| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| baseLine |
Represents the BaseLine for the alarm
DEPRECATED: 8.0R5 - Replaced by baselineResetInterval type=long default=1 minimum=1 maximum=4294967296 units=routes |
| baselineResetInterval |
Specifies the interval for adjusting the baseline for the alarm.
When you configure a threshold reaching alarm, the baseline is set to the current value of the
number of routes in the CPAA.
For route targets and next hops that have the alarm threshold configured,
the CPAA keeps track of the number of routes and calculates a running average on an hourly basis.
At the periodic reset interval for each alarm, the CPAA adjusts the baseline value for the alarm
to the calculated average.
If resetting the baseline causes an alarm to be raised or cleared , the CPAA informs the CPAM.
If you modify the Alarm Baseline Reset Interval parameter, the CPAA does not process the
modification until the next scheduled hourly averaging interval.
type=long default=12 minimum=1 maximum=48 units=hours Displayed(tab/group)=Alarm BaseLine Reset Interval (/Threshold) |
| nextHop |
The Next Hop IP address
type=InetAddress access=read-create Mandatory on create Displayed(tab/group)=BGP Next Hop (/Threshold) |
| nextHopAddrType |
type=rtr.InetAddressType access=read-create default=ipv4 |
| Overridden Properties | |
|---|---|
| threshold |
Specifies the alarm threshold for route changes, as a percentage of all monitored routes of a specific next hop.
default=10 minimum=10 maximum=100 units=% |
| Properties inherited from topology.CpaaSpecificAlarmThreshold |
|---|
| cpaaPointer |
| Properties inherited from topology.RoutingAlarmThreshold |
|---|
| administrativeState, alarmName, errorCode, operationalState, specificAlarmPolicyPointer, threshold |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| 7701 CPAA | |