| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| aaRadiusAccPlcy |
It specifies the RADIUS accounting policy used to initiate dynamic transit subscriber creation.
type=Pointer default= Displayed(tab/group)=AA RADIUS Accounting Policy (/RADIUS) |
| aapolicy.TransitSub-Set |
type=Children-Set |
| autoCreate |
It specifies whether transit subscribers are automatically created for each IP address without
a policy server. Auto creation is only possible when a default application profile has been defined.
The use of auto creation of transit subscribers is mutually exclusive with the use of
DHCP or RADIUS for this purpose.
type=generic.EnabledDisabled default=disabled Displayed(tab/group)=Auto Create |
| autoInactivity |
It specifies whether transit subscribers will be monitored for inactivity.
When Seen IP, Auto Create and Auto Inactivity are set, auto-created transit
subscribers will be monitored for inactivity and inactive subscribers will be removed.
To change this setting Auto Create must be disabled.
type=generic.EnabledDisabled default=disabled Displayed(tab/group)=Auto Inactivity Monitor |
| defAppProfile |
It specifies the name of the default application profile
to be applied to a dynamically learned AA transit subscriber.
type=Pointer default= Displayed(tab/group)=Default Application Profile |
| dhcp |
It specifies whether transit subscribers are dynamically learned via DHCP.
type=generic.EnabledDisabled default=disabled Displayed(tab/group)=DHCP |
| diameter |
The value of diameter specifies whether transit subscribers are dynamically learned via Diameter.
When seenIp and diameter are both enabled, a diameter session with the policy server will be
created for each Seen IP address (IPCAN session). Upon successful session creation,
a transit subscriber will be dynamically created with the PCC (Policy and Charging Control)
rules from the policy server.
The use of Diameter to learn transit subscribers is mutually exclusive with the use of DHCP,
Auto Create, and RADIUS for this purpose.
type=generic.EnabledDisabled default=disabled Displayed(tab/group)=Diameter (/Diameter) |
| diameterAppPolicy |
It specifies the Diameter application policy to be used.
The application policy must have the application set to value gx.
type=Pointer default= Displayed(tab/group)=Diameter Application Policy (/Diameter) |
| ipv6AddrPrefixLength |
Specifies the prefix length of IPv6 addresses in this policy for both static and dynamic transits.
It can only be changed while RADIUS is disabled and no static IPv6 subscribers exist.
type=int default=0 minimum=0 maximum=64 Displayed(tab/group)=IPv6 Address Prefix Length |
| radius |
It specifies whether transit subscribers are dynamically learned via RADIUS.
type=generic.EnabledDisabled default=disabled Displayed(tab/group)=RADIUS (/RADIUS) |
| radiusAuthPlcy |
It specifies the RADIUS authentication policy to be used.
type=Pointer default= Displayed(tab/group)=Subscriber Authentication Policy (/RADIUS) |
| seenIp |
It specifies whether or not to initiate dynamic transit subscriber creation when traffic is
detected on a parent SAP or Spoke SDP.
When seenIp and RADIUS are both enabled a RADIUS Access Request message is sent to the RADIUS server.
The RADIUS server must respond with a transit subscriber create message.
When seenIp and autoCreate are both enabled a transit subscriber will be dynamically created
for each IP address without a policy server.
The use of Seen IP to learn transit subscribers is mutually exclusive with the use of DHCP
for this purpose.
type=generic.EnabledDisabled default=disabled Displayed(tab/group)=Seen IP |
| subIdPlcy |
It specifies the subscriber identification policy for this transit IP policy.
type=Pointer default= Displayed(tab/group)=Subscriber Identification Policy |
| Properties inherited from aapolicy.AbstractTransitPolicy |
|---|
| description, groupId, grpPartId, id, partitionId |
| Properties inherited from policy.PolicyObject |
|---|
| description, displayedName, globalPolicy, id, isLocal, policyType, siteId, siteName, templateObject |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| 7750 SR |
Supported from 10.0.R1 until 13.0.R8
|
| 7450 ESS |
Supported for all versions
|