| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| bfrId |
The value of bfrId specifies the start of a contiguous range of
Bit-Forwarding Router (BFR) identifiers to be ping.
Each bfrId in the range must be a member of the tested sub-domain
(as configured using bierSubDomain). Otherwise, the test will fail.
Zero indicates no start for the bfrId range has been configured.
There are three methods to configure the destination(s) to be ping
1. bfrId.
2. bfrIdStart, bfrIdEnd.
3. bfrPrefixAddrType, bfrPrefixAddress.
Exactly one of the methods must be used. Otherwise, the test will fail.
type=int access=read-only |
| bfrIdEnd |
The value of bfrIdEnd specifies the start of a contiguous range of
Bit-Forwarding Router (BFR)
identifiers to be ping. bfrIdStart specifies the start of the range.
Each bfrId in the range must be a member of the tested sub-domain (as
configured using bierSubDomain).
Otherwise, the test will fail.
Zero indicates no start for the BFR-ID range has been configured.
There are three methods to configure the destination(s) to be pinged
1. bfrId.
2. bfrIdStart, bfrIdEnd.
3. bfrPrefixAddrType, bfrPrefixAddress.
Exactly one of the methods must be used. Otherwise, the test will fail.
type=int access=read-only |
| bfrIdEndPointer |
Pointer to the instance of BIER Sub Domain object.
type=Pointer access=read-only Displayed(tab/group)=BFR ID End (/BFR ID Range) |
| bfrIdPointer |
Pointer to the instance of BIER Sub Domain object.
type=Pointer access=read-only Displayed(tab/group)=BFR-ID (/BFR-ID) |
| bfrIdStart |
The value of bfrIdStart specifies the start of a contiguous range
of Bit-Forwarding Router (BFR) identifiers to be ping. bfrIdEnd specifies
the end of the range. Each bfrId in the range must be a member of the
tested sub-domain (as configured using bierSubDomain).
Otherwise, the test will fail.
Zero indicates no start for the bfrIdrange has been configured.
There are three methods to configure the destination(s) to be ping
1. bfrId.
2. bfrIdStart, bfrIdEnd.
3. bfrPrefixAddrType, bfrPrefixAddress.
Exactly one of the methods must be used. Otherwise, the test will fail.
type=int access=read-only |
| bfrIdStartPointer |
Pointer to the instance of BIER Sub Domain object.
type=Pointer access=read-only Displayed(tab/group)=BFR ID Start (/BFR ID Range) |
| bierSitePointer |
Pointer to the instance of BIER Router in object.
type=Pointer access=read-only Displayed(tab/group)= BIER Site (/Site) |
| bierSubDomain |
The value of tmnxOamBierPingCtlSubDomain specifies the BIER
sub-domain to be tested.
Zero indicates the default sub-domain.
type=int access=read-only Displayed(tab/group)=Sub-Domain ID (/BFR-ID), Sub-Domain ID (/BFR ID Range), Sub-Domain ID (/BFR Prefix) |
| bierTestTargetType |
Specifies the target type of the BIER Ping Test. The
target may either be an bfr id, bfr range , or a
bfr prefix.
A target of bfrId signifies that the targeted test will run against a specific BFR Id. A target of bfrRange signifies that the targeted test will run against the specified BFR Range in an BIER Template. The bfrRange parameter is mandatory when type is bfrRange. A target of router requires the bfrPrefixesto be configured. The targeted test will run on a router and attempt an BIER ping to a destination router(s) specified in the bierPrefixes. type=bier.BIERPingTargetTypeaccess=read-only Displayed(tab/group)=BIER Target Type |
| forwardingClass |
Specifies the forwarding class the BIER ping will use.
type=qos.FcEnum access=read-only Displayed(tab/group)=Forwarding Class (Test Parameters/Execution Details) |
| profile |
Specifies the profile value to be used with the
forwarding class specified in forwardingClass.
type=qos.Profile access=read-only Displayed(tab/group)=Forwarding Profile (Test Parameters/Execution Details) |
| routerId |
A number used to identify a virtual router instance in the system
type=int access=read-only |
| testTargetType |
type=sas.TestTarget access=read-only Displayed(tab/group)=Target Type |
| timeToLive |
Specifies the MPLS Time To Live (TTL) to be used for the test.
type=int access=read-only Displayed(tab/group)=Time To Live (Test Parameters/Execution Details) |
| Overridden Properties | |
|---|---|
| id | The identifier for the STM test. |
| Properties inherited from sas.ArchivedPing |
|---|
| assurance, id, maxHistoryRows, packetFailureThreshold, packetInterval, packetSize, packetTimeout, packetsToSend, testFailureThreshold, trapGenerationPolicy |
| Properties inherited from sas.AbstractTest |
|---|
| administrativeState, description, displayedName, failures, globalId, id, lastRunResult, runs, weight |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Methods inherited from sas.AbstractTest |
|---|
| execute, stop |