| Overview | Package | Class | Deprecated | Help |
| Values | |
|---|---|
| svcMtuMismatch |
value=0x1 bit number=0 displayed=Service MTU Mismatch As of release 6.0 this flag is deprecated for all types of services. Use bits 'sdpBindingDown' and 'siteDown' instead. |
| missingSdpBinding |
value=0x2 bit number=1 displayed=Missing SDP Binding(s) As of release 6.0 this flag is deprecated for all types of services. This flag indicates that there is no full connectivity in a given service. As of release 4.0 this flag is not supported for VPLS and Management-VPLS services (since the calculation of this flag could be incorrect if there is a Spoke SDP Binding between two sites of the same (M)VPLS service). applicable for: mirror.Mirror vll.Vll |
| siteDown |
value=0x4 bit number=2 displayed=Site(s) Down This flag indicates that at least one service site within the service is operationally down. |
| sdpBindingDown |
value=0x8 bit number=3 displayed=SDP Binding(s) Down This flag indicates that at least one SDP Binding within the service is operationally down. Check the SDP Binding's operational flags for more details on the problem. |
| oamValidationFailed |
value=0x10 bit number=4 displayed=OAM Validation Failed This bit is set when the last execution of the SAS validator associated with the service returned with test failed result. This bit is cleared 1) if the SAS validator returned with success result, or 2) the SAS validator was never executed, or 3) there is no SAS validator associated with the given service. Note that a SAS validator may or may not be associated with the given service (since it not mandatory to have SAS validator for a service). There can be up to 1 SAS validator associated with a service. |
| monitoredAccessInterfaceDown |
value=0x20 bit number=5 displayed=Monitored Access(es) Down This flag indicates that at least one monitored access interface is operationally down. Only monitored access interfaces are considered (only access interfaces on service sites with access interface operational status monitoring enabled). In order to "monitor" access interfaces the "monitorAccessInterfaceOper" property of the containing service Site must be set to 'true'. |
| bgpAdVplsIdInconsistent |
value=0x40 bit number=6 displayed=BGP AD VPLS ID Inconsistent This flag indicates that the VPLS ID on the BgpAdSite level is different from the VPLS ID on the parent (service site) level. This is caused by changes to BGP-AD VPLS ID after the service site has been created. applicable for: vpls.Vpls |
| bvplsSiteDown |
value=0x80 bit number=7 displayed=B-VPLS Site Down This flag indicates that the B-VPLS site which I-VPLS/EPIPE site bound to is operational down. applicable for: vpls.Vpls mvpls.Mvpls epipe.Epipe vpls.AbstractVpls |
| isidInconsistent |
value=0x100 bit number=8 displayed=ISID Inconsistent This flag indicates that the I-VPLS sites or EPIPE sites are using inconsistent ISID. applicable for: vpls.Vpls mvpls.Mvpls epipe.Epipe vpls.AbstractVpls |
| customerIdInconsistent |
value=0x200 bit number=9 displayed=Customer ID Inconsistent This flag indicates that the customer IDs on sites of this service are inconsistent. This could happen after the user fix the service membership problem using NFM-P service audit tool. This flag applies to VPLS, VLL and VPRN services since SAM 7.0. applicable for: vpls.Vpls mvpls.Mvpls epipe.Epipe vpls.AbstractVpls vprn.Vprn apipe.Apipe fpipe.Fpipe hpipe.Hpipe cpipe.Cpipe ipipe.Ipipe vll.Vll |
| serviceIdInconsistent |
value=0x400 bit number=10 displayed=Service ID Inconsistent This flag indicates that the service IDs on sites of this service are inconsistent. This could happen after the user fix the service membership problem using NFM-P service audit tool. This flag applies to VPLS, VLL and VPRN services since SAM 7.0. applicable for: vpls.Vpls mvpls.Mvpls epipe.Epipe vpls.AbstractVpls vprn.Vprn apipe.Apipe fpipe.Fpipe hpipe.Hpipe cpipe.Cpipe ipipe.Ipipe vll.Vll |
| forceQTagForwardingInconsistent |
value=0x1000 bit number=12 displayed=Force Q Tag Forwarding Inconsistent This flag indicates that the I-VPLS sites or EPIPE sites are using inconsistent Force Q Tag Forwarding. applicable for: vpls.Vpls mvpls.Mvpls epipe.Epipe vpls.AbstractVpls |
| encapTypeOrValueMismatch |
value=0x2000 bit number=13 displayed=VLAN Uplink(s) Down/Not present This flag indicates that the VlanUplink Object is Created Successfully or not applicable for: vpls.Vpls mvpls.Mvpls epipe.Epipe vpls.AbstractVpls |
| insufficientBandwidth |
value=0x4000 bit number=14 displayed=Insufficient Bandwidth This indicates insufficient bandwidth on the radio link(s) used by this service. applicable for: mpr.BackhaulService |
| adjacencyDown |
value=0x8000 bit number=15 displayed=Adjacency Down This flag indicates that operational status of the Backhaul Adjacencies on the Backhaul Sites. applicable for: mpr.BackhaulService |
| portsSegregated |
value=0x10000 bit number=16 displayed=Ports Segregated This indicates that the ports used for creating cross connect by this service are segregated. applicable for: mpr.BackhaulService |
| ringDown |
value=0x20000 bit number=17 displayed=Ring Down This indicates that the at least one ring within the service is down. applicable for: mpr.BackhaulService |
| adjacencyNotDeployed |
value=0x40000 bit number=18 displayed=Adjacency Not Deployed This flag indicates that deployment status of the Backhaul Adjacencies on the Backhaul Sites. applicable for: mpr.BackhaulService |
| topologyMisconfigured |
value=0x80000 bit number=19 displayed=Topology Misconfigured This flag indicates that topology is misconfigured for the Backhaul Service. applicable for: mpr.BackhaulService |