| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| cardStatsTCAProfileId |
DEPRECATED: 23.4 - No longer applicable to any supported nodes type=int access=read-only default=0 |
| cardStatsTCAProfilePointer |
DEPRECATED: 23.4 - No longer applicable to any supported nodes type=Pointer access=read-only default= |
| packetIntervalUnits |
Specifies the interval units for this test.
type=ethernetoam.PacketIntervalUnitsType access=read-only default=seconds Displayed(tab/group)=Packet Interval Units (/MEP Transmit SLM Information), Packet Interval Units (Test Parameters/Execution Details) |
| packetSize |
Specifies the the number of octets in the Value field of the Data TLV of
the Ethernet CFM Loopback packet.
If zero is specified, the packet has no Data TLV.
type=int access=read-only default=0 Displayed(tab/group)=Size (Test Parameters/Execution Details) |
| testStatus |
Specifies the operational state of the two-way Synthetic Loss Measurement (SLM) test.
Similar with TestAdminState from sasTypes.
To issue a two-way SLM test the user must issue an SNMP SET on this object with a value 'enabled
(1)'.
To abort the two-way SLM test issue an SNMP SET on this object with the value 'disabled (2)'.
A read on this object represents the current state of the two-way SLM test:
enabled (1) - The test is actively running and attempts at modifying any two-way SLM object will
be rejected
disabled (2) - The test is not running. Once the test is complete this object will revert to the
default value 'disabled (2)'.
type=sas.TestAdminState access=read-only default=enabled |
| trapGenerationPolicy |
Specifies when the node sends traps while executing the
test.
type=sas.PingTrapGenerationPolicy access=read-only default=testCompletion Displayed(tab/group)=Trap Generation (Results Configuration) |
| twDataSize |
Specifies the data size, in bytes, contained in the padding TLV for the two-way Synthetic Loss
Measurement (SLM) test. A value of zero (0) specifies that no padding TLV is inserted in the
SLM packet. Any non-zero value will increase the packet size by the specified data size plus
3 bytes for the TLV header.
type=int access=read-only default=0 Displayed(tab/group)=Data Size (/MEP Transmit SLM Information) |
| twInterval |
Specifies the delay, in seconds,
between Synthetic Loss Measurement (SLM) messages for the two-way SLM test.
type=int access=read-only default=5 Displayed(tab/group)=Interval (/MEP Transmit SLM Information) |
| twIntervalReDef |
Specifies the delay, in seconds, milliseconds and minutes
between Synthetic Loss Measurement (SLM) messages for the two-way SLM test.
type=ethernetoam.TwIntervalReDef access=read-only default=1sec Displayed(tab/group)=Interval (/MEP Transmit SLM Information) |
| twPriority |
Specifies the priority used in the generated test frame for the two-way
Synthetic Loss Measurement (SLM) test.
type=int access=read-only default=7 Displayed(tab/group)=Priority (/MEP Transmit SLM Information) |
| twSendCount |
Specifies the number of Synthetic Loss Measurement (SLM) packets to send during the two-way SLM
test.
type=int access=read-only default=1 Displayed(tab/group)=Number of Test Packets (/MEP Transmit SLM Information) |
| twTestId |
Specifies the test identifier used to initiate the two-way Synthetic Loss Measurement (SLM)
test.
type=int access=read-only |
| twTimeout |
Specifies the time-out value, in seconds, to wait for a Synthetic Loss Measurement (SLM)
message
to reply for the two-way SLM test.
Upon expiration of the timeout period, the agent assumes that the message response will not be
received. Any response received after the timeout period has expired is silently discarded.
type=int access=read-only default=5 Displayed(tab/group)=Timeout (/MEP Transmit SLM Information) |
| Overridden Properties | |
|---|---|
| id | The identifier for the STM test. |
| Properties inherited from ethernetoam.DeployedAbstractCfmDiagnostic |
|---|
| id, maintenanceAssociationId, maintenanceDomainId, mepId, mepIdEnabled, mepTargetMacAddr, mepTargetMepId, originatingMep, originatingNode, siteId |
| Properties inherited from ethernetoam.DeployedAbstractCfmTest |
|---|
| globalMA, id |
| Properties inherited from sas.DeployedPseudoTest |
|---|
| assurance, fcQueue, forwardingClass, id, maxHistoryRows, packetFailureThreshold, packetInterval, packetTimeout, packetsToSend, profile, testFailureThreshold |
| Properties inherited from sas.AbstractTest |
|---|
| administrativeState, description, displayedName, failures, globalId, id, lastRunResult, runs, weight |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Methods inherited from sas.AbstractTest |
|---|
| execute, stop |
| Product Specifics | |
|---|---|
| 7750 SR 20.0 | |
| 7750 SR 21.0 | |
| 7750 SR 22.0 | |
| 7750 SR 23.0 | |