Authentication

• Single step authentication

Inventory Retrieval

1. Discover the physical and logical topology from WS-NOC
2. Retrieve the client ports that are part of Service and RX power is Null
3. Retrieve the client ports that are not part of Service and RX power is Null
4. Retrieve the client ports that are unassigned (port not assigned as 1GE, 10GE, STM64, and so on)
5. Retrieve Object Life Cycle (OLC) state of the Objects
6. Retrieve service with major and critical alarms
7. Retrieve Network discovery data for particular NAD
8. Retrieve LLDP information for OTN and ESM cards

Provisioning a Service - Unprotected

a. Managed Plane with Auto-Routing

1. Two-Ended Service Creation

b. Control Plane

1. Create an L0 ASON connection
2. Create an L1 ASON connection
3. Create an ASON MRN connection
4. Three-Ended Service Creation
5. Four-Ended Service Creation

c. Delete a Connection

1. Delete an Infrastructure Connection or Service

d. Filters on Services

1. Filter Services using listPathsByFilters

e. Alien Channel

1. Configure Alien Channels/OCH Services with Profiles
2. Configure Alien Wavelength Bank Services
   

f. Connection Creation with Mandatory Parameters

1. 10Gbe service creation
2. 100 Gbe service creation

Provisioning a Service - Protected

a. Managed Plane

1. SNCP Protection
2. OPSB Protection
3. Y-Cable Protection
4. OPSA Protection
5. OMSP Protection
6. OLP Protection
7. Three-Ended Service Creation
8. Four-Ended Service Creation

b. Control Plane

1. Three-Ended Service Creation
2. Four-Ended Service Creation
3. SNCP Protection
4. OPSB Protection
5. Y-Cable Protection
6. OPSA Protection

Connection Modification

a. Managed Plane Connections

1. Modify Utilization Profile
   
2. Modify Connection and Customer name
   
3. Modify Transmission Parameters (TP)
4. Re-route Connection
   
5. Add and Remove Protection
   
6. OTN latency

• Set OTN latency
• Retrieve OTN latency

b. L0 Control Plane Connections

1. Switch to Nominal route
   
2. Modify SNC attributes
   
3. Convert Current to Nominal route
   
4. Re-route Connection
   
5. Switch to Backup route
   

c. L1 Control Plane Connections

1. Modify SNC attributes
2. Re-route Connection
3. Convert Current to Nominal route
4. Switch to Nominal route
5. Switch to Backup route
6. Add and Remove Protection

d. MRN Connections

1. Modify Transmission Parameters
   
2. Modify Connection Name
   
3. Re-route the Service
   
4. Add and Remove Protection

e. Service State Modification

1. Modify service state as in-service or out of service

f. Modify Connection Based on User Required Parameter

1. Modify the connection parameters

g. Associate/Unassociate TCA Profile for a Connection

1. Associate/Unassociate TCA Profile

Node Management

a. Add a Node/NE

1. Simplified
   
2. Advanced
   

b. Discover Node/NE

1. Ping sweep
   
2. Trap based
   

c. Modify a Node/NE

1. Modify a Node or NE

d. Delete a Node/NE

1. Delete a Node or NE

e. Retrieve NE Details Using OTN NE ID for Correlation

1. Retrieve NE Details Using OTN NE ID

f. Retrieve the Communication Interface

1. Retrieve the Communication Interface

Network Profiles

a. Alarm Profiles

1. Manage ASAP operations

Ethernet Service Management

a. NPA/Tunnel/LAG/MCLAG operations for MPLS-TP Services

1. Manage NPA operations
2. Manage Tunnel operations
3. Manage LAG operations
4. Manage MCLAG operations

b. Service operations for MPLS-TP Services

1. Deploy EVPL Service
2. Manage Service operations

c. Packet Switch operations in ESM

1. Manage Packet Switch operations

d. LAG/MCLAG operations for Provider Bridge Services

1. Manage LAG operations
2. Manage MCLAG operations

e. ERP operations for Provider Bridge Services

1. Manage ERP operations

f. Service operations for Provider Bridge Services

1. Deploy EVPL Service
2. Manage Service operations

g. OAM operations in ESM

1. Manage Test Suite and Test Case operations
2. Retrieve Test Suites and Test Cases

h. QoS operations in ESM

1. Manage QoS policies

i. LLDP snooping on the 11OPE8 card

1. Manage LLDP snooping

j. ERP Topology and RPL Details

1. ERP Topology and RPL Details

ESM Management of 1830 TPS

Note: 1830 TPS use cases are not supported in release 21.4

a. Template operations

1. Create, Modify, and Delete Templates

b. LAG operations

1. LAG operations on 1830 TPS NE

c. ERP operations

1. ERP operations on 1830 TPS NE

d. Service operations

1. Deploy EPL Service
2. Deploy EVPLAN Service
3. Service operations on 1830 TPS NE
4. eCPRI Service operations on 1830 TPS NE

e. OAM Test Suites and Test Cases

1. Create On-Demand DM Test Suite and Test Case
2. Create On-Demand SLM Test Suite and Test Case
3. Create Loopback Test Suite and Test Case
4. Create Link Path Trace Test Suite and Test Case
5. Retrieve Test Suites and Test Cases

f. QoS Policy

1. Create Access Egress QoS Policy
2. Create Port Scheduler Policy
3. Create Network QoS Policy
4. Create Network Queue QoS Policy

g. Health Check validation for Services

1. Health Check for EPL/EVPL Services
2. Health Check for eCPRI Service
3. Retrieve Test Suites and Test Cases

h. PM Report

1. Configure and retrieve PM data

i. EML operations

1. Perform EML operations for 1830 TPS Node

Alarms and Kafka

a. Fault Management Kafka Notification Service

1. Manage subscriptions
2. Create subscription for Root Cause Alarms

b. Fault Management

1. Retrieve current alarms
2. Retrieve historical alarm
   
3. Register for filtered alarms
4. Retrieve historical alarms in the network

c. Performance Management Kafka Notification Service

1. Manage PM Kafka subscriptions
   

d. Alarm Access For particular NAD

1. NAD compliant Alarm APIs
   

e. SNMP-AH Equivalent Kafka Notifications

1. Alarm Subscription
2. Alarm Filtering

f. Network NBI Kafka Notification

1. NBI Kafka Notification

g. Filters for Alarm Retrieval through Kafka

1. Configure Property and Advanced Filters for Alarm Retrieval through Kafka

System Administration

a. HA State of System

1. Active or standby state
2. System replication is ON/OFF
3. FastHA is installed or Standard HA

b. WS-NOC Memory and CPU utilization

1. Check WS-NOC Memory and CPU utilization

c. NAD Management

1. Configure User
2. Configure NAD

d. License usage and expiry date

1. Check the license usage and expiry date

e. Retrieve Container Information

1. Retrieve the details for the list of containers on the node (VM)

f. Monitor Health Status of WS-NOC

1. Monitor Health Status of WS-NOC

NE Software Management

1. Check when the last NE backup was taken
2. Check the last NE software upgrade status
3. Check EC card redundancy
4. Check if LOS propagation is enabled on interface
5. Check MIB backup status
6. Check number of MIB backup files

Reports

a. OTDR

1. Schedule Baseline OTDR scan
2. Schedule Troubleshoot OTDR scan
3. Schedule Global Baseline scan
4. Retrieve OTDR scan result
5. Retrieve OTDR scan history
6. Retrieve OTDR scan file
7. OTDR Scan now
8. OTDR scan for dark fibre
   

b. Wavelength Usage

1. Retrieve wavelength usage report

c. Global Inventory Report

1. Fetch inventory data

d. PM Report

1.Retrieve Live PM

2. On Demand Report

3. Enable PM data

4. Disable PM data

5. Modify PM data

6. Clear PM Bin for Connections

7. Clear PM Bin TP level - PM Enabled point

e. Network Report

1. Network Reports

Reports

a. OTDR

1. Schedule Baseline OTDR scan
2. Schedule Troubleshoot OTDR scan
3. Schedule Global Baseline scan
4. Retrieve OTDR scan result
5. Retrieve OTDR scan history
6. Retrieve OTDR scan file
7. OTDR Scan now
8. OTDR scan for dark fibre

b. Wavelength Usage

1. Retrieve wavelength usage report

c. Global Inventory Report

1. Fetch inventory data

d. PM Report

1. Retrieve Live PM
2. On Demand Report
3. Enable PM data
4. Disable PM data
5. Modify PM data
6. Clear PM Bin for Connections
7. Clear PM Bin TP level - PM Enabled point

e. Network Report

1. Network Reports

Authentication

• Single step authentication

Inventory Retrieval

1. Discover the physical and logical topology from WS-NOC
2. Retrieve the client ports that are part of Service and RX power is Null
3. Retrieve the client ports that are not part of Service and RX power is Null
4. Retrieve the client ports that are unassigned (port not assigned as 1GE, 10GE, STM64, and so on)
5. Retrieve Object Life Cycle (OLC) state of the Objects
6. Retrieve service with major and critical alarms
7. Retrieve Network discovery data for particular NAD
8. Retrieve LLDP information for OTN and ESM cards

Provisioning a Service - Unprotected

a. Managed Plane with Auto-Routing

1. Two-Ended Service Creation

b. Control Plane

1. Create an L0 ASON connection
2. Create an L1 ASON connection
3. Create an ASON MRN connection
4. Three-Ended Service Creation
5. Four-Ended Service Creation

c. Delete a Connection

1. Delete an Infrastructure Connection or Service

d. Filters on Services

1. Filter Services using listPathsByFilters

e. Alien Channel

1. Configure Alien Channels/OCH Services with Profiles
2. Configure Alien Wavelength Bank Services
   

f. Connection Creation with Mandatory Parameters

1. 10Gbe service creation
2. 100 Gbe service creation

Provisioning a Service - Protected

a. Managed Plane

1. SNCP Protection
2. OPSB Protection
3. Y-Cable Protection
4. OPSA Protection
5. OMSP Protection
6. OLP Protection
7. Three-Ended Service Creation
8. Four-Ended Service Creation

b. Control Plane

1. Three-Ended Service Creation
2. Four-Ended Service Creation
3. SNCP Protection
4. OPSB Protection
5. Y-Cable Protection
6. OPSA Protection

Connection Modification

a. Managed Plane Connections

1. Modify Utilization Profile
   
2. Modify Connection and Customer name
   
3. Modify Transmission Parameters (TP)
4. Re-route Connection
   
5. Add and Remove Protection
   
6. OTN latency

• Set OTN latency
• Retrieve OTN latency
  

b. L0 Control Plane Connections

1. Switch to Nominal route
   
2. Modify SNC attributes
   
3. Convert Current to Nominal route
   
4. Re-route Connection
   
5. Switch to Backup route
   

c. L1 Control Plane Connections

1. Modify SNC attributes
2. Re-route Connection
3. Convert Current to Nominal route
4. Switch to Nominal route
5. Switch to Backup route
6. Add and Remove Protection

d. MRN Connections

1. Modify Transmission Parameters
   
2. Modify Connection Name
   
3. Re-route the Service
   
4. Add and Remove Protection

e. Service State Modification

1. Modify service state as in-service or out of service

f. Modify Connection Based on User Required Parameter

1. Modify the connection parameters

g. Associate/Unassociate TCA Profile for a Connection

1. Associate/Unassociate TCA Profile

Node Management

a. Add a Node/NE

1. Simplified
   
2. Advanced
   

b. Discover Node/NE

1. Ping sweep
   
2. Trap based
   

c. Modify a Node/NE

1. Modify a Node or NE

d. Delete a Node/NE

1. Delete a Node or NE

Network Profiles

a. Alarm Profiles

1. Manage ASAP operations

Ethernet Service Management

a. NPA/Tunnel/LAG/MCLAG operations for MPLS-TP Services

1. Manage NPA operations
2. Manage Tunnel operations
3. Manage LAG operations
4. Manage MCLAG operations

b. Service operations for MPLS-TP Services

1. Deploy EVPL Service
2. Manage Service operations

c. Packet Switch operations in ESM

1. Manage Packet Switch operations

d. LAG/MCLAG operations for Provider Bridge Services

1. Manage LAG operations
2. Manage MCLAG operations

e. ERP operations for Provider Bridge Services

1. Manage ERP operations

f. Service operations for Provider Bridge Services

1. Deploy EVPL Service
2. Manage Service operations

g. OAM operations in ESM

1. Manage Test Suite and Test Case operations
2. Retrieve Test Suites and Test Cases

h. QoS operations in ESM

1. Manage QoS policies

i. LLDP snooping on the 11OPE8 card

1. Manage LLDP snooping

ESM Management of 1830 TPS

Note: 1830 TPS use cases are not supported in release 21.4

a. Template operations

1. Create, Modify, and Delete Templates

b. LAG operations

1. LAG operations on 1830 TPS NE

c. ERP operations

1. ERP operations on 1830 TPS NE

d. Service operations

1. Deploy EPL Service
2. Deploy EVPLAN Service
3. Service operations on 1830 TPS NE
4. eCPRI Service operations on 1830 TPS NE

e. OAM Test Suites and Test Cases

1. Create On-Demand DM Test Suite and Test Case
2. Create On-Demand SLM Test Suite and Test Case
3. Create Loopback Test Suite and Test Case
4. Create Link Path Trace Test Suite and Test Case
5. Retrieve Test Suites and Test Cases

f. QoS Policy

1. Create Access Egress QoS Policy
2. Create Port Scheduler Policy
3. Create Network QoS Policy
4. Create Network Queue QoS Policy

g. Health Check validation for Services

1. Health Check for EPL/EVPL Services
2. Health Check for eCPRI Service
3. Retrieve Test Suites and Test Cases

h. PM Report

1. Configure and retrieve PM data

i. EML operations

1. Perform EML operations for 1830 TPS Node

Alarms and Kafka

a. Fault Management Kafka Notification Service

1. Manage subscriptions
2. Create subscription for Root Cause Alarms

b. Fault Management

1. Retrieve current alarms
2. Retrieve historical alarm
   
3. Register for filtered alarms
4. Retrieve historical alarms in the network

c. Performance Management Kafka Notification Service

1. Manage PM Kafka subscriptions
   

d. Alarm Access For particular NAD

1. NAD compliant Alarm APIs
   

e. SNMP-AH Equivalent Kafka Notifications

1. Alarm Subscription
2. Alarm Filtering
   

f. Network NBI Kafka Notification

NBI Kafka Notification

System Administration

a. HA State of System

1. Active or standby state
2. System replication is ON/OFF
3. FastHA is installed or Standard HA

b. WS-NOC Memory and CPU utilization

1. Check WS-NOC Memory and CPU utilization

c. NAD Management

1. Configure User
2. Configure NAD

d. License usage and expiry date

1. Check the license usage and expiry date

e. Retrieve Container Information

1. Retrieve the details for the list of containers on the node (VM)

f. Monitor Health Status of WS-NOC

1. Monitor Health Status of WS-NOC

NE Software Management

1. Check when the last NE backup was taken
2. Check the last NE software upgrade status
3. Check EC card redundancy
4. Check if LOS propagation is enabled on interface
5. Check MIB backup status
6. Check number of MIB backup files

Reports

a. OTDR

1. Schedule Baseline OTDR scan
2. Schedule Troubleshoot OTDR scan
3. Schedule Global Baseline scan
4. Retrieve OTDR scan result
5. Retrieve OTDR scan history
6. Retrieve OTDR scan file
7. OTDR Scan now
8. OTDR scan for dark fibre
   

b. Wavelength Usage

1. Retrieve wavelength usage report

c. Global Inventory Report

1. Fetch inventory data

d. PM Report

1.Retrieve Live PM

2. On Demand Report

3. Enable PM data

4. Disable PM data

5. Modify PM data

6. Clear PM Bin for Connections

7. Clear PM Bin TP level - PM Enabled point

e. Network Report

1. Network Reports

Authentication

• Single step authentication

Inventory Retrieval

1. Discover the physical and logical topology from WS-NOC
2. Retrieve the client ports that are part of Service and RX power is Null
3. Retrieve the client ports that are not part of Service and RX power is Null
4. Retrieve the client ports that are unassigned (port not assigned as 1GE, 10GE, STM64, and so on)
5. Retrieve Object Life Cycle (OLC) state of the Objects
6. Retrieve service with major and critical alarms
7. Retrieve Network discovery data for particular NAD

Provisioning a Service - Unprotected

a. Managed Plane with Auto-Routing

1. Two-Ended Service Creation

b. Control Plane

1. Create an L0 ASON connection
2. Create an L1 ASON connection
3. Create an ASON MRN connection
4. Three-Ended Service Creation
5. Four-Ended Service Creation

c. Delete a Connection

1. Delete an Infrastructure Connection or Service

d. Filters on Services

1. Filter Services using listPathsByFilters

e. Alien Channel

1. Configure Alien Channels/OCH Services with Profiles
2. Configure Alien Wavelength Bank Services
   

f. Connection Creation with Mandatory Parameters

1. 10Gbe service creation
2. 100 Gbe service creation

Provisioning a Service - Protected

a. Managed Plane

1. SNCP Protection
2. OPSB Protection
3. Y-Cable Protection
4. OPSA Protection
5. OMSP Protection
6. OLP Protection
7. Three-Ended Service Creation
8. Four-Ended Service Creation

b. Control Plane

1. Three-Ended Service Creation
2. Four-Ended Service Creation
3. SNCP Protection
4. OPSB Protection
5. Y-Cable Protection
6. OPSA Protection

Connection Modification

a. Managed Plane Connections

1. Modify Utilization Profile
   
2. Modify Connection and Customer name
   
3. Modify Transmission Parameters (TP)
4. Re-route Connection
   
5. Add and Remove Protection
   
6. OTN latency

• Set OTN latency
• Retrieve OTN latency
  

b. L0 Control Plane Connections

1. Switch to Nominal route
   
2. Modify SNC attributes
   
3. Convert Current to Nominal route
   
4. Re-route Connection
   
5. Switch to Backup route
   

c. L1 Control Plane Connections

1. Modify SNC attributes
2. Re-route Connection
3. Convert Current to Nominal route
4. Switch to Nominal route
5. Switch to Backup route
6. Add and Remove Protection

d. MRN Connections

1. Modify Transmission Parameters
   
2. Modify Connection Name
   
3. Re-route the Service
   
4. Add and Remove Protection

e. Service State Modification

1. Modify service state as in-service or out of service

f. Modify Connection Based on User Required Parameter

1. Modify the connection parameters

g. Associate/Unassociate TCA Profile for a Connection

1. Associate/Unassociate TCA Profile

Node Management

a. Add a Node/NE

1. Simplified
   
2. Advanced
   

b. Discover Node/NE

1. Ping sweep
   
2. Trap based
   

c. Modify a Node/NE

1. Modify a Node or NE

d. Delete a Node/NE

1. Delete a Node or NE

Network Profiles

a. Alarm Profiles

1. Manage ASAP operations

Ethernet Service Management

a. NPA/Tunnel/LAG/MCLAG operations for MPLS-TP Services

1. Manage NPA operations
2. Manage Tunnel operations
3. Manage LAG operations
4. Manage MCLAG operations

b. Service operations for MPLS-TP Services

1. Deploy EVPL Service
2. Manage Service operations

c. Packet Switch operations in ESM

1. Manage Packet Switch operations

d. LAG/MCLAG operations for Provider Bridge Services

1. Manage LAG operations
2. Manage MCLAG operations

e. ERP operations for Provider Bridge Services

1. Manage ERP operations

f. Service operations for Provider Bridge Services

1. Deploy EVPL Service
2. Manage Service operations

g. OAM operations in ESM

1. Manage Test Suite and Test Case operations
2. Retrieve Test Suites and Test Cases

h. QoS operations in ESM

1. Manage QoS policies

g. LLDP snooping on the 11OPE8 card

1. Manage LLDP snooping

ESM Management of 1830 TPS

Note: 1830 TPS use cases are not supported in release 21.4

a. Template operations

1. Create, Modify, and Delete Templates

b. LAG operations

1. LAG operations on 1830 TPS NE

c. ERP operations

1. ERP operations on 1830 TPS NE

d. Service operations

1. Deploy EPL Service
2. Deploy EVPLAN Service
3. Service operations on 1830 TPS NE
4. eCPRI Service operations on 1830 TPS NE

e. OAM Test Suites and Test Cases

1. Create On-Demand DM Test Suite and Test Case
2. Create On-Demand SLM Test Suite and Test Case
3. Create Loopback Test Suite and Test Case
4. Create Link Path Trace Test Suite and Test Case
5. Retrieve Test Suites and Test Cases

f. QoS Policy

1. Create Access Egress QoS Policy
2. Create Port Scheduler Policy
3. Create Network QoS Policy
4. Create Network Queue QoS Policy

g. Health Check validation for Services

1. Health Check for EPL/EVPL Services
2. Health Check for eCPRI Service
3. Retrieve Test Suites and Test Cases

h. PM Report

1. Configure and retrieve PM data

i. EML operations

1. Perform EML operations for 1830 TPS Node

Alarms and Kafka

a. Fault Management Kafka Notification Service

1. Manage subscriptions
2. Create subscription for Root Cause Alarms

b. Fault Management

1. Retrieve current alarms
2. Retrieve historical alarm
   
3. Register for filtered alarms
4. Retrieve historical alarms in the network

c. Performance Management Kafka Notification Service

1. Manage PM Kafka subscriptions
   

d. Alarm Access For particular NAD

1. NAD compliant Alarm APIs

NE Software Management

1. Check when the last NE backup was taken
2. Check the last NE software upgrade status
3. Check EC card redundancy
4. Check if LOS propagation is enabled on interface
5. Check MIB backup status
6. Check number of MIB backup files

System Administration

a. HA State of System

1. Active or standby state
2. System replication is ON/OFF
3. FastHA is installed or Standard HA

b. WS-NOC Memory and CPU utilization

1. Check WS-NOC Memory and CPU utilization

c. NAD Management

1. Configure User
2. Configure NAD

d. License usage and expiry date

1. Check the license usage and expiry date

e. Retrieve Container Information

1. Retrieve the details for the list of containers on the node (VM)

f. Monitor Health Status of WS-NOC

1. Monitor Health Status of WS-NOC

Reports

a. OTDR

1. Schedule Baseline OTDR scan
2. Schedule Troubleshoot OTDR scan
3. Schedule Global Baseline scan
4. Retrieve OTDR scan result
5. Retrieve OTDR scan history
6. Retrieve OTDR scan file
7. OTDR Scan now
8. OTDR scan for dark fibre
   

b. Wavelength Usage

1. Retrieve wavelength usage report

c. Global Inventory Report

1. Fetch inventory data

d. PM Report

1.Retrieve Live PM

2. On Demand Report

3. Enable PM data

4. Disable PM data

5. Modify PM data

6. Clear PM Bin for Connections

7. Clear PM Bin TP level - PM Enabled point

e. Network Report

1. Network Reports