| Overview | Package | Class | Deprecated | Help |
| Values | |
|---|---|
| oamValidationFailed |
value=0x1 bit number=0 displayed=OAM Validation Failed This bit is set when the last execution of the SAS validator associated with the tunnel returned with test failed result. This bit is cleared 1) if the SAS validator returned with success result, or 2) the SAS validator was never executed, or 3) there is no SAS validator associated with the given tunnel. Note that a SAS validator may or may not be associated with the given tunnel (since it not mandatory to have SAS validator for a tunnel). There can be up to 1 SAS validator associated with a tunnel. |
| notOnBindingPort |
value=0x100 bit number=8 displayed=Not On Binding Port This bit indicates that there is no PW port bindings configured under the tunnel. |
| transportTunnelUnstable |
value=0x200 bit number=9 displayed=Transport Tunnel Unstable SDPs monitor and limit the rate at which RSVP and LDP events are generated. If the rate for an LSP (or LDP tunnel) exceeds 10 events in a 10 second window, the LSP (or LDP tunnel) is held down for a period of 20 seconds to stabilize the flapping. This flag is set if this condition occurs. |
| noSystemIpAddress |
value=0x400 bit number=10 displayed=No System IP Address |
| invalidEgressInterface |
value=0x800 bit number=11 displayed=Invalid Egress Interface |
| keepaliveFailure |
value=0x1000 bit number=12 displayed=Keep-Alive Failure |
| transportTunnelDown |
value=0x2000 bit number=13 displayed=Transport Tunnel Down |
| signalingSessionDown |
value=0x4000 bit number=14 displayed=Signaling Session Down |
| tunnelAdminDown |
value=0x8000 bit number=15 displayed=Tunnel Admin Down |