| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| accountingOn |
type=boolean default=true Displayed(tab/group)=Collect Accounting Statistics (Accounting) |
| accountingPolicyId |
type=long access=read-only default=0 |
| accountingPolicyName |
type=string access=read-only default= maximum=252 |
| accountingPolicyPointer |
type=Pointer default= Displayed(tab/group)=Accounting Policy (Accounting) |
| autoSelectReturnTunnel |
type=boolean default=false Displayed(tab/group)=Auto Select Return Transport Tunnel (Return/Auto Tunnel Selection) |
| autoSelectTunnel |
type=boolean default=false Displayed(tab/group)=Auto-Select Transport Tunnel (/Auto Tunnel Selection) |
| classFwdOperState |
Operational state of class forwarding
type=svt.ClassFwdOperState access=read-only default=unknown Displayed(tab/group)=Class Forwarding Operational State (States) |
| cpmProtEthCfmMonitorFlags |
type=service.EthCfmMonitorFlagsType default=0 Displayed(tab/group)=Ethernet CFM Monitor Flags (Security) |
| creationOrigin |
Indicates indicates the protocol or mechanism which created this SDP.
type=svt.L2RouteOriginType access=read-only default=manual Displayed(tab/group)=Creation Mode (/Auto-Creation) |
| dependantOlcState |
type=generic.OLCStates access=read-only default=inService |
| dosProtection |
Pointer specifies the DoS Protection Policy that's applicable to this interface.
type=Pointer default=NE DoS Protection:255 Displayed(tab/group)=NE DoS Protection (Security) |
| egressAggregateFilterId |
type=long access=read-only default=0 minimum=0 maximum=65535 |
| egressFilterId |
type=long access=read-only default=0 minimum=0 maximum=65535 |
| egressFilterName |
type=string access=read-only default= minimum=0 maximum=32 |
| egressFilterPointer |
type=Pointer default= Displayed(tab/group)=Egress Filter (ACL/IP/MAC Filter) |
| egressFilterType |
type=acl.FilterType access=read-only default=none |
| egressInstanceId |
Specifies the instance of the forwarding-plane ingress Queue Group for this SDP binding.
type=long default=0 minimum=0 maximum=65535 Displayed(tab/group)=Instance ID (QoS/Port Redirect) |
| egressIpFilterId |
type=long access=read-only default=0 minimum=0 maximum=65535 |
| egressIpv6FilterId |
The IPv6 filter does not support on 7750SR version 4.0.
type=long access=read-only default=0 minimum=0 maximum=65535 |
| egressIpv6FilterName |
The IPv6 filter does not support on 7750SR version 4.0.
type=string access=read-only default= minimum=0 maximum=32 |
| egressIpv6FilterPointer |
The IPv6 filter does not support on 7750SR version 4.0.
type=Pointer default= Displayed(tab/group)=IPv6 Egress Filter (ACL/IPv6 Filter) |
| egressMacFilterId |
type=long access=read-only default=0 minimum=0 maximum=65535 |
| egressNetworkPolicyPointer |
Specifies the egress QoS network policy applied to this PW template.
type=Pointer default= Displayed(tab/group)=Network Policy (QoS/Port Redirect) |
| egressQueueGroupPolicyPointer |
Specifies the forwarding-plane queue group Policy for this SDP binding.
type=Pointer default= Displayed(tab/group)=Egress Queue Group Template Policy (QoS/Port Redirect) |
| ethernetoam.SdpBindingMip-Set |
type=Children-Set |
| ethernetoam.SdpBindingMipEntry-Set |
type=Children-Set |
| ethernetoam.SdpBindingPriVlanMip-Set |
type=Children-Set |
| etreeLeafAccess |
Specifies whether or not this SDP binding is an e-tree leaf access circuit
type=boolean access=read-create default=false Displayed(tab/group)=Leaf Access (/Etree) |
| etreeRootLeafTag |
Specifies whether or not this SDP binding is e-tree tagging
type=boolean access=read-create default=false Displayed(tab/group)=Root Leaf Tag (/Etree) |
| hashLabel |
Enable/disable MPLS hash label
type=boolean default=false Displayed(tab/group)=Enable Hash Label (/Hash Label) |
| hashLabelSignalCapability |
Specifies whether to signal the hash label capability to the remote PE.
type=boolean default=false Displayed(tab/group)=Enable Signal Capability (/Hash Label) |
| ingressAggregateFilterId |
type=long access=read-only default=0 minimum=0 maximum=65535 |
| ingressFilterId |
type=long access=read-only default=0 minimum=0 maximum=65535 |
| ingressFilterName |
type=string access=read-only default= minimum=0 maximum=32 |
| ingressFilterPointer |
type=Pointer default= Displayed(tab/group)=Ingress Filter (ACL/IP/MAC Filter) |
| ingressFilterType |
type=acl.FilterType access=read-only default=none |
| ingressInstanceId |
Specifies the instance of the forwarding-plane ingress Queue Group for this SDP binding.
type=long default=0 minimum=0 maximum=65535 Displayed(tab/group)=Instance ID (QoS/Forwarding Plane Redirect) |
| ingressIpFilterId |
type=long access=read-only default=0 minimum=0 maximum=65535 |
| ingressIpv6FilterId |
The IPv6 filter does not support on 7750SR version 4.0.
type=long access=read-only default=0 minimum=0 maximum=65535 |
| ingressIpv6FilterName |
The IPv6 filter does not support on 7750SR version 4.0.
type=string access=read-only default= minimum=0 maximum=32 |
| ingressIpv6FilterPointer |
The IPv6 filter does not support on 7750SR version 4.0.
type=Pointer default= Displayed(tab/group)=IPv6 Ingress Filter (ACL/IPv6 Filter) |
| ingressMacFilterId |
type=long access=read-only default=0 minimum=0 maximum=65535 |
| ingressNetworkPolicyPointer |
Specifies the ingress QoS network policy applied to this PW template.
type=Pointer default= Displayed(tab/group)=Network Policy (QoS/Forwarding Plane Redirect) |
| ingressQueueGroupPolicyPointer |
Specifies the forwarding-plane queue group Policy for this SDP binding.
type=Pointer default= Displayed(tab/group)=Ingress Queue Group Template Policy (QoS/Forwarding Plane Redirect) |
| ipMonitoring |
type=boolean default=false Displayed(tab/group)=IP Src Monitoring (Security) |
| l2fwd.CircuitMmrpEntry-Set |
type=Children-Set |
| l2fwd.CircuitMrpInfo-Set |
type=Children-Set |
| lockOlcState |
This is used to lock the OLC State while in OLC Maintenance State only.
type=boolean default=false Displayed(tab/group)=Lock OLC State (/OLC) |
| macMonitoring |
type=boolean default=false Displayed(tab/group)=MAC Monitoring (Security) |
| macPinning |
Antispoofing option on 7450 3.0+
type=svt.MacPinningAdminState default=disabled Displayed(tab/group)=MAC Pinning (Anti-Spoofing) |
| oamEnabled |
Enable/disable OAM for this SdpBinding.
type=boolean default=false |
| olcState |
Object Life Cycle can be set using generic.GenericObject.updateUserObjectLifecycleStates().
type=generic.OLCStates access=read-only default=inService Displayed(tab/group)=Current OLC State (/OLC) |
| operHashLabel |
Indicates the negotiated value of hash label that is used on this SDP binding.
type=boolean access=read-only Displayed(tab/group)=Operational Hash Label (/Hash Label) |
| operationalFlags |
Specifies all the conditions that affect the
operating status of this SdpBinding.
type=svt.CircuitOperFlags access=read-only Displayed(tab/group)=State Cause (States) |
| radiusDiscovery |
Attribute used for RADIUS or BGP-AD Discovery. It is "auto" if the SDP binding
is auto-discovered. The property is not re-named to avoid DB upgrade issues.
type=svt.DiscoveryState access=read-only default=notAuto |
| returnCircuitPointer |
Pointer to the return circuit
type=Pointer access=read-only default= Displayed(tab/group)=Return SDP Binding (Return/Return SDP Binding) |
| sasEntityName |
Attribute used for SAS.
type=string access=read-only minimum=0 maximum=252 |
| sasTestSuiteCount |
type=int access=read-only default=0 minimum=0 Displayed(tab/group)=Test Suite Count |
| sdpMtu |
type=long default=9216 minimum=512 maximum=9216 Displayed(tab/group)=MTU |
| serviceId |
type=long access=read-only default=0 Displayed(tab/group)=Service ID (/Service) |
| serviceName |
type=string access=read-only default= maximum=64 Displayed(tab/group)=Service Name (/Service) |
| serviceType |
type=service.ServiceType access=read-only default=unknown Displayed(tab/group)=Service Type (/Service) |
| spbInterfaceMode |
type=spb.SpbMode access=read-only default=none |
| spbInterfacePointer |
type=Pointer access=read-only default= |
| subType |
Represents the participation type for the SDP Binding. So far
it is only used by VPLS/MVPLS service to indicate it is used as
B-VPLS, I-VPLS or Regular VPLS. The enum value of this type could
be expended when other services require.
type=svt.SubType access=read-only default=unknown |
| subscriberId |
type=long access=read-only Displayed(tab/group)=Customer ID (/Customer) |
| subscriberName |
type=string access=read-only default=0 maximum=255 Displayed(tab/group)=Customer Name (/Customer) |
| svcComponentId |
type=long access=read-only default=0 |
| svt.BgpAdAutoSdpBinding-Set |
type=Children-Set |
| svt.BgpVplsAutoSdpBinding-Set |
type=Children-Set |
| svt.BgpVpwsAutoSdpBinding-Set |
type=Children-Set |
| templateVersionPointer |
Pointer to the template if this object was created from a template.
type=Pointer default= Displayed(tab/group)=Associated Template (Template/Associated Template) |
| tunnelAutoselectionReturnSpokeCircuitTunnelId |
type=long default=0 |
| tunnelSelectionProfile |
The Tunnel Selection Profile that should be used when determining
candidate tunnels during auto selection/creation.
type=Pointer default= Displayed(tab/group)=Tunnel Selection Profile (/Auto Tunnel Selection) |
| tunnelSelectionProfileReturn |
The Tunnel Selection Profile that should be used when determining
candidate tunnels during auto selection/creation.
type=Pointer default= Displayed(tab/group)=Return Tunnel Selection Profile (Return/Auto Tunnel Selection) |
| tunnelSelectionTerminationSiteId |
Used to auto-select a Tunnel to the destination Network Element.
The node ID of the destination Network Element. The destination Network Element
may or may not be managed by NFM-P.
type=InetAddress access=read-create default=0.0.0.0 Displayed(tab/group)=Tunnel Termination Site |
| tunnelSelectionTerminationSiteIdAddrType |
type=rtr.InetAddressType access=read-only default=ipv4 |
| Properties inherited from netw.SignalledCircuit |
|---|
| egressLabel, encapsulationType, ingressLabel, labelMismatch, operationalEgressLabel, operationalIngressLabel, signallingType |
| Properties inherited from netw.UnidirectionalCircuit |
|---|
| actualPathMtu, circuitMtu, circuitTransport, circuitType, isDefaultVcTag, mtuMismatch, pathId, pathMtu, pathName, pathPointer, returnPathId, returnPathName, returnPathPointer, useDefaultVcTag, vcId, vcIdMismatch, vcType, vlanVcTag |
| Properties inherited from netw.PointToPointSubnetworkConnection |
|---|
| fromCtp, fromNodeId, fromNodeName, toCtp, toNodeId, toNodeName |
| Properties inherited from netw.SubnetworkConnection |
|---|
| domain |
| Properties inherited from netw.Connection |
|---|
| administrativeState, application, connectionId, operationalState |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |