topology.BgpRouteChangeThresholdPerRTargetAlarmThreshold (NSP Network Functions Manager

topology
BgpRouteChangeThresholdPerRTargetAlarmThreshold

Settings for the BgpRouteChangeThresholdPerRTargetReached alarm.

Inheritance Hierarchy
- ManagedObject
  - topology.RoutingAlarmThreshold
    - topology.CpaaSpecificAlarmThreshold
      - topology. BgpRouteChangeThresholdPerRTargetAlarmThreshold

Parent Hierarchy
- topology.RoutingAlarmManager
  - topology.BgpRouteChangeThresholdPerRTargetAlarmThreshold [tpgy-rtr-alarm-mgr:[${alarmName}][-cpaa-${cpaaPointer}][rt-$%{routeTarget}]]

Children Hierarchy
- topology.BgpRouteChangeThresholdPerRTargetAlarmThreshold

Relationships
- many topology.BgpRouteChangeThresholdPerRTargetAlarmThresholds may be direct children of one topology.RoutingAlarmManager (child-parent relationship)
- many topology.BgpRouteChangeThresholdPerRTargetAlarmThresholds may be associated with topology.RoutingAlarmType (implied relationship)

BgpRouteChangeThresholdPerRTargetAlarmThreshold

Relative Name=[${alarmName}][-cpaa-${cpaaPointer}][rt-$%{routeTarget}]

The ':' in the Route Target is replaced with '%'. For instance, 65000:20 is modified to 65000%20.

Displayed Name=BGP Route Change Per RT Threshold

configureChildInstanceWithResult() does not return children.

configureInstanceWithResult() does not return children.

findMultipleFilteredInstances() does not return children.

Properties
baseLine	Represents the BaseLine for the alarm DEPRECATED: 8.0R5 - Replaced by baselineResetInterval type=long default=1 minimum=1 maximum=4294967296 units=routes
baselineResetInterval	Specifies the interval for adjusting the baseline for the alarm. When you configure a threshold reaching alarm, the baseline is set to current value of the number of routes in the CPAA. For route targets and next hops that have the alarm threshold configured, the CPAA keeps track of the number of routes and calculates a running average on an hourly basis. At the periodic reset interval for each alarm, the CPAA adjusts the baseline value for the alarm to the calculated average. If resetting the baseline causes an alarm to be raised or cleared , the CPAA informs the CPAM. If you modify the Alarm Baseline Reset Interval parameter, the CPAA does not process the modification until the next scheduled hourly averaging interval. type=long default=12 minimum=1 maximum=48 units=hours Displayed(tab/group)=Alarm BaseLine Reset Interval (/Threshold)
format	The route target type, Type 0x00 and 0x02 (AS) or Type 0x01 (IP address). type=topology.VrfTargetFormat access=read-create default=0 Displayed(tab/group)=Type (/Route Target)
routeTarget	Specifies the route target identifier for the Per RT alarm threshold. Enter a string in the format a:b. The values for a and b depend on the option selected for the Type (format) parameter. type=string access=read-create minimum=0 maximum=32 Mandatory on create Displayed(tab/group)=Route Target (/Route Target)

Properties

baseLine

Represents the BaseLine for the alarm

DEPRECATED: 8.0R5 - Replaced by baselineResetInterval
type=long
default=1
minimum=1
maximum=4294967296
units=routes

baselineResetInterval

Specifies the interval for adjusting the baseline for the alarm. When you configure a threshold reaching alarm, the baseline is set to current value of the number of routes in the CPAA. For route targets and next hops that have the alarm threshold configured, the CPAA keeps track of the number of routes and calculates a running average on an hourly basis. At the periodic reset interval for each alarm, the CPAA adjusts the baseline value for the alarm to the calculated average. If resetting the baseline causes an alarm to be raised or cleared , the CPAA informs the CPAM. If you modify the Alarm Baseline Reset Interval parameter, the CPAA does not process the modification until the next scheduled hourly averaging interval.

type=long
default=12
minimum=1
maximum=48
units=hours
Displayed(tab/group)=Alarm BaseLine Reset Interval (/Threshold)

format

The route target type, Type 0x00 and 0x02 (AS) or Type 0x01 (IP address).

type=topology.VrfTargetFormat
access=read-create
default=0
Displayed(tab/group)=Type (/Route Target)

routeTarget

Specifies the route target identifier for the Per RT alarm threshold. Enter a string in the format a:b. The values for a and b depend on the option selected for the Type (format) parameter.

type=string
access=read-create
minimum=0
maximum=32
Mandatory on create
Displayed(tab/group)=Route Target (/Route Target)

Overridden Properties
threshold	Specifies the alarm threshold for route changes, as a percentage of all monitored routes of a specific route target default=10 minimum=10 maximum=100 units=%

Overridden Properties

threshold

Specifies the alarm threshold for route changes, as a percentage of all monitored routes of a specific route target

default=10
minimum=10
maximum=100
units=%

Properties inherited from topology.CpaaSpecificAlarmThreshold
cpaaPointer

Properties inherited from topology.CpaaSpecificAlarmThreshold

cpaaPointer

Properties inherited from topology.RoutingAlarmThreshold
administrativeState, alarmName, errorCode, operationalState, specificAlarmPolicyPointer, threshold

Properties inherited from topology.RoutingAlarmThreshold

administrativeState, alarmName, errorCode, operationalState, specificAlarmPolicyPointer, threshold

Properties inherited from ManagedObject
actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed

Properties inherited from ManagedObject

actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed

Supported Network Elements
7701 CPAA

Supported Network Elements

7701 CPAA

topology BgpRouteChangeThresholdPerRTargetAlarmThreshold

topology
BgpRouteChangeThresholdPerRTargetAlarmThreshold