| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| action |
The value of 'action' specifies the action to be taken
when a packet matches the selection criteria configured in this
management access filter entry. Before a filter entry can be active,
'action' must be assigned some value other than 'none'.
The value denyHostUnreachable is not allowed for this object.
type=sitesec.MafAction default=none Displayed(tab/group)=Action (/Properties) |
| destinationPort |
Destination Port.
type=long default=0 minimum=0 maximum=65535 Displayed(tab/group)=Destination Port (/Properties) |
| destinationPortMask |
Destination Port Mask.
type=long default=65535 minimum=0 maximum=65535 Displayed(tab/group)=Destination Port Mask (/Properties) |
| fragment |
Specifies whether fragmented or non-fragmented packets are used as a packet match criterion.
When the off option is selected, no match criterion is specified.
When the true option is selected, the parameter specifies a match on all fragmented IP packets.
A match occurs for each packet that has a non-zero value in the MF bit or the Fragment Offset field of the IP header.
When the false option is selected, the parameter specifies a match on all non-fragmented IP packets.
Non-fragmented IP packets have the MF bit and the Fragment Offset field set to zero.
type=acl.ItemMatch default=off Displayed(tab/group)=Fragment (/Properties) |
| isValidSourcePortName |
type=boolean access=read-only default=true |
| l4SourcePort |
L4 Source Port.
type=long default=0 minimum=0 maximum=65535 Displayed(tab/group)=L4 Source Port (/Properties) |
| l4SourcePortMask |
L4 Source Port Mask.
type=long default=65535 minimum=0 maximum=65535 Displayed(tab/group)=L4 Source Port Mask (/Properties) |
| localSourcePortId |
When 'portType' has a value of 'port' or 'lag' the
value of 'localSourcePortId' specifies the port used to restrict
ingress management packets. A value of zero indicated that this
object is not initialized.
type=long access=read-only default=0 |
| log |
type=boolean default=false Displayed(tab/group)=Log (/Properties) |
| portType |
The Port Type.
type=sitesec.MafPortType default=any Displayed(tab/group)=Source Port Type (/Properties) |
| protocol |
Protocol.
type=sitesec.Protocol default=ALL Displayed(tab/group)=Protocol (/Properties) |
| router |
type=string default= Displayed(tab/group)=Router (/Properties) |
| sourceIpAddress |
The Source IP Address.
type=InetAddress Displayed(tab/group)=Source IP (/Properties/Source IP) |
| sourceIpAddressMask |
The Source IP Address Mask
type=int minimum=0 maximum=32 Displayed(tab/group)=Source IP Mask (/Properties/Source IP) |
| sourcePort |
Source Port.
type=long default=0 minimum=0 maximum=65535 Displayed(tab/group)=Source Port (/Properties) |
| sourcePortMask |
Source Port Mask.
type=long default=65535 minimum=0 maximum=65535 Displayed(tab/group)=Source Port Mask (/Properties) |
| sourcePortName |
Source Port Name.
type=string default= minimum=0 maximum=30 Displayed(tab/group)=Source Port ID (/Properties) |
| srcIpPrefixListPointer |
type=Pointer default= Displayed(tab/group)=Source IP Prefix (/Properties/Source IP) |
| Overridden Properties | |
|---|---|
| id |
ID.
minimum=1 maximum=9999 |
| Properties inherited from policy.PolicyItemDefinition |
|---|
| containingPolicyDisplayedName, containingPolicyId |
| Properties inherited from policy.PolicyObject |
|---|
| description, displayedName, globalPolicy, id, isLocal, policyType, siteId, siteName, templateObject |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Methods |
|---|
deployer
: Deployer - the deployment state
synchronousDeploy
: boolean - (Optional) Specify whether to block until the changes have been fully deployed to the network. A value of "true" means to block. A value of "false" means to return immediately. Default: false (asynchronous)
clearOnDeployFailure
: boolean - (Optional) Specify whether to clear any failed deployers. A value of "true" means to clear. A value of "false" means to leave the failed deployer. Default: false
deployRetries
: int - (Optional) The number of times to attempt re-deployment during synchronous deployment. This parameter is meaningless in the asynchronous case. Default: 0
deployRetryInterval
: long - (Optional) The number of milliseconds to wait between deployment retries. This parameter is meaningless in the asynchronous case. Default: 0
taskDescription
: string - (Optional) A user friendly description of what the operation does. This information will be used by the task manager.
aInNewEntryFullName
: string -
aInOldEntryFullName
: string -
continueOnFailure
: continueOnFailure - (Optional) Continue processing requests in this stream if an exception occurs, unless the request is invalid. Default: false
sitesec.MafEntryBase.renumException
| Supported Network Elements | |
|---|---|
| 7450 ESS | |
| 7210 SAS M | |
| 7210 SAS X | |
| 7210 SAS E | |
| 7210 SAS D | |
| 7210 SAS K | |
| 7210 SAS T | |
| 7210 SAS Mxp | |
| 7210 SAS Dxp | |
| 7210 SAS S/Sx | |
| 7210 SAS R | |
| 7250 IXR | |
| 7750 SR | |
| 7705 SAR Gen 2 | |
| 7705 SAR Hm | |
| 7701 CPAA | |
| 7705 SAR | |
| 7705 SAR H | |
| 7705 SAR Hm | Supported from 20.7.R1 |
| DC VSC | |
| DC 7850 | |
| DC 210 | |
| DC VSA8 | |
| 7950 XRS | |
| Product Specifics | |
| 7450 ESS 20.0 | |
| 7450 ESS 21.0 | |
| 7450 ESS 22.0 | |
| 7450 ESS 23.0 | |
| 7450 ESS 24.0 | |
| 7450 ESS 25.0 | |