| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| action |
The value of 'action' specifies the action to be taken
when a packet matches the selection criteria configured in this
management access filter entry. Before a filter entry can be active,
'action' must be assigned some value other than 'none'.
The value denyHostUnreachable is not allowed for this object.
type=sitesec.MacMafAction default=none Displayed(tab/group)=Action (Filter Properties/Protocol) |
| cfmOpCodeOper |
The value of the object 'cfmOpCodeOper' specifies which
type of opcode checking is to be performed.
If different from none, more info is provided in the objects
cfmOpCodeValue1 and cfmOpCodeValue2
This object has significance only if the object frameType
refers to either ieee802.1ag or Y1731.
type=acl.Operator default=0 Displayed(tab/group)=CFM Opcode (Filter Properties/CFM Opcode) |
| cfmOpCodeValue1 |
The value of the object 'cfmOpCodeValue1' specifies a cfm
opcode. The value of this object is used as per the
description for cfmOpCodeOper.
type=int default=0 minimum=0 maximum=255 Displayed(tab/group)=CFM Val 1 (Filter Properties/CFM Opcode) |
| cfmOpCodeValue2 |
The value of the object 'cfmOpCodeValue2' specifies a cfm
opcode. The value of this object is used as per the
description for cfmOpCodeOper.
type=int default=0 minimum=0 maximum=255 Displayed(tab/group)=CFM Val 2 (Filter Properties/CFM Opcode) |
| count |
The value of 'count' indicates the number of times
a management packet has matched this filter entry.
type=long access=read-only |
| dot1pMask |
The value of the object 'dot1pMask' specifies
the IEEE 802.1p priority mask value for this policy MAC filter entry.
Use zero to disable matching, use 7 to match everything.
type=qos.Dot1pValueNoDefaultEnum default=0 Displayed(tab/group)=Dot1p Mask (Filter Properties/Match Criteria) |
| dot1pValue |
The value of the object 'dot1pValue' specifies
the IEEE 802.1p priority value for this MAC filter entry.
Use -1 to disable matching this filter criteria.
type=acl.Dot1pPriority default=default Displayed(tab/group)=Dot1p (Filter Properties/Match Criteria) |
| dsap |
The value of the object 'dsap' specifies the MAC DSAP
to match for this MAC filter entry. This object has no
significance if the object frameType is not set to
802dot2LLC.
type=int default=-1 minimum=-1 maximum=255 Displayed(tab/group)=DSAP (Filter Properties/Match Criteria - DSAP SSAP) |
| dsapMask |
The value of the object 'dsapMask' specifies the
MAC DSAP mask for this MAC filter entry.
This object has no significance if the object
frameType is not set to 802dot2LLC.
type=int default=-1 minimum=-1 maximum=255 Displayed(tab/group)=DSAP Mask (Filter Properties/Match Criteria - DSAP SSAP) |
| dstMAC |
The value of the object 'dstMAC' specifies
the destination MAC mask value for this policy MAC filter entry.
type=MacAddress default=00-00-00-00-00-00 Displayed(tab/group)=Destination MAC (Filter Properties/Match Criteria) |
| dstMACMask |
The value of the object dstMACMask specifies
the destination MAC mask value for this policy MAC filter entry.
The mask is ANDed with the MAC to match dstMAC
A zero bit means ignore this bit, do not match. a one bit means
match this bit with dstMAC.
Use the value 00-00-00-00-00-00 to disable this filter criteria.
type=MacAddress default=00-00-00-00-00-00 Displayed(tab/group)=Dst Mask (Filter Properties/Match Criteria) |
| etherType |
The value of the object 'etherType' specifies the
Ethertype for this MAC filter entry. Use -1 to disable matching
by this criteria. This object has no significance if the object
frameType is not set to Ethernet_II.
type=int default=-1 minimum=-1 maximum=65535 Displayed(tab/group)=Ether Type (Filter Properties/Match Criteria - Ethernet II) |
| frameType |
The value of 'frametype' specifies the type of
MAC frame for which we are defining this match criteria.
type=sitesec.MafFrameType default=e802dot3 Displayed(tab/group)=Frame Type (Filter Properties/Protocol) |
| log |
The value of the object 'log' specifies whether or not
logging is active for this filter entry.
type=boolean default=false |
| policyTypeMac |
Policy Type.
type=string access=read-only default=Mac Maf Filter Displayed(tab/group)=Policy Type |
| snapOui |
Specifies an IEEE 802.3 LLC subnetwork access protocol (SNAP) Ethernet frame OUI zero or non-zero value that is applied as a MAC filter match criterion in an NE CPM or MAF.
Zero specifies that packets with the three-byte SNAP OUI field in the SNAP ID set to zero must be matched.
Non Zero specifies that packets with the three-byte SNAP OUI field in the SNAP-ID not set to zero must be matched.
type=acl.SnapOuiValue default=off Displayed(tab/group)=SNAP OUI (Filter Properties/Match Criteria - SNAP) |
| snapPid |
Specifies an IEEE 802.3 LLC subnetwork access protocol Ethernet frame ID value that is applied as a MAC filter match criterion in an NE CPM or management access filter.
The range is -1 to 65 535. The default is -1.
type=int default=-1 minimum=-1 maximum=65535 Displayed(tab/group)=SNAP PID (Filter Properties/Match Criteria - SNAP) |
| srcMAC |
The value of the object 'srcMAC' specifies
the source MAC to match for this policy MAC filter entry.
type=MacAddress default=00-00-00-00-00-00 Displayed(tab/group)=Source MAC (Filter Properties/Match Criteria) |
| srcMACMask |
The value of the object 'srcMACMask' specifies
the source MAC mask value for this policy MAC filter entry.
The mask is ANDed with the MAC to match srcMAC
A zero bit means ignore this bit, do not match. A one bit means
match this bit with srcMAC
Use the value 00-00-00-00-00-00 to disable this filter criteria.
type=MacAddress default=00-00-00-00-00-00 Displayed(tab/group)=Src Mask (Filter Properties/Match Criteria) |
| ssap |
The value of the object 'ssap' specifies the
the MAC SSAP to match for this MAC filter entry. This object has no
significance if the object frameType is not set to
802dot2LLC.
type=int default=-1 minimum=-1 maximum=255 Displayed(tab/group)=SSAP (Filter Properties/Match Criteria - DSAP SSAP) |
| ssapMask |
The value of the object 'ssapMask' specifies the
MAC SSAP mask for this MAC filter entry. use 0 to disable
matching by this criteria. This object has no significance if the
object frameType is not set to 802dot2LLC.
type=int default=-1 minimum=-1 maximum=255 Displayed(tab/group)=SSAP Mask (Filter Properties/Match Criteria - DSAP SSAP) |
| svcId |
The value of the 'svcId' specifies the service-id
in which the packet is to be received for this entry to match.
A value of 0 indicates: any service.
type=long default=0 minimum=0 maximum=2147483647 Displayed(tab/group)=Service Id (Filter Properties/Service Id) |
| Overridden Properties | |
|---|---|
| id |
ID.
minimum=1 maximum=9999 |
| Properties inherited from policy.PolicyItemDefinition |
|---|
| containingPolicyDisplayedName, containingPolicyId |
| Properties inherited from policy.PolicyObject |
|---|
| description, displayedName, globalPolicy, id, isLocal, policyType, siteId, siteName, templateObject |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Methods |
|---|
deployer
: Deployer - the deployment state
synchronousDeploy
: boolean - (Optional) Specify whether to block until the changes have been fully deployed to the network. A value of "true" means to block. A value of "false" means to return immediately. Default: false (asynchronous)
clearOnDeployFailure
: boolean - (Optional) Specify whether to clear any failed deployers. A value of "true" means to clear. A value of "false" means to leave the failed deployer. Default: false
deployRetries
: int - (Optional) The number of times to attempt re-deployment during synchronous deployment. This parameter is meaningless in the asynchronous case. Default: 0
deployRetryInterval
: long - (Optional) The number of milliseconds to wait between deployment retries. This parameter is meaningless in the asynchronous case. Default: 0
taskDescription
: string - (Optional) A user friendly description of what the operation does. This information will be used by the task manager.
aInNewEntryFullName
: string -
aInOldEntryFullName
: string -
continueOnFailure
: continueOnFailure - (Optional) Continue processing requests in this stream if an exception occurs, unless the request is invalid. Default: false
sitesec.MacMafEntry.renumException
| Supported Network Elements | |
|---|---|
| 7450 ESS | |
| 7210 SAS M | |
| 7210 SAS X | |
| 7210 SAS E | |
| 7210 SAS D | |
| 7210 SAS K | |
| 7210 SAS T | |
| 7210 SAS Mxp | |
| 7210 SAS Dxp | |
| 7210 SAS S/Sx | |
| 7210 SAS R | |
| 7750 SR | |
| 7705 SAR Gen 2 | |
| 7705 SAR Hm | |
| 7701 CPAA | |
| 7705 SAR | |
| 7705 SAR H | |
| DC VSC | |
| DC 7850 | |
| DC 210 | |
| DC VSA8 | |
| 7950 XRS | |
| Product Specifics | |
| 7450 ESS 20.0 | |
| 7450 ESS 21.0 | |
| 7450 ESS 22.0 | |
| 7450 ESS 23.0 | |
| 7450 ESS 24.0 | |
| 7450 ESS 25.0 | |
| 7705 SAR Gen 2 (all versions) | |
| 7705 SAR Gen 2 25.0 | |
| 7750 SR 20.0 | |
| 7750 SR 21.0 | |
| 7750 SR 22.0 | |
| 7750 SR 23.0 | |
| 7750 SR 24.0 | |
| 7750 SR 25.0 | |
| 7950 XRS 20.0 | |
| 7950 XRS 21.0 | |
| 7950 XRS 22.0 | |
| 7950 XRS 23.0 | |
| 7950 XRS 24.0 | |
| 7950 XRS 25.0 | |