| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| bfrId |
The value of bfrId specifies the start of a contiguous range of
Bit-Forwarding Router (BFR) identifiers to be ping.
Each bfrId in the range must be a member of the tested sub-domain
(as configured using bierSubDomain). Otherwise, the test will fail.
Zero indicates no start for the bfrId range has been configured.
There are three methods to configure the destination(s) to be ping
1. bfrId.
2. bfrIdStart, bfrIdEnd.
3. bfrPrefixAddrType, bfrPrefixAddress.
Exactly one of the methods must be used. Otherwise, the test will fail.
type=int access=read-only default=0 |
| bfrIdEnd |
The value of bfrIdEnd specifies the start of a contiguous range of
Bit-Forwarding Router (BFR)
identifiers to be ping. bfrIdStart specifies the start of the range.
Each bfrId in the range must be a member of the tested sub-domain (as
configured using bierSubDomain).
Otherwise, the test will fail.
Zero indicates no start for the BFR-ID range has been configured.
There are three methods to configure the destination(s) to be pinged
1. bfrId.
2. bfrIdStart, bfrIdEnd.
3. bfrPrefixAddrType, bfrPrefixAddress.
Exactly one of the methods must be used. Otherwise, the test will fail.
type=int access=read-only default=0 |
| bfrIdStart |
The value of bfrIdStart specifies the start of a contiguous range
of Bit-Forwarding Router (BFR) identifiers to be ping. bfrIdEnd specifies
the end of the range. Each bfrId in the range must be a member of the
tested sub-domain (as configured using bierSubDomain).
Otherwise, the test will fail.
Zero indicates no start for the bfrIdrange has been configured.
There are three methods to configure the destination(s) to be ping
1. bfrId.
2. bfrIdStart, bfrIdEnd.
3. bfrPrefixAddrType, bfrPrefixAddress.
Exactly one of the methods must be used. Otherwise, the test will fail.
type=int access=read-only default=0 |
| bierSubDomain |
The value of tmnxOamBierPingCtlSubDomain specifies the BIER
sub-domain to be tested.
Zero indicates the default sub-domain.
type=int access=read-only default=0 Displayed(tab/group)=Sub-Domain ID (/BFR-ID), Sub-Domain ID (/BFR ID Range), Sub-Domain ID (/BFR Prefix) |
| bierTestTargetType |
Specifies the target type of the BIER Ping Test. The
target may either be an bfr id, bfr range , or a
bfr prefix.
A target of bfrId signifies that the targeted test will run against a specific BFR Id. A target of bfrRange signifies that the targeted test will run against the specified BFR Range in an BIER Template. The bfrRange parameter is mandatory when type is bfrRange. A target of router requires the bfrPrefixesto be configured. The targeted test will run on a router and attempt an BIER ping to a destination router(s) specified in the bierPrefixes. type=bier.BIERPingTargetTypeaccess=read-only default=bfrId Displayed(tab/group)=BIER Target Type |
| forwardingClass |
Specifies the forwarding class the BIER ping will use.
type=qos.FcEnum access=read-only default=be Displayed(tab/group)=Forwarding Class (Test Parameters/Execution Details) |
| profile |
Specifies the profile value to be used with the
forwarding class specified in forwardingClass.
type=qos.Profile access=read-only default=out Displayed(tab/group)=Forwarding Profile (Test Parameters/Execution Details) |
| testTargetType |
type=sas.TestTarget access=read-only default=srIsis Displayed(tab/group)=Target Type |
| timeToLive |
Specifies the MPLS Time To Live (TTL) to be used for the test.
type=int access=read-only default=255 Displayed(tab/group)=Time To Live (Test Parameters/Execution Details) |
| Overridden Properties | |
|---|---|
| id | The identifier for the STM test. |
| Properties inherited from sas.DeployedPing |
|---|
| assurance, id, maxHistoryRows, packetFailureThreshold, packetInterval, packetSize, packetTimeout, packetsToSend, testFailureThreshold, trapGenerationPolicy |
| Properties inherited from sas.AbstractTest |
|---|
| administrativeState, description, displayedName, failures, globalId, id, lastRunResult, runs, weight |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Methods inherited from sas.AbstractTest |
|---|
| execute, stop |