| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| bVid |
The value of svcbVplsVid specifies the b-vid for b-vpls and it is
a mandatory parameter when creating a b-vpls service.
type=int access=read-create default=1 minimum=1 maximum=4094 Displayed(tab/group)=B-VID |
| backboneSrcMac |
Specifies the Backbone Source MAC-Address for PBB packets.
If not provisioned, it defaults to the loopback chassis
MAC-Address.
type=MacAddress default=00-00-00-00-00-00 |
| backboneUseEsiBMac |
Specifies the use of an ESI-BMAC(Ethernet segment identifier-Backbone Mac) derived from the operBackboneSrcMac and tmnxSvcSysEthSegSourceBMacLSB.
type=boolean default=false |
| backboneUseSapBMac |
The value of backboneUseSapBMac specifies whether to enable dual-homing to use
source Backbone MAC-Address allocated for multi-homed SAPs (assigned to an MC-LAG)
in the related service with svcVplsType set to 'i-vpls' or with svcType set to 'epipe'.
type=boolean default=false |
| bgpAdEnabled |
Specifies whether BGP AD is enabled on this site.
type=boolean default=false |
| bgpAutoDiscoveryAdminState |
Specifies whether BGP auto-discovery is enabled on this service.
DEPRECATED: 8.0R3 - OBSOLETE: Use bgpAdEnabled instead. type=vpls.RadiusDiscoveryAdminState default=down |
| bgpEnabled |
Specifies whether BGP is enabled on this site.
Note: Before SR 10.0, BGP is enabled by default on the node with vpls Site creation. After 10.0,
BGP needs to be manually enabled on the node under vpls Site.
type=boolean default=false |
| bgpVplsEnabled |
Specifies whether BGP VPLS is enabled on this site.
type=boolean default=false |
| clear.ClearRequest-Set |
type=Children-Set |
| ethernetoam.CfmVlanDefaultMd-Set |
type=Children-Set |
| l2fib.MFibGrpSrc-Set |
type=Children-Set |
| macNotifAdminState |
The value of macNotifAdminState specifies whether MAC notification messages should be sent.
type=generic.EnabledDisabled default=disabled |
| macNotifCount |
The value of macNotifCount specifies number of MAC notification messages to be sent.
The default value for this object indicates that the value is inherited from chassis level
macNotifCount.
type=int default=0 minimum=0 maximum=10 |
| macNotifInterval |
The value of macNotifInterval specifies time-interval between subsequent
MAC notification messages. The default value for this object indicates
that the value is inherited from chassis level macNotifInterval.
type=int default=0 minimum=0 maximum=100 |
| macRenotifyInterval |
The value of macRenotifyInterval specifies time-interval between subsequent burst of MAC
notification messages. The valid range is 0 (Disabled) or 240...840.
type=int default=0 minimum=0 maximum=840 |
| mfibTableHighWatermark |
Specifies the utilization of the MFIB table of this site
at which a table full alarm will be raised.
type=long default=95 minimum=0 maximum=100 units=% Displayed(tab/group)=High Watermark (Forwarding Control.MFIB/MFIB) |
| mfibTableLowWatermark |
Specifies utilization of the MFIB table of this site
at which a table full alarm will be cleared.
type=long default=90 minimum=0 maximum=100 units=% Displayed(tab/group)=Low Watermark (Forwarding Control.MFIB/MFIB) |
| mfibTableSize |
Specifies the maximum number of entries allowed in the MFIB
table of this site. If the value is 0, then there is no limit.
type=long default=0 minimum=0 maximum=40959 units=entries Displayed(tab/group)=Table Size (Forwarding Control.MFIB/MFIB) |
| numberOfMeshSdpBindings |
The number of mesh SDP Bindings directly
connected to this site.
type=int access=read-only default=0 |
| operBackboneSrcMac |
Indicates the operational Backbone Source MAC-Address for
PBB packets.
type=MacAddress access=read-only default=00-00-00-00-00-00 |
| svt.MeshSdpBinding-Set |
type=Children-Set |
| svt.SpokeSdpBinding-Set |
type=Children-Set |
| topologyAutoCompletion |
IMPORTANT: Used internally by NFM-P, clients -
other than NFM-P GUI - should not use this
property. Value is copied from the parent
(service). Whether NMS should automatically
create the Mesh SDP bindings. If 'false' the
user has to manually create the SDP bindings.
type=boolean access=read-only |
| vMepExtensions |
The value of vMepExtensions specifies whether enhanced Virtual MEP functionality is enabled on
the service or not.
type=boolean default=false Displayed(tab/group)=Enable Virtual MEP Extension (OAM.ETH-CFM/Virtual MEPs) |
| vplsId |
The VPLS-ID of this B-VPLS Instance is BGP-AD is supported. This value will be
used to uniquely identify this service. This attribute will could be displayed
on the GUI if the use enables BGP-AD at the site level. This step has to be
done manually at each instance site level. This value will be taken from the
NFM-P service object.
type=string access=read-only default=0:0 minimum=3 maximum=32 |
| vxlanSrcTepIpAddr |
Specifies the tunnel source IP address when doing VXLAN encapsulation of frames for this
service (source VTEP).
type=InetAddress default=0.0.0.0 Displayed(tab/group)=Source IP Address (/VXLAN Tunnel End Point) |
| vxlanSrcTepIpAddrType |
Specifies the type of IP address associated with vxlanSrcTepIpAddrvpls.
type=rtr.InetAddressType default=ipv4 |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Methods inherited from service.Site |
|---|
| findSitesFor, shutDown, turnUp |
| Supported Network Elements | |
|---|---|
| 7450 ESS | |
| 7750 SR | |
| 7705 SAR Hm | |
| 7210 SAS M | |
| 7210 SAS X | |
| 7210 SAS T | |
| 7950 XRS | |
| DC 7850 | |
| DC 210 | |
| DC VSA8 | |
| DC VSC | |
| Product Specifics | |
| 7210 SAS M 20.0 | |
| 7210 SAS M 21.0 | |
| 7210 SAS T 20.0 | |
| 7210 SAS T 21.0 | |
| 7210 SAS T 22.0 | |
| 7210 SAS T 23.0 | |
| 7210 SAS T 24.0 | |
| 7210 SAS T 25.0 | |
| 7450 ESS 20.0 | |
| 7450 ESS 21.0 | |
| 7450 ESS 22.0 | |
| 7450 ESS 23.0 | |
| 7450 ESS 24.0 | |
| 7450 ESS 25.0 | |
| 7705 SAR Hm 20.0 | |
| 7705 SAR Hm 21.0 | |
| 7705 SAR Hm 22.0 | |
| 7705 SAR Hm 23.0 | |
| 7705 SAR Hm 24.0 | |
| 7705 SAR Hm 25.0 | |
| 7750 SR 20.0 | |
| 7750 SR 21.0 | |
| 7750 SR 22.0 | |
| 7750 SR 23.0 | |
| 7750 SR 24.0 | |
| 7750 SR 25.0 | |
| 7950 XRS 20.0 | |
| 7950 XRS 21.0 | |
| 7950 XRS 22.0 | |
| 7950 XRS 23.0 | |
| 7950 XRS 24.0 | |
| 7950 XRS 25.0 | |