| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| creationOrigin |
type=svt.L2RouteOriginType access=read-create default=manual |
| groupAddress |
Indicates the multicast group address of the entry.
type=InetAddress access=read-create Mandatory on create Displayed(tab/group)=Group Address |
| groupAddressType |
Indicates the type of address of the multicast group address.
type=rtr.InetAddressType access=read-only |
| jpRptState |
Indicates the Join Prune Rpt state for this entry on the evpn-mpls.
PIM Join or Prune messages are sent by the downstream routers towards the RPF neighbor.
(S,G,rpt) state is a result of receiving (S,G, rpt) JP message from the downstream router on the RP tree.
type=vpls.UpstreamJpState access=read-only default=noInfo Displayed(tab/group)=JP RPT State |
| jpState |
Indicates the Join Prune state for this entry on the evpn-mpls.
PIM Join or Prune messages are sent by the downstream routers towards the RPF neighbor.
type=vpls.UpstreamJpState access=read-only default=noInfo Displayed(tab/group)=JP State |
| jpTimer |
Indicates the time remaining before the evpn-mpls transitions the value of JPState to 'noInfo'.
The timer is started or restarted when a valid Join message is
received. If the value of this object is zero and JPState is 'join' state,
it means that the downstream router sent a holdtime of '0xffff'.
In this case, JPState will not transition until an appropriate cancelling of Join or Prune message is received.
type=long access=read-only default=0 units=seconds Displayed(tab/group)=JP Timer |
| prunePendTimer |
Indicates the time remaining before the evpn-mpls transitions the value of
JPState to 'noInfo'. The timer is set when the PIM Prune message is received.
type=long access=read-only default=0 units=seconds Displayed(tab/group)=Prune Pend Timer |
| rptJpTimer |
Indicates the time remaining before the evpn-mpls transitions the value of JPRptState to 'noInfo'.
The timer is started or restarted when a valid Join message is received.
If the value of this object is zero and JPRptState is in 'join' state, it means that the
downstream router sent a holdtime of '0xffff'. In this case, JPRptState will not transition
until an appropriate cancelling of Join or Prune message is received from the downstream router.
type=long access=read-only default=0 units=seconds Displayed(tab/group)=RPT JP Timer |
| rptPrunePendTimer |
Indicates the time remaining before the evpn-mpls transitions the value of JPRptState to 'noInfo'.
The timer is set when the (S,G,rpt) PIM Prune message is received.
type=long access=read-only default=0 units=seconds Displayed(tab/group)=RPT Prune Pend Timer |
| serviceId |
type=long access=read-only default=0 |
| siteSourceGroupRecordPointer |
type=Pointer access=read-only default= Displayed(tab/group)=Site (S,G) Record |
| sourceAddress |
Indicates the source address of the multicast sender.
type=InetAddress access=read-create Mandatory on create Displayed(tab/group)=Source Address |
| sourceAddressType |
Indicates the type of source address of the multicast sender.
type=rtr.InetAddressType access=read-only |
| srcGroupFlags |
Indicates the different lists that this evpn-mpls belongs to.
type=vpls.PimSnoopingSourceGroupInterfaceFlags access=read-only Displayed(tab/group)=(S,G) Flags |
| upTime |
Indicates the time since this source group entry got created.
type=long access=read-only default=0 units=seconds Displayed(tab/group)=Up Time |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| 7450 ESS | Supported from 15.0.R1 |
| 7750 SR | Supported from 15.0.R1 |
| 7950 XRS | Supported from 15.0.R1 |