxOamSaaCtlContinuous).
7. OAM-PM proactive tests (e.g. a test created using
TIMETRA-OAM-PM-MIB::tmnxOamPmCfgDelayDmmRowStatus with
TIMETRA-OAM-PM-MIB::tmnxOamPmCfgSessType ='proactive(1)').
The value of tmnxOamSysShareTxTotal will not exceed the value of
tmnxOamSysShareTxLimit.
type=long
access=read-only
default=0
units=packets per second
|