Overview Package Class Deprecated Help

vpls
BgpAdSite

This class represents the BGP-AD configurable components for a VPLS service. As of now, this object is only applicable for regular VSI and B-VSI (not I-VSI) and is not compatible with MVPLS (but might be in the future).

public class BgpAdSite

Properties
administrativeState The administrative state of the BGP-AD on this VPLS site instance.

type=vpls.RadiusDiscoveryAdminState
default=down
Displayed(tab/group)=
    •  vpls.BSite  Administrative State (BGP.General/BGP AD)
    •  vpls.Site  Administrative State (BGP.General/BGP AD)
creationOrigin

type=svt.L2RouteOriginType
access=read-create
default=manual
siteId

type=string
access=read-only
default=0.0.0.0
maximum=50
siteServiceId The Site Service ID associated to this object as retrieved from the MIB.

type=long
access=read-only
default=0
vplsId The value of VplsId specifies the globally unique VPLS-id for BGP Auto-Discovery in this VPLS service. The value of AdminStatus cannot be 'enabled' until a VPLS-id has been assigned which is not all zeros. Raw ASCII format.

type=string
access=read-only
default=00 00 00 00 00 00 00 00
vplsIdCli The vplsId value but in a CLI readable format. [ip-addr:comm-val] or [as-number:ext-comm-val]

type=string
default=0:0
minimum=3
maximum=32
Displayed(tab/group)=
    •  vpls.BSite  VPLS ID (BGP.General/BGP AD)
    •  vpls.Site  VPLS ID (BGP.General/BGP AD)
vsiIdPrefixIpFormat The value of the VSI ID Prefix but in an IP format for better readability.

type=InetAddress
default=0.0.0.0
Displayed(tab/group)=
    •  vpls.BSite  Formatted VSI ID Prefix (BGP.General/BGP AD)
    •  vpls.Site  Formatted VSI ID Prefix (BGP.General/BGP AD)
vsiIdPrefixIpFormatAddrType

type=rtr.InetAddressType
default=ipv4

valid enums=ipv4 (Where parent is one of (vpls.BSite, vpls.Site))
vsiIdPrefixRaw The value of vsiIdPrefixRaw specifies the low-order 4 bytes used to compose the Virtual Switch Instance identifier (VSI-id) to use for NLRI in BGP Auto-Discovery in this VPLS service. If the value of this attribute is 0, the system IP address will be used.

type=long
access=read-only
default=0
minimum=0
maximum=4294967295
vsiRd The value of VsiRD specifies the high-order 6 bytes used to compose the Virtual Switch Instance identifier (VSI-id) to use for NLRI in BGP Auto-Discovery in this VPLS service. If the value is 0x0000000000000000, the lower 6 bytes of the VPLS-id, as specified by the VplsId, will be used."

DEPRECATED: 8.0R3 - OBSOLETE: Use vpls.BgpCfg.rdHexValue instead.
type=string
access=read-only
default=00 00 00 00 00 00 00 00
vsiRdCli The VsiRd value but in a CLI readable format. [ip-addr:comm-val] or [as-number:ext-comm-val]

DEPRECATED: 8.0R3 - OBSOLETE: Use svr.BgpCfg.routeDistinguisher instead.
type=string
default=0:0
minimum=3
maximum=32
  
Properties inherited from ManagedObject
actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed
 
Supported Network Elements
7450 ESS Supported from 6.0.R4
7750 SR Supported from 6.0.R4
7705 SAR Gen 2
7705 SAR Hm
7950 XRS
7210 SAS M Supported from 5.0.R1
  • Required Capabilities: NetworkMode
7210 SAS T Supported for all versions
  • Required Capabilities: NetworkMode
7210 SAS Mxp Supported for all versions
  • Required Capabilities: NetworkMode
7210 SAS S/Sx
7210 SAS X Supported from 5.0.R1
7210 SAS R
7250 IXR
7210 SAS K Supported from 9.0.R6
  • Required Capabilities: NetworkMode