| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| arpNdExtCommunityAdvertisement |
Specifies whether to advertise along with the MAC/IP routes advertised for local static and dynamic proxy-ARP/ND entries.
It also controls the processing of the arp/nd extended community and the selection of ARP/ND entries based on the Inmutable flag.
type=boolean default=false Displayed(tab/group)=ARP ND Extended Community Advertisement |
| bgpEvpnAcceptIvplsEvpnFlush |
This command enables the system to accept non-zero ethernet-tag mac routes and process them ONLY
for cmac-flushing.
type=boolean default=false Displayed(tab/group)=Accept I-VPLS EVPN Flush applicable=false (Where parent is one of (vpls.Site)) |
| bgpEvpnCfmMacAdvertisement |
Specifies whether or not to advertise the VPLS service's operational Up MEP, MIP, and
Virtual MEP (VMEP) MAC addresses over BGP-EVPN.
type=generic.TruthValue default=false Displayed(tab/group)=CFM MAC Advertisement |
| bgpEvpnDetTrustedMacMoveFactor |
Determines the factor by which the num-moves is multipled when detecting a mac duplication event for trusted MACs.
As an example, if num-moves=5, and trusted-mac-move-factor=3, while 5 moves within the window is enough
to declare a non-trusted mac as duplicate, 15 moves would be need to declare a trusted mac as duplicate.
type=int default=1 minimum=1 maximum=10 units=minutes Displayed(tab/group)=Detect Trusted MAC Move Factor (/MAC Duplication) |
| bgpEvpnInclusiveMcastOrigAddr |
specifies the original IP address and PTA tunnel-endpoint in the IMET routes for this service
type=InetAddress default=0.0.0.0 Displayed(tab/group)=Inclusive Multicast Original Address |
| bgpEvpnInclusiveMcastOrigAddrType |
Specifies the address type of bgpEvpnIncusiveMcastOrigAddr.
type=rtr.InetAddressType default=ipv4 |
| bgpEvpnIngressRepIncMcastAdv |
Specifies whether the IMET-IT routes will be advertised for this service. If bgpEvpnIngressRepIncMcastAdv is 'false(2)', no IMET routes will
be sent for the service unless provider tunnel is configured with owner bgp-evpn-mpls and root-and-leaf.
type=generic.TruthValue default=true Displayed(tab/group)=Advertise Inclusive Multicast Routes with Ingress Replication |
| bgpEvpnIpRouteAdvInclHost |
Specifies whether IP Routes advertised by BGP EVPN will include '/32' host routes.
type=boolean default=false Displayed(tab/group)=Inclusive Host |
| bgpEvpnIpRouteAdvertisement |
Specifies whether IP Routes will be advertised by BGP EVPN or not.
type=generic.TruthValue default=false Displayed(tab/group)=Advertise IP Routes |
| bgpEvpnMacAdvDefaultRoute |
Specifies whether the default mac will be advertised to BGP or not.
When the value of bgpEvpnMacAdvDefaultRoute is true, only the Default-mac is advertised.
type=generic.TruthValue default=false Displayed(tab/group)=Unknown MAC Route |
| bgpEvpnMacAdvertisement |
Specifies whether all the non BGP EVPN macs will be advertised to BGP or not
type=generic.TruthValue default=true Displayed(tab/group)=MAC Advertisement |
| bgpEvpnMacDupBlackHoleEnabled |
It specifies whether black-hole
traffic detected on the duplicated MAC address in this service
type=generic.TruthValue default=false Displayed(tab/group)=MAC Duplication Black Hole Enabled (/MAC Duplication) applicable=false (Where parent is one of (vpls.BSite)) |
| bgpEvpnMacDupDetNumDups |
Indicates the number of duplicate MAC addresses in BGP-EVPN in a VPLS service context.
type=long access=read-only Displayed(tab/group)=Number Of Duplicate MAC Addresses (/MAC Duplication) |
| bgpEvpnMacDupDetNumMoves |
Specifies number of moves with in bgpEvpnMacDupDetWindow between evpn and non-evpn destinations above which a MAC is considered duplicate.
This can be due to loops, incorrect configuration in the network etc.
type=int default=5 minimum=3 maximum=10 Displayed(tab/group)=MAC Duplication Detect Number Of Moves (/MAC Duplication) |
| bgpEvpnMacDupDetRetry |
Indicates the hold down time in minutes.
This value is expected to be equal to or more than two times that of bgpEvpnMacDupDetWindow.
If bgpEvpnMacDupDetRetry is set to its default value, this implies that once a duplicate MAC is detected,
until a user intervenes or a network event (MAC flush) occurs, updates for that MAC will be held down.
In the absence of the above mentioned events, MAC duplication detection will be tried again after bgpEvpnMacDupDetRetry time.
This value is expected to be either 0 (= no auto retry) or equal to more than two times that of bgpEvpnMacDupDetWindow.
type=int default=9 minimum=0 maximum=60 units=minutes Displayed(tab/group)=MAC Duplication Retry (/MAC Duplication) |
| bgpEvpnMacDupDetWindow |
Specifies the length of the window in minutes.
type=int default=3 minimum=1 maximum=15 units=minutes Displayed(tab/group)=MAC Duplication Detect Window (/MAC Duplication) |
| bgpEvpnSelMcastAdvertise |
Specifies whether to advertise SMET (Selective Multicast Ethernet Tag) evpn routes.
type=generic.TruthValue default=false Displayed(tab/group)=Advertise Selective Multicast Ethernet Tag |
| bgpEvpnTrustedMacTime |
Determines how a long a MAC address needs to stay in the FDB as type learned without being flushed
or changed in its type so the MAC is declared as trusted.
If the MAC changes from SAP to SAP within the same VPLS service and node, the MAC does not reset its trusted-mac timer.
type=int default=5 minimum=1 maximum=15 units=minutes Displayed(tab/group)=Trusted MAC Time (/MAC Duplication) |
| bgpEvpnVxlanAdminStatus |
Specifies the desired administrative state for VLAN under BGP EVPN context in this VPLS service.
Note: Nokia 7x50 has changed BgpEvpn MIB Structure from 16.0.R1+ node release.
NFM-P class structure has also been modified to support the new functionality.
Its recommended to use 'BgpEvpnVxlan.bgpEvpnAdminStatus' for Nokia 7x50 nodes from 16.0.R1+ node release.
type=vpls.VXLANAdminState default=down Displayed(tab/group)=Administrative State (/VXLAN) applicable=false (Where parent is one of (vpls.BSite)) |
| bgpEvpnVxlanBgpId |
The value of bgpEvpnVxlanBgpInstanceId specifies the BGP instance used with
this service.
Note: Nokia 7x50 has changed BgpEvpn MIB Structure from 16.0.R1+ node release.
NFM-P class structure has also been modified to support the new functionality.
Its recommended to use 'BgpEvpnVxlan.bgpInstanceId' for Nokia 7x50 nodes from 16.0.R1+ node release.
type=int access=read-only default=1 minimum=1 maximum=2 Displayed(tab/group)=VXLAN BGP ID (/VXLAN) |
| creationOrigin |
type=svt.L2RouteOriginType access=read-create default=manual |
| domainId |
Specifies the Domain ID used in D-Path for routes advertisement.
type=string default=0:0 Displayed(tab/group)=D-Path Domain ID |
| domainIdHexValue |
Specifies the HEX format of Domain-id in MIB
type=string access=read-only default=00 00 00 00 00 00 |
| ignoreMtuMismatch |
The value of ignoreMtuMismatch specifies whether to ignore the received layer-2 MTU
in the L2 Attributed extended community of the IMET route for a peer.
type=boolean default=false Displayed(tab/group)=Ignore MTU Mismatch |
| inclusiveMcastL2AtrrAdvertisement |
The value of inclusiveMcastL2AtrrAdvertisement specifies whether to advertise the layer-2
attributes extended community in inclusive-mcast routes
type=boolean default=false Displayed(tab/group)=Incl Mcast Advertise L2 Atrributes applicable=false (Where parent is one of (vpls.BSite)) |
| ipRouteAdvertiseLinkBw |
Specifies whether to advertise the link bandwidth for evpn-iff routes.
type=boolean default=false Displayed(tab/group)=Advertise (/EVPN Link Bandwidth) |
| ipRouteAdvertiseLinkBwMaxWeight |
Specifies the maximum weight to be advertised with evpn-iff routes. This is effective only
when ipRouteAdvertiseLinkBw is enabled.
type=int default=128 minimum=1 maximum=128 Displayed(tab/group)=Maximum Dynamic Weight (/EVPN Link Bandwidth) |
| ipRouteAdvertiseLinkBwWeight |
Specifies the weight to be advertised with evpn-iff routes. This is effective only when
ipRouteAdvertiseLinkBw is enabled.
type=int default=0 minimum=0 maximum=128 Displayed(tab/group)=Weight (/EVPN Link Bandwidth) |
| ipRouteWeightedEcmp |
Specifies the weight to be advertised with evpn-iff routes.
type=boolean default=false Displayed(tab/group)=Weighted ECMP (/EVPN Link Bandwidth) |
| mplsBgpId |
Specifies the BGP instance used with this service.
Note: Nokia 7x50 has changed BgpEvpn MIB Structure from 16.0.R1+ node release.
NFM-P class structure has also been modified to support the new functionality.
Its recommended to use 'BgpEvpnMpls.bgpInstanceId' for Nokia 7x50 nodes from 16.0.R1+ node release.
type=int default=1 minimum=1 maximum=2 Displayed(tab/group)=BGP ID (/MPLS) |
| mplsIngressRepBumLabel |
Specifies whether to advertise a different label for inclusive multicast routes, or use the same label as the one advertised for unicast traffic.
Note: Nokia 7x50 has changed BgpEvpn MIB Structure from 16.0.R1+ node release.
NFM-P class structure has also been modified to support the new functionality.
Its recommended to use 'BgpEvpnMpls.mplsIngressRepBumLabel' for Nokia 7x50 nodes from 16.0.R1+ node release.
type=boolean default=false Displayed(tab/group)=Ingress Replication Bum Label (/MPLS) |
| mplsRestrictProtectedSrc |
Specifies how the agent will handle relearn requests for protected MAC addresses. When the
value of this object is 'true', requests to relearn a protected MAC address will be ignored.
type=boolean default=false Displayed(tab/group)=Restrict Protected Source (/MPLS) |
| mplsRestrictProtectedSrcAction |
Specifies the action to take whenever a relearn request for a protected MAC is received on a
restricted SAP.
When the value of this object is 'discardFrame', the SAP will start
discarding the frame.
type=int default=1 Displayed(tab/group)=Restrict Protected Source Action (/MPLS) enums= 1: discardFrame - Discard-Frame |
| mplsShgPointer |
Pointer to the Split Horizon Group Site.
Note: Nokia 7x50 has changed BgpEvpn MIB Structure from 16.0.R1+ node release.
NFM-P class structure has also been modified to support the new functionality.
Its recommended to use 'BgpEvpnMpls.mplsShgPointer' for Nokia 7x50 nodes from 16.0.R1+ node release.
type=Pointer default= Displayed(tab/group)=Split Horizon Group (/MPLS) |
| vpls.BgpEvpnMpls-Set |
type=Children-Set |
| vpls.BgpEvpnSRv6-Set |
type=Children-Set |
| vpls.BgpEvpnVxlan-Set |
type=Children-Set |
| vxlanSendEvpnEncapsulation |
Specifies whether a RFC5512 vxlan tunnel encap extended community is included in
BGP EVPN VXLAN route advertisements.
Note: Nokia 7x50 has changed BgpEvpn MIB Structure from 16.0.R1+ node release.
NFM-P class structure has also been modified to support the new functionality.
Its recommended to use 'BgpEvpnVxlan.vxlanSendEvpnEncapsulation' nodes from 16.0.R1+ for Nokia 7x50 node.
type=boolean default=true Displayed(tab/group)=VXLAN Send EVPN Encapsulation (/VXLAN) |
| vxlanSendImetIrOnNonDesignatedForwarder |
Specifies whether the router will advertise IMET-IR routes even when the PE is not a
designated forwarder.
Note: Nokia 7x50 has changed BgpEvpn MIB Structure from 16.0.R1+ node release.
NFM-P class structure has also been modified to support the new functionality.
Its recommended to use 'BgpEvpnVxlan.vxlanSendImetIrOnNonDesignatedForwarder' for Nokia 7x50 nodes from 16.0.R1+ node release.
type=boolean default=true Displayed(tab/group)=VXLAN IMET-IR On NDF (/VXLAN) |
| Overridden Properties | |
|---|---|
| mplsForceVlanVcForwarding |
Specifies whether or not vc-vlan-type forwarding is forced in the data-path for BGP EVPN MPLS.
Note: Nokia 7x50 has changed BgpEvpn MIB Structure from 16.0.R1+ node release.
NFM-P class structure has also been modified to support the new functionality.
Its recommended to use 'BgpEvpnMpls.mplsForceVlanVcForwarding' for Nokia 7x50 nodes from 16.0.R1+ node release.
applicable=false (Where parent is one of (vpls.BSite)) |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |