ethernetoam.ArchivedCfmLoopback (NSP Network Functions Manager

ethernetoam
ArchivedCfmLoopback

Archived test. Defines the 802.1ag loopback. Each loopback test is sent from a MEP to a destination MAC address of another node in the system. This test can be used to verify MEP-MEP connectivity in the network.

Parent Hierarchy
- mpls.LspManager
  - mpls.BypassOnlyLsp
    - sas.OneTimeValidationResult
      - ethernetoam.ArchivedCfmLoopback [lsp:[from-${sourceNodeId}][-id-${*pathId}]:[onetime-][${*id}]:[arc-][cfm-lo-][${*id}][-${fromNodeId}]]
  - mpls.DynamicLsp
    - sas.OneTimeValidationResult
      - ethernetoam.ArchivedCfmLoopback [lsp:[from-${sourceNodeId}][-id-${*pathId}]:[onetime-][${*id}]:[arc-][cfm-lo-][${*id}][-${fromNodeId}]]
  - mpls.SegmentRoutingTeLsp
    - sas.OneTimeValidationResult
      - ethernetoam.ArchivedCfmLoopback [lsp:[from-${sourceNodeId}][-id-${*pathId}]:[onetime-][${*id}]:[arc-][cfm-lo-][${*id}][-${fromNodeId}]]
  - mpls.StaticLsp
    - sas.OneTimeValidationResult
      - ethernetoam.ArchivedCfmLoopback [lsp:[from-${sourceNodeId}][-id-${*pathId}]:[onetime-][${*id}]:[arc-][cfm-lo-][${*id}][-${fromNodeId}]]
- parent []
  - sas.OneTimeValidationResult
    - ethernetoam.ArchivedCfmLoopback [[service-${*id}]:[onetime-][${*id}]:[arc-][cfm-lo-][${*id}][-${fromNodeId}]]
- netw.Network
  - netw.NetworkElement
    - rtr.VirtualRouter
      - rtr.SegmentRoutingPolicy
        
        rtr.SegmentRoutingStaticPolicy
        
        sas.OneTimeValidationResult
        
        ethernetoam.ArchivedCfmLoopback [[network]:[${systemAddress}]:[router-${*routingInstanceId}]:[srpol]:[srstpol-${policyName}]:[onetime-][${*id}]:[arc-][cfm-lo-][${*id}][-${fromNodeId}]]
    - sas.NeAgent
      - ethernetoam.ArchivedCfmLoopback [[network]:[${systemAddress}]:[sas]:[arc-][cfm-lo-][${*id}][-${fromNodeId}]]
- service.CompositeServiceManager
  - service.CompositeService
    - sas.OneTimeValidationResult
      - ethernetoam.ArchivedCfmLoopback [comp-svc-mgr:[cmp-service-${*id}]:[onetime-][${*id}]:[arc-][cfm-lo-][${*id}][-${fromNodeId}]]
- service.ServiceManager
  - apipe.Apipe
    - sas.OneTimeValidationResult
      - ethernetoam.ArchivedCfmLoopback [svc-mgr:[service-${*id}]:[onetime-][${*id}]:[arc-][cfm-lo-][${*id}][-${fromNodeId}]]
  - cpipe.Cpipe
    - sas.OneTimeValidationResult
      - ethernetoam.ArchivedCfmLoopback [svc-mgr:[service-${*id}]:[onetime-][${*id}]:[arc-][cfm-lo-][${*id}][-${fromNodeId}]]
  - epipe.Epipe
    - sas.OneTimeValidationResult
      - ethernetoam.ArchivedCfmLoopback [svc-mgr:[service-${*id}]:[onetime-][${*id}]:[arc-][cfm-lo-][${*id}][-${fromNodeId}]]
  - fpipe.Fpipe
    - sas.OneTimeValidationResult
      - ethernetoam.ArchivedCfmLoopback [svc-mgr:[service-${*id}]:[onetime-][${*id}]:[arc-][cfm-lo-][${*id}][-${fromNodeId}]]
  - hpipe.Hpipe
    - sas.OneTimeValidationResult
      - ethernetoam.ArchivedCfmLoopback [svc-mgr:[service-${*id}]:[onetime-][${*id}]:[arc-][cfm-lo-][${*id}][-${fromNodeId}]]
  - ies.Ies
    - sas.OneTimeValidationResult
      - ethernetoam.ArchivedCfmLoopback [svc-mgr:[service-${*id}]:[onetime-][${*id}]:[arc-][cfm-lo-][${*id}][-${fromNodeId}]]
  - ipipe.Ipipe
    - sas.OneTimeValidationResult
      - ethernetoam.ArchivedCfmLoopback [svc-mgr:[service-${*id}]:[onetime-][${*id}]:[arc-][cfm-lo-][${*id}][-${fromNodeId}]]
  - mirror.Mirror
    - sas.OneTimeValidationResult
      - ethernetoam.ArchivedCfmLoopback [svc-mgr:[service-${*id}]:[onetime-][${*id}]:[arc-][cfm-lo-][${*id}][-${fromNodeId}]]
  - mpr.BackhaulService
    - sas.OneTimeValidationResult
      - ethernetoam.ArchivedCfmLoopback [svc-mgr:[service-${*id}]:[onetime-][${*id}]:[arc-][cfm-lo-][${*id}][-${fromNodeId}]]
  - mvpls.Mvpls
    - sas.OneTimeValidationResult
      - ethernetoam.ArchivedCfmLoopback [svc-mgr:[service-${*id}]:[onetime-][${*id}]:[arc-][cfm-lo-][${*id}][-${fromNodeId}]]
  - pbbvlan.VlanPBBEdge
    - sas.OneTimeValidationResult
      - ethernetoam.ArchivedCfmLoopback [svc-mgr:[service-${*id}]:[onetime-][${*id}]:[arc-][cfm-lo-][${*id}][-${fromNodeId}]]
  - vlan.Vlan
    - sas.OneTimeValidationResult
      - ethernetoam.ArchivedCfmLoopback [svc-mgr:[service-${*id}]:[onetime-][${*id}]:[arc-][cfm-lo-][${*id}][-${fromNodeId}]]
  - vpls.Vpls
    - sas.OneTimeValidationResult
      - ethernetoam.ArchivedCfmLoopback [svc-mgr:[service-${*id}]:[onetime-][${*id}]:[arc-][cfm-lo-][${*id}][-${fromNodeId}]]
  - vprn.Vprn
    - sas.OneTimeValidationResult
      - ethernetoam.ArchivedCfmLoopback [svc-mgr:[service-${*id}]:[onetime-][${*id}]:[arc-][cfm-lo-][${*id}][-${fromNodeId}]]
- svt.Manager
  - svt.Tunnel
    - sas.OneTimeValidationResult
      - ethernetoam.ArchivedCfmLoopback [[serviceTunnel]:[from-${sourceNodeId}][-id-${*pathId}]:[onetime-][${*id}]:[arc-][cfm-lo-][${*id}][-${fromNodeId}]]

Children Hierarchy
- ethernetoam.ArchivedCfmLoopback

Relationships
- many ethernetoam.ArchivedCfmLoopbacks may be direct children of one sas.NeAgent (child-parent relationship)
- many ethernetoam.ArchivedCfmLoopbacks may be direct children of one sas.OneTimeValidationResult (child-parent relationship)

ArchivedCfmLoopback

Relative Name=[[arc-][cfm-lo-][${*id}][-${fromNodeId}]]

Displayed Name=Archived CFM Loopback

Properties
lbmInterval	The value of tmnxDot1agCfmMepTxLbmInterval specifies the duration, in deciseconds, between loopback PDU transmissions. A value of zero is only valid if there are 5 or fewer loopbacks in the test (as defined by dot1agCfmMepTransmitLbmMessages). type=int access=read-only Displayed(tab/group)=LBM Interval (/MEP Transmit LBM Information)
lbmPadding	The value of tmnxDot1agCfmMepLbmPaddingSize specifies the number of additional octets inserted into the LBM PDU for the Data TLV padding. If tmnxDot1agCfmMepLbmPaddingSize is set to zero (0), no Data TLV will be added to the LBM PDUs. Note that setting this value is mutually exclusive with setting dot1agCfmMepTransmitLbmDataTlv. type=int access=read-only Displayed(tab/group)=LBM Padding Size (/MEP Transmit LBM Information)
lbmTimeout	The value of tmnxDot1agCfmMepTxLbmTimeout specifies the duration, in seconds, a loopback PDU sent by the node is considered to be timed out. type=int access=read-only Displayed(tab/group)=LBM Timeout (/MEP Transmit LBM Information)
mepLbrBadMsdu	Specifies number incorrect LB messages received. type=int access=read-only
mepLbrIn	Specifies the number of received loopback. type=int access=read-only
mepLbrInOutOfOrder	Specifies the number of valid, out of order LB. type=int access=read-only
mepLbrOut	Specifies the number of loopback replies transmitted. type=int access=read-only
mepTransmitLbmDataTlv	Specifies the size of the loopback message. type=int access=read-only Displayed(tab/group)=Data Size (/MEP Transmit LBM Information)
mepTransmitLbmDestMacAddress	Specifies the destination MAC address for the LB. DEPRECATED: 7.0R4 - OBSOLETE: Use AbstractCfmDiagnostic.mepTargetMacAddr instead type=MacAddress access=read-only
mepTransmitLbmMessages	Specifies the number of loopback messages to be transmitted. type=int access=read-only Displayed(tab/group)=Number of Test Packets (/MEP Transmit LBM Information)
mepTransmitLbmResultOK	Specifies LBM result type=boolean access=read-only
mepTransmitLbmStatus	Specifies whether the loopback is currently transmitting. type=boolean access=read-only
mepTransmitLbmTargetIsMepId	Specifies if the target is a MEP ID. type=boolean access=read-only
mepTransmitLbmVlanDropEnable	Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame type=boolean access=read-only Displayed(tab/group)=VLAN Drop Enable (/MEP Transmit LBM Information)
mepTransmitLbmVlanPriority	Specifies the priority of the loopback message. type=int access=read-only Displayed(tab/group)=VLAN Priority (/MEP Transmit LBM Information)
multicast	Set to true for CFM Loopback multicast tests. type=boolean access=read-only Displayed(tab/group)=Multicast (/MEP Transmit Information)
packetSize	Specifies the size of the OAM Echo message. This parameter is optional and is valid only if tmnxOamPingCtlTestMode has a value of 'sdpPing', 'macPing', 'lspPing', 'vprnPing', 'mfibPing', 'vccvPing', 'icmpPing', 'p2mpLspPing', 'ethCfmLoopback' or 'ethCfmTwoWaySlm'. The minimum, maximum, and default values for the tmnxOamPingCtlTestMode cases are: 'ethCfmLoopback' : 0, 1500, 0 'ethCfmTwoWaySlm': 0, 1500, 0 type=int access=read-only Displayed(tab/group)=Size (Test Parameters/Execution Details)
testInterval	Specifies the interval for this test. type=int access=read-only Displayed(tab/group)=Test Interval (Test Parameters/Execution Details)
trapGenerationPolicy	Specifies when the node sends traps while executing the test. type=sas.PingTrapGenerationPolicy access=read-only Displayed(tab/group)=Trap Generation (Results Configuration)

Properties

lbmInterval

The value of tmnxDot1agCfmMepTxLbmInterval specifies the duration, in deciseconds, between loopback PDU transmissions. A value of zero is only valid if there are 5 or fewer loopbacks in the test (as defined by dot1agCfmMepTransmitLbmMessages).

type=int
access=read-only
Displayed(tab/group)=LBM Interval (/MEP Transmit LBM Information)

lbmPadding

The value of tmnxDot1agCfmMepLbmPaddingSize specifies the number of additional octets inserted into the LBM PDU for the Data TLV padding. If tmnxDot1agCfmMepLbmPaddingSize is set to zero (0), no Data TLV will be added to the LBM PDUs. Note that setting this value is mutually exclusive with setting dot1agCfmMepTransmitLbmDataTlv.

type=int
access=read-only
Displayed(tab/group)=LBM Padding Size (/MEP Transmit LBM Information)

lbmTimeout

The value of tmnxDot1agCfmMepTxLbmTimeout specifies the duration, in seconds, a loopback PDU sent by the node is considered to be timed out.

type=int
access=read-only
Displayed(tab/group)=LBM Timeout (/MEP Transmit LBM Information)

mepLbrBadMsdu

Specifies number incorrect LB messages received.

type=int
access=read-only

mepLbrIn

Specifies the number of received loopback.

type=int
access=read-only

mepLbrInOutOfOrder

Specifies the number of valid, out of order LB.

type=int
access=read-only

mepLbrOut

Specifies the number of loopback replies transmitted.

type=int
access=read-only

mepTransmitLbmDataTlv

Specifies the size of the loopback message.

type=int
access=read-only
Displayed(tab/group)=Data Size (/MEP Transmit LBM Information)

mepTransmitLbmDestMacAddress

Specifies the destination MAC address for the LB.

DEPRECATED: 7.0R4 - OBSOLETE: Use AbstractCfmDiagnostic.mepTargetMacAddr instead
type=MacAddress
access=read-only

mepTransmitLbmMessages

Specifies the number of loopback messages to be transmitted.

type=int
access=read-only
Displayed(tab/group)=Number of Test Packets (/MEP Transmit LBM Information)

mepTransmitLbmResultOK

Specifies LBM result

type=boolean
access=read-only

mepTransmitLbmStatus

Specifies whether the loopback is currently transmitting.

type=boolean
access=read-only

mepTransmitLbmTargetIsMepId

Specifies if the target is a MEP ID.

type=boolean
access=read-only

mepTransmitLbmVlanDropEnable

Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame

type=boolean
access=read-only
Displayed(tab/group)=VLAN Drop Enable (/MEP Transmit LBM Information)

mepTransmitLbmVlanPriority

Specifies the priority of the loopback message.

type=int
access=read-only
Displayed(tab/group)=VLAN Priority (/MEP Transmit LBM Information)

multicast

Set to true for CFM Loopback multicast tests.

type=boolean
access=read-only
Displayed(tab/group)=Multicast (/MEP Transmit Information)

packetSize

Specifies the size of the OAM Echo message. This parameter is optional and is valid only if tmnxOamPingCtlTestMode has a value of 'sdpPing', 'macPing', 'lspPing', 'vprnPing', 'mfibPing', 'vccvPing', 'icmpPing', 'p2mpLspPing', 'ethCfmLoopback' or 'ethCfmTwoWaySlm'. The minimum, maximum, and default values for the tmnxOamPingCtlTestMode cases are: 'ethCfmLoopback' : 0, 1500, 0 'ethCfmTwoWaySlm': 0, 1500, 0

type=int
access=read-only
Displayed(tab/group)=Size (Test Parameters/Execution Details)

testInterval

Specifies the interval for this test.

type=int
access=read-only
Displayed(tab/group)=Test Interval (Test Parameters/Execution Details)

trapGenerationPolicy

Specifies when the node sends traps while executing the test.

type=sas.PingTrapGenerationPolicy
access=read-only
Displayed(tab/group)=Trap Generation (Results Configuration)

Overridden Properties
id	The identifier for the STM test.

Overridden Properties

The identifier for the STM test.

Properties inherited from ethernetoam.ArchivedAbstractCfmDiagnostic
id, maintenanceAssociationId, maintenanceDomainId, mepId, mepTargetMacAddr, originatingMep, originatingNode, serviceId, serviceType, siteId, targetMep, toNodeId

Properties inherited from ethernetoam.ArchivedAbstractCfmDiagnostic

id, maintenanceAssociationId, maintenanceDomainId, mepId, mepTargetMacAddr, originatingMep, originatingNode, serviceId, serviceType, siteId, targetMep, toNodeId

Properties inherited from ethernetoam.ArchivedAbstractCfmTest
globalMA, id

Properties inherited from ethernetoam.ArchivedAbstractCfmTest

globalMA, id

Properties inherited from sas.ArchivedPseudoTest
assurance, fcQueue, forwardingClass, id, maxHistoryRows, packetFailureThreshold, packetInterval, packetTimeout, packetsToSend, profile, testFailureThreshold

Properties inherited from sas.ArchivedPseudoTest

assurance, fcQueue, forwardingClass, id, maxHistoryRows, packetFailureThreshold, packetInterval, packetTimeout, packetsToSend, profile, testFailureThreshold

Properties inherited from sas.ArchivedTest
accountingFiles, accountingPolicyObjectPointer, continuousExec, ethernetSwitchCardId, fromNodeId, nePersistent, neSchedulable, neTestIndex, neTestOwner, nmUser, originatingTest, ownerType, testResultStorage, testSuite, testSuiteId, testSuiteTestedEntity, testType, testedObject

Properties inherited from sas.ArchivedTest

accountingFiles, accountingPolicyObjectPointer, continuousExec, ethernetSwitchCardId, fromNodeId, nePersistent, neSchedulable, neTestIndex, neTestOwner, nmUser, originatingTest, ownerType, testResultStorage, testSuite, testSuiteId, testSuiteTestedEntity, testType, testedObject

Properties inherited from sas.AbstractTest
administrativeState, description, displayedName, failures, globalId, id, lastRunResult, runs, weight

Properties inherited from sas.AbstractTest

administrativeState, description, displayedName, failures, globalId, id, lastRunResult, runs, weight

Properties inherited from ManagedObject
actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed

Properties inherited from ManagedObject

actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed

Methods inherited from sas.AbstractTest
execute, stop

Methods inherited from sas.AbstractTest

execute, stop

ethernetoam ArchivedCfmLoopback

ethernetoam
ArchivedCfmLoopback