Overview Package Class Deprecated Help

aossas
CPETestHeadProfile

This class is used to configure Test parameters for CPE Test.

public class CPETestHeadProfile

Properties
cVlanTag The customer vlan for the packet.

type=int
default=100
minimum=1
maximum=4094
Displayed(tab/group)=VLAN-Tag (/Frame Configuration)
configureL2Saa L2 SAA Configuration .

type=generic.TruthValue
default=false
Displayed(tab/group)=Configure L2 Saa
dataPattern The data pattern present in the generated test frame.

type=int
default=0
minimum=0
maximum=65535
Displayed(tab/group)=Pattern (/Frame Configuration)
dropEligible Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame.

type=generic.TruthValue
default=false
Displayed(tab/group)=L2-SAA Drop Eligible (/L2-SAA Configuration)
dropEnable Specifies the CFI bit present in the generated test frame.

type=boolean
default=false
Displayed(tab/group)=Drop Enable (/Frame Configuration)
dstIpAddress Specifies the destination IP of the generated test frame.

type=InetAddress
default=0.0.0.0
Displayed(tab/group)=Destination IP (/IP Frame)
dstIpAddressType Specifies the address type of the dstIpAddress.

type=rtr.InetAddressType
default=ipv4
dstPort Specifies the destination port of the generated test frame.

type=int
default=33024
minimum=0
maximum=65535
Displayed(tab/group)=Destination Port (/IP Frame)
etherType Specifies the ether-type for the L2 packet.

type=int
default=1536
minimum=1536
maximum=65534
Displayed(tab/group)=Ether Type (/Ether Frame)
frameDstMacAddress The destination mac-address of the test frame.

type=MacAddress
default=00-00-00-00-00-00
Displayed(tab/group)=Destination MAC
frameProtocol Specifies the information about the packet. Whether it is for TCP or UDP socket.

type=aossas.TestFrameProtocol
default=reserve
Displayed(tab/group)=Protocol (/IP Frame)
frameSize The size of packets in bytes.

type=int
default=64
minimum=64
maximum=9212
units=bytes
Displayed(tab/group)=Frame Size
frameSrcMacAddress The source mac-address of the test frame.

type=MacAddress
default=00-00-00-00-00-00
Displayed(tab/group)=Source MAC
frameTos Indicates the Type of Service for the generated test frame.

type=int
default=0
minimum=0
maximum=255
Displayed(tab/group)=TOS (/IP Frame)
frameTtl Indicates the Time to Live of the generated test frame.

type=int
default=0
minimum=0
maximum=255
Displayed(tab/group)=TTL (/IP Frame)
frameType The type of frame.

type=aossas.TestFrameType
default=none
Displayed(tab/group)=Frame Type
interPktDelay Specifies the delay between two consecutive packets transmitted during a MAC-Ping iteration.The value specified should be a multiple of 100.

type=int
default=1000
minimum=100
maximum=1000
units=milliseconds
Displayed(tab/group)=L2-SAA Interval (/L2-SAA Configuration)
numPkts Specifies the number of packets to be sent in one MAC-Ping iteration.

type=int
default=5
minimum=1
maximum=10
Displayed(tab/group)=L2-SAA Count (/L2-SAA Configuration)
payloadSize Specifies the size of the MAC-Ping payload to be used for the MAC-Ping operation.

type=int
default=36
minimum=32
maximum=1500
units=bytes
Displayed(tab/group)=L2-SAA Payload Size (/L2-SAA Configuration)
priority Specifies the priority in the generated test frame.

type=int
default=7
minimum=0
maximum=7
Displayed(tab/group)=Priority (/Frame Configuration)
remoteStatsFetchProfile Indicates if the result should be collected from Generator / Analyzer.

type=aossas.RemoteFetch
default=unset
remoteSysMac Indicates if the result should be collected from Generator / Analyzer.

type=MacAddress
default=00-00-00-00-00-00
Displayed(tab/group)=Remote System MAC
srcIpAddress Specifies the source IP of the generated test frame.

type=InetAddress
default=0.0.0.0
Displayed(tab/group)=Source IP (/IP Frame)
srcIpAddressType Specifies the address type of the sourceIpAddress.

type=rtr.InetAddressType
default=ipv4
srcPort Specifies the source port of the generated test frame.

type=int
default=33024
minimum=0
maximum=65535
Displayed(tab/group)=Source Port (/IP Frame)
testDUTDirection Test Direction unidirectional/bidirectional.

type=aossas.TestDirection
default=unidirectional
Displayed(tab/group)=Direction
testDUTRole The role of the DUT based on the direction

type=aossas.DUTRole
default=none
Displayed(tab/group)=Role
testDstEndpoint To identify the remote DUT. For unidirectional, this identifies the analyzer DUT. For bidirectional test, this identifies the DUT that needs to activate the loopback function.

type=string
default=DEFAULT
minimum=1
maximum=32
Displayed(tab/group)=Destination Endpoint
testDuration The duration of the test for which traffic generator shall be active.

type=int
default=5
minimum=5
maximum=3600
units=seconds
testSrcEndpoint To identify the local or transmitting DUT. For bidirectional test, this also identifies the analyzer DUT.

type=string
default=DEFAULT
minimum=1
maximum=32
Displayed(tab/group)=Source Endpoint
testState Indicates whether to start or stop the OAM test.

type=aossas.TestState
default=stop
testStatus The Test status.

type=aossas.TestStatus
access=read-only
default=notstarted
Displayed(tab/group)=Status
txRate The rate at which traffic generator shall generate the traffic. The Value specified should be a multiple of 8

type=int
default=8
minimum=8
maximum=1000000
units=kbps
Displayed(tab/group)=Tx Rate
vlanPort The port to be used in the testing.Depending on the role this port shall have different interpretation. Generator port generating the frame. Loopback - This port shall be the port where Loopback of the traffic shall take place. Analyzer - Port configuration is not required.

type=Pointer
default=
Displayed(tab/group)=vlanPort (/VLAN)
vlanPriority Specifies both the internal priority of the Mac ping and the 802.1p value on the vlan tag header. Default is 0.

type=int
default=0
minimum=0
maximum=7
Displayed(tab/group)=L2-SAA Vlan Priority (/L2-SAA Configuration)
vlanSitePointer The vlan required for traffic analysis and test frame accounting.

type=Pointer
default=
Displayed(tab/group)=vlanSitePointer (/VLAN)
 
Overridden Properties
description A label given to uniquely identify this Policy. Must be at least one character long.

default=DEFAULT
minimum=1
maximum=32
displayedName A label given to uniquely identify this Policy. Must be at least one character long.

access=read-create
minimum=1
maximum=32
 
Properties inherited from policy.PolicyDefinition
configurationAction, configurationMode, discoveryState, displayedName, distributionMode, isMaster, lastSyncTime, numberOfUnderlyingPolicyItems, origin, policyMode, policySyncGroupPointer, policyType
 
Properties inherited from policy.PolicyObject
description, displayedName, globalPolicy, id, isLocal, policyType, siteId, siteName, templateObject
 
Properties inherited from ManagedObject
actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed
 
Methods inherited from policy.PolicyDefinition
distribute, distributeUsingGroups, distributeV2, evaluatePolicy, findGlobal, findLocal, findReleased, getSyncTaskResult, resetToReleasedPolicy, setConfigurationModeToDraft, setConfigurationModeToReleased, setDistributionModeToLocalEditOnly, setDistributionModeToSyncWithGlobal, syncTo, syncToLocalWithResync
 
Supported Network Elements
OS6250
OS6450
OS6850/6850E Supported from 6.4.5
OS6855 Supported from 6.4.5
OS9700E/9800E Supported from 6.4.5
OS6400 Supported from 6.4.5
OS6465 Supported from 8.6.1
Product Specifics
OS6250 6.6.3
OS6400 6.4.5
OS6850/6850E 6.4.5
OS6850/6850E 6.4.6
OS6855 6.4.5
OS6855 6.4.6
OS9700E/9800E 6.4.5
OS9700E/9800E 6.4.6