| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| addrType |
type=rtr.InetAddressType access=read-create default=ipv4 |
| creationOrigin |
type=svt.L2RouteOriginType access=read-create default=manual |
| designatedRouterPriority |
Neighbor's DR priority which is received in the hello message. If the Hello
Message did not contain the DR priority field, the value of this
object will be set to '1' and designatedRouterPriorityInHello
will be set to 'false'.
type=long access=read-only Displayed(tab/group)=Designated Router Priority |
| designatedRouterPriorityInHello |
whether the DR priority field was present in the Hello message received from the
PIM snooping neighbor. If present, the value is set to 'true'.
type=boolean access=read-only Displayed(tab/group)=Designated Router Priority Present In Hello Packet |
| expiryTime |
Minimum time remaining before this PIM snooping neighbor will be aged out.
If the value of this object is zero, it means that this neighbor will
never be aged out. This happens when the PIM snooping neighbor sends a
Hello message with Holdtime set to `0xffff'.
type=long access=read-only default=0 units=seconds Displayed(tab/group)=Expiry Time |
| generatedId |
Randomly generated 32-bit value that is regenerated each time PIM forwarding is
started or restarted on the interface, including when the router
itself restarts. When a Hello message with a new
generatedId is received from a neighbor, any old Hello
information about that neighbor is discarded and superseded by the
information from the new Hello message.
type=long access=read-only Displayed(tab/group)=Generated ID |
| holdTime |
Value of the hold time present in the Hello message.
type=long access=read-only default=0 units=seconds Displayed(tab/group)=Hold Time |
| lanDelay |
Lan delay field present in the Hello message received from the neighbor. If the
neighbor did not send this field, a default value of 500 ms is used
and the value of lanDelay is set to 'false'.
type=long access=read-only Displayed(tab/group)=LAN Delay |
| lanDelayInHello |
Whether the Hello message received from the neighbor contained the Lan Delay field.
If present, the value is set to 'true'.
type=boolean access=read-only Displayed(tab/group)=LAN Delay Present In Hello Packet |
| neighborAddrType |
type=rtr.InetAddressType access=read-create default=ipv4 |
| neighbourAddress |
IP address of the PIM snooping neighbor for which this entry contains
information.
type=InetAddress access=read-create Mandatory on create Displayed(tab/group)=Neighbor Address |
| overrideInterval |
Value of the override interval present in the Hello message.
type=long access=read-only default=0 units=seconds Displayed(tab/group)=Override Interval |
| serviceId |
type=long access=read-only default=0 |
| tepAddr |
indicates the VXLAN Tunnel End point address of ethernet VPN destination
type=InetAddress access=read-create Mandatory on create |
| trackingSupport |
Whether the T bit in the LAN Prune Delay option was present in the Hello message.
This indicates the neighbor's capability to disable Join message suppression."
type=boolean access=read-only Displayed(tab/group)=Tracking Support |
| upTime |
Time since this PIM snooping neighbor last became a neighbor of the
local router.
type=long access=read-only default=0 units=seconds Displayed(tab/group)=Up Time |
| vni |
VXLAN VNI is the network identifier og the end point of ethernet
type=long access=read-create Mandatory on create |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| 7450 ESS | Supported from 16.0.R1 |
| 7750 SR | Supported from 16.0.R1 |
| 7950 XRS | Supported from 16.0.R1 |