| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| lbmInterval |
The value of tmnxDot1agCfmMepTxLbmInterval specifies the duration, in deciseconds,
between loopback PDU transmissions. A value of zero is only valid if there are 5 or
fewer loopbacks in the test (as defined by dot1agCfmMepTransmitLbmMessages).
type=int access=read-only default=0 Displayed(tab/group)=LBM Interval (/MEP Transmit LBM Information) |
| lbmPadOrSize |
This non-deployed property exists in the model to distinguish whether to use
the lbmPadding (tmnxDot1agCfmMepLbmPaddingSize) or mepTransmitLbmDataTlv
(Dot1agCfmmepTransmitLbmDataTlv) property.
type=ethernetoam.LbmPadOrSize access=read-only default=size Displayed(tab/group)=Data TLV Size or Padding (/MEP Transmit LBM Information) |
| lbmPadding |
The value of tmnxDot1agCfmMepLbmPaddingSize specifies the number of additional
octets inserted into the LBM PDU for the Data TLV padding. If
tmnxDot1agCfmMepLbmPaddingSize is set to zero (0), no Data TLV will be added to
the LBM PDUs. Note that setting this value is mutually exclusive with setting
dot1agCfmMepTransmitLbmDataTlv.
type=int access=read-only default=0 Displayed(tab/group)=LBM Padding Size (/MEP Transmit LBM Information) |
| lbmTimeout |
The value of tmnxDot1agCfmMepTxLbmTimeout specifies the duration, in seconds,
a loopback PDU sent by the node is considered to be timed out.
type=int access=read-only default=5 Displayed(tab/group)=LBM Timeout (/MEP Transmit LBM Information) |
| mepLbrBadMsdu |
Specifies number incorrect LB messages received.
type=int access=read-only default=0 |
| mepLbrIn |
Specifies the number of received loopback.
type=int access=read-only default=0 |
| mepLbrInOutOfOrder |
Specifies the number of valid, out of order LB.
type=int access=read-only default=0 |
| mepLbrOut |
Specifies the number of loopback replies transmitted.
type=int access=read-only default=0 |
| mepTransmitLbmDataTlv |
Specifies the size of the loopback message.
type=int access=read-only default=0 Displayed(tab/group)=Data Size (/MEP Transmit LBM Information) |
| mepTransmitLbmDestMacAddress |
Specifies the destination MAC address for the LB.
DEPRECATED: 7.0R4 - OBSOLETE: Use AbstractCfmDiagnostic.mepTargetMacAddr instead type=MacAddress access=read-only default=00-00-00-00-00-00 |
| mepTransmitLbmMessages |
Specifies the number of loopback messages to be transmitted.
type=int access=read-only default=1 Displayed(tab/group)=Number of Test Packets (/MEP Transmit LBM Information) |
| mepTransmitLbmResultOK |
Specifies LBM result
type=boolean access=read-only default=false |
| mepTransmitLbmStatus |
Specifies whether the loopback is currently transmitting.
type=boolean access=read-only default=false |
| mepTransmitLbmTargetIsMepId |
Specifies if the target is a MEP ID.
type=boolean access=read-only default=false |
| mepTransmitLbmVlanDropEnable |
Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame
type=boolean access=read-only default=true Displayed(tab/group)=VLAN Drop Enable (/MEP Transmit LBM Information) |
| mepTransmitLbmVlanPriority |
Specifies the priority of the loopback message.
type=int access=read-only default=0 Displayed(tab/group)=VLAN Priority (/MEP Transmit LBM Information) |
| multicast |
Set to true for CFM Loopback multicast tests.
type=boolean access=read-only default=false Displayed(tab/group)=Multicast (/MEP Transmit Information) |
| packetSize |
Specifies the size of the OAM Echo message.
This parameter is optional and is valid only if tmnxOamPingCtlTestMode
has a value of 'sdpPing', 'macPing', 'lspPing', 'vprnPing',
'mfibPing', 'vccvPing', 'icmpPing', 'p2mpLspPing', 'ethCfmLoopback' or
'ethCfmTwoWaySlm'.
The minimum, maximum, and default values for the
tmnxOamPingCtlTestMode cases are:
'ethCfmLoopback' : 0, 1500, 0
'ethCfmTwoWaySlm': 0, 1500, 0
type=int access=read-only default=0 Displayed(tab/group)=Size (Test Parameters/Execution Details) |
| testInterval |
Specifies the interval for this test.
type=int access=read-only default=10 Displayed(tab/group)=Test Interval (Test Parameters/Execution Details) |
| trapGenerationPolicy |
Specifies when the node sends traps while executing the
test.
type=sas.PingTrapGenerationPolicy access=read-only default=testCompletion Displayed(tab/group)=Trap Generation (Results Configuration) |
| Overridden Properties | |
|---|---|
| id | The identifier for the STM test. |
| Properties inherited from ethernetoam.DeployedAbstractCfmDiagnostic |
|---|
| id, maintenanceAssociationId, maintenanceDomainId, mepId, mepIdEnabled, mepTargetMacAddr, mepTargetMepId, originatingMep, originatingNode, siteId |
| Properties inherited from ethernetoam.DeployedAbstractCfmTest |
|---|
| globalMA, id |
| Properties inherited from sas.DeployedPseudoTest |
|---|
| assurance, fcQueue, forwardingClass, id, maxHistoryRows, packetFailureThreshold, packetInterval, packetTimeout, packetsToSend, profile, testFailureThreshold |
| Properties inherited from sas.AbstractTest |
|---|
| administrativeState, description, displayedName, failures, globalId, id, lastRunResult, runs, weight |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Methods inherited from sas.AbstractTest |
|---|
| execute, stop |
| Product Specifics | |
|---|---|
| 7750 SR 20.0 | |
| 7750 SR 21.0 | |
| 7750 SR 22.0 | |
| 7750 SR 23.0 | |