ethernetoam
ArchivedCfmLinkTrace

Archived test. Defines the 802.1ag link trace. Each link trace is originated from a MEP and is sent to the destination MAC address of another MEP.



public class ArchivedCfmLinkTrace

Properties
maxFailures The value of this property indicates the maximum number of consecutive timeouts allowed before terminating the Trace Route request.

A value of either 255 (maximum hop count/possible TTL value) or a 0 indicates that the function of terminating Trace Route request when a specific number of successive timeouts are detected is disabled.

type=int
access=read-only
Displayed(tab/group)=Maximum Failures (Results Configuration)

maxTimeToLive Specifies the maximum time-to-live value.

type=int
access=read-only
Displayed(tab/group)=TTL (Test Parameters/Test Packets)

mepLinkTraceIngressMacAddress Specifies the Ingress MAC Address of linktrace replies.

type=MacAddress
access=read-only

mepLinkTraceReceiveOrder Specifies the counter to retrieve linktrace replies.

type=long
access=read-only

mepLinkTraceSeqNumber Specifies the MEP Sequence number for linktrace results.

type=int
access=read-only

mepLinkTraceTerminalMep Specifies if the MEP received all linktrace replies.

type=boolean
access=read-only

mepTransmitLtmFlags Bits - set value to useFDBonly - this actually issues command.

type=ethernetoam.LtmFlagBitType
access=read-only

mepTransmitLtmSeqNumber Specifies the sequence number used linktrace test.

type=int
access=read-only

mepTransmitLtmTargetIsMepId Specifies if the target is a MEP ID.

type=boolean
access=read-only

mepTransmitLtmTargetMacAddress Specifies the target MAC address for the test.

DEPRECATED: 7.0R4 - OBSOLETE: Use AbstractCfmDiagnostic.mepTargetMacAddr instead
type=MacAddress
access=read-only

mepTransmitLtmTtl Specifies the TTL value used linktrace test.

type=int
access=read-only
Displayed(tab/group)=TTL (/MEP Transmit LTM Information)

trapGenerationPolicy Specifies the notification(s) to send for a test run. Each bit enables the transmission of one notification, as follows. 'probeFailure(0)': send one tmnxOamPingProbeFailedV3 notification if at least M successive probes failed during the test run. M is configured using tmnxOamPingCtlTrapProbeFailureFilter. 'testFailure(1)': send one tmnxOamPingTestFailedV3 notification if at least N probes failed during the test run. N is configured using tmnxOamPingCtlTrapTestFailureFilter. 'testCompletion(2)': send one tmnxOamPingTestCompletedV3 notification when the test run is complete.

type=sas.TraceTrapGenerationPolicy
access=read-only
Displayed(tab/group)=Trap Generation (Results Configuration)

 
Overridden Properties
id The identifier for the STM test.

 
Properties inherited from ethernetoam.ArchivedAbstractCfmDiagnostic
id, maintenanceAssociationId, maintenanceDomainId, mepId, mepTargetMacAddr, originatingMep, originatingNode, serviceId, serviceType, siteId, targetMep, toNodeId
 
Properties inherited from ethernetoam.ArchivedAbstractCfmTest
globalMA, id
 
Properties inherited from sas.ArchivedPseudoTest
assurance, fcQueue, forwardingClass, id, maxHistoryRows, packetFailureThreshold, packetInterval, packetTimeout, packetsToSend, profile, testFailureThreshold
 
Properties inherited from sas.ArchivedTest
accountingFiles, accountingPolicyObjectPointer, continuousExec, ethernetSwitchCardId, fromNodeId, nePersistent, neSchedulable, neTestIndex, neTestOwner, nmUser, originatingTest, ownerType, testResultStorage, testSuite, testSuiteId, testSuiteTestedEntity, testType, testedObject
 
Properties inherited from sas.AbstractTest
administrativeState, description, displayedName, failures, globalId, id, lastRunResult, runs, weight
 
Properties inherited from ManagedObject
actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed
 
Methods inherited from sas.AbstractTest
execute, stop