| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| diffServField |
Specifies the value to store in the Differentiated
Services (DS) Field in the IP packet used to
encapsulate the Nokia 7x50 SR OAM Trace Route probe.
The DS Field is defined as the Type of Service (TOS) octet
in a IPv4 header or as the Traffic Class octet in a IPv6
header.
This property can be used to determine what effect an explicit DS Field setting has on a trace response. Not all values are legal or meaningful. DS Field usage is often not supported by IP implementations. A value of 0 means that the function represented by this option is not supported. Useful TOS octet values are probably '16' (low delay) and '8' (high throughput). type=intdefault=0 minimum=0 maximum=255 Displayed(tab/group)=DiffServ Field (Test Parameters/Test Probe) |
| forwardingClass |
Specifies the forwarding class.
type=qos.FcEnum default=be Displayed(tab/group)=Forwarding Class (Test Parameters/Test Probe) |
| initialTimeToLive |
Specifies the initial outermost label time-to-live value.
This enables bypassing the initial (often well known)
portion of a path.
type=int default=1 minimum=0 maximum=255 Displayed(tab/group)=Initial Time to Live (Test Parameters/Test Probe) |
| maxTimeToLive |
Specifies the maximum outermost label time-to-live value.
type=int default=4 minimum=1 maximum=255 Displayed(tab/group)=Maximum Time to Live (Test Parameters/Test Probe) |
| profile |
Specifies the profile value to be used with the
forwarding class specified in forwardingClass.
type=qos.Profile default=out Displayed(tab/group)=Forwarding Profile (Test Parameters/Test Probe) |
| replyViaControlPlane |
When the value of replyViaControlPlane is 'true', the
OAM trace response is returned using the control plane.
If its value is 'false', the packet is sent via the data
plane
type=boolean default=false Displayed(tab/group)=Reply Via Control Plane (Test Parameters/Test Probe) |
| serviceId |
The service ID of the VPRN site that is being tested.
type=long access=read-only |
| sourceIpAddress |
Specifies the address to be used as the source for
performing the VPRN trace test.
type=InetAddress default=0.0.0.0 Displayed(tab/group)=Source IP Address (Test Parameters/Test Probe) |
| sourceIpAddressType |
Specifies the address type of sourceIpAddress.
type=rtr.InetAddressType default=ipv4 |
| targetIpAddress |
Specifies the address to be used as the destination
for the VPRN trace test.
type=InetAddress default=0.0.0.0 Displayed(tab/group)=Target IP Address (Test Parameters/Test Probe) |
| targetIpAddressType |
Specifies the address to be used as the destination
for the VPRN trace test.
type=rtr.InetAddressType default=ipv4 |
| vprnAccessInterfacePointer |
type=Pointer default= |
| vprnSite |
The VPRN site to test.
type=Pointer access=read-create default= Mandatory on create Displayed(tab/group)=VPRN Site (/Test Object) |
| Overridden Properties | |
|---|---|
| packetTimeout |
Specifies the number of seconds to wait for the
response of a sent probe.
default=1 |
| Properties inherited from sas.Trace |
|---|
| assurance, maxFailures, maxHistoryRows, packetInterval, packetSize, packetTimeout, packetsToSend, testType, trapGenerationPolicy |
| Properties inherited from sas.AbstractTest |
|---|
| administrativeState, description, displayedName, failures, globalId, id, lastRunResult, runs, weight |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Methods inherited from sas.Test |
|---|
| adhocExecuteAndWait, executeAndWait, setNeSchedulableAdminState |
| Methods inherited from sas.AbstractTest |
|---|
| execute, stop |