| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| addrType |
type=rtr.InetAddressType access=read-create default=ipv4 |
| creationOrigin |
type=svt.L2RouteOriginType access=read-create default=manual |
| groupAddress |
Multicast group address of the entry.
type=InetAddress access=read-create Mandatory on create Displayed(tab/group)=Group Address |
| groupAddressType |
Type of address of the multicast group address.
type=rtr.InetAddressType access=read-only |
| jpRptState |
Join Prune Rpt state for this entry on the interface. PIM Join or Prune messages
are sent by the downstream routers towards the RPF' neighbor.
(S,G,rpt) state is a result of receiving (S,G, rpt) JP message from
the downstream router on the RP tree.
type=vpls.UpstreamJpState access=read-only default=noInfo Displayed(tab/group)=JP RPT State |
| jpState |
Join Prune state for this entry on the interface. PIM Join or Prune messages are sent
by the downstream routers towards the RPF' neighbor.
type=vpls.UpstreamJpState access=read-only default=noInfo Displayed(tab/group)=JP State |
| jpTimer |
Time remaining before the router transitions the value of
jpState to 'noInfo'.
The timer is started or restarted when a valid Join message is
received. If the value of this object is zero and
jpState is 'join' state, it means that the
downstream router sent a holdtime of '0xffff'. In this case,
jpState will not transition until an appropriate
cancelling of Join or Prune message is received.
type=long access=read-only default=0 units=seconds Displayed(tab/group)=JP Timer |
| prunePendTimer |
Time remaining before the router transitions the value of
jpState to 'noInfo'. The timer is set when the
PIM Prune message is received.
type=long access=read-only default=0 units=seconds Displayed(tab/group)=Prune Pend Timer |
| rptJpTimer |
Time remaining before the router transitions the value of
jpRptState to 'noInfo'. The timer is started or restarted when a valid Join message is
received. If the value of this object is zero and jpRptState is in 'join' state, it means that the
downstream router sent a holdtime of '0xffff'. In this case, jpRptState will not transition until an appropriate
cancelling of Join or Prune message is received from the downstream router.
type=long access=read-only default=0 units=seconds Displayed(tab/group)=RPT JP Timer |
| rptPrunePendTimer |
Time remaining before the router transitions the value of
jpRptState to 'noInfo'. The timer is set when
the (S,G,rpt) PIM Prune message is received.
type=long access=read-only default=0 units=seconds Displayed(tab/group)=RPT Prune Pend Timer |
| serviceId |
type=long access=read-only default=0 |
| siteSourceGroupRecordPointer |
type=Pointer access=read-only default= Displayed(tab/group)=Site (S,G) Record |
| sourceAddress |
Source address of the multicast sender.
type=InetAddress access=read-create Mandatory on create Displayed(tab/group)=Source Address |
| sourceAddressType |
Type of source address of the multicast sender.
type=rtr.InetAddressType access=read-only |
| srcGroupFlags |
Indicates the different lists that this vxlan belongs to.
type=vpls.PimSnoopingSourceGroupInterfaceFlags access=read-only Displayed(tab/group)=(S,G) Flags |
| tepAddr |
indicates the VXLAN Tunnel End point address of ethernet VPN destination
type=InetAddress access=read-create Mandatory on create |
| upTime |
Time since this source group entry got created.
type=long access=read-only default=0 units=seconds Displayed(tab/group)=Up Time |
| vni |
VXLAN VNI is the network identifier og the end point of ethernet
type=long access=read-create Mandatory on create |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| 7450 ESS | Supported from 16.0.R1 |
| 7750 SR | Supported from 16.0.R1 |
| 7950 XRS | Supported from 16.0.R1 |