ethernetoam
ArchivedCfmTwoWayDelayTest

Archived test. Defines the Y1731 TwoWayDelayTest. Each TwoWayDelay test is sent from a MEP to a destination MAC address or remote MEP ID of another node in the system. This test can be used to verify MEP-MEP connectivity in the network.



public class ArchivedCfmTwoWayDelayTest

Properties
cardStatsTCAProfileId

DEPRECATED: 23.4 - No longer applicable to any supported nodes
type=int
access=read-only

cardStatsTCAProfilePointer

DEPRECATED: 23.4 - No longer applicable to any supported nodes
type=Pointer
access=read-only

dataSize

type=int
access=read-only
Displayed(tab/group)=Data Size (/MEP Transmit DMM Information)

mepTwoWayDelayPriority Specifies the two way delay priority.

type=int
access=read-only
Displayed(tab/group)=VLAN Priority (/MEP Transmit DMM Information)

packetIntervalUnits Specifies the units for tmnxOamPingCtlInterval. For example, if tmnxOamPingCtlIntervalUnits has the value 'centiseconds(2)', and tmnxOamPingCtlInterval has the value 10, the test's interval is 0.1 seconds. The supported combinations of tmnxOamPingCtlIntervalUnits, tmnxOamPingCtlInterval, tmnxOamPingCtlTestMode, and tmnxOamIcmpPingCtlRapid are specified in the tmnxOamPingCtlInterval DESCRIPTION clause. The interaction between this object and tmnxOamIcmpPingCtlRapid is specified in the tmnxOamIcmpPingCtlRapid DESCRIPTION clause.

type=ethernetoam.PacketIntervalUnitsType
access=read-only
Displayed(tab/group)=Packet Interval Units (Test Parameters/Execution Details)

packetSize Specifies the the number of octets in the Value field of the Data TLV of the Ethernet CFM Loopback packet. If zero is specified, the packet has no Data TLV.

type=int
access=read-only
Displayed(tab/group)=Size (Test Parameters/Execution Details)

testInterval Specifies the interval for this test.

type=int
access=read-only
Displayed(tab/group)=Test Interval (Test Parameters/Execution Details)

trapGenerationPolicy Specifies when the node sends traps while executing the test.

type=sas.PingTrapGenerationPolicy
access=read-only
Displayed(tab/group)=Trap Generation (Results Configuration)

 
Overridden Properties
id The identifier for the STM test.

 
Properties inherited from ethernetoam.ArchivedAbstractCfmDiagnostic
id, maintenanceAssociationId, maintenanceDomainId, mepId, mepTargetMacAddr, originatingMep, originatingNode, serviceId, serviceType, siteId, targetMep, toNodeId
 
Properties inherited from ethernetoam.ArchivedAbstractCfmTest
globalMA, id
 
Properties inherited from sas.ArchivedPseudoTest
assurance, fcQueue, forwardingClass, id, maxHistoryRows, packetFailureThreshold, packetInterval, packetTimeout, packetsToSend, profile, testFailureThreshold
 
Properties inherited from sas.ArchivedTest
accountingFiles, accountingPolicyObjectPointer, continuousExec, ethernetSwitchCardId, fromNodeId, nePersistent, neSchedulable, neTestIndex, neTestOwner, nmUser, originatingTest, ownerType, testResultStorage, testSuite, testSuiteId, testSuiteTestedEntity, testType, testedObject
 
Properties inherited from sas.AbstractTest
administrativeState, description, displayedName, failures, globalId, id, lastRunResult, runs, weight
 
Properties inherited from ManagedObject
actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed
 
Methods inherited from sas.AbstractTest
execute, stop