Overview Package Class Deprecated Help

service
Y1564ServiceTest

This class represents Y1564 Service test.

public class Y1564ServiceTest

Stats:
service.Y1564ServiceTestStats

Properties
cirTestDuration Specifies the cir test duration

type=long
default=300
minimum=0
cirTestDurationMins Specifies the number of minutes in the cir test duration

type=int
default=5
minimum=0
maximum=60
units=Min
Displayed(tab/group)=CIR Minutes (/Test Durations)
cirTestDurationSecs Specifies the number of seconds in the cir test duration

type=int
default=0
minimum=0
maximum=60
units=Sec
Displayed(tab/group)=CIR Seconds (/Test Durations)
cirpirTestDuration Specifies the cir-pir performance duration

type=long
default=600
minimum=0
cirpirTestDurationMins Specifies the number of minutes in the cir-pir test duration

type=int
default=10
minimum=0
maximum=60
units=Min
Displayed(tab/group)=CIR-PIR Minutes (/Test Durations)
cirpirTestDurationSecs Specifies the number of seconds in the cir-pir test duration

type=int
default=0
minimum=0
maximum=60
units=Sec
Displayed(tab/group)=CIR-PIR Seconds (/Test Durations)
performanceTestDuration Specifies the performance test duration

type=long
default=900
minimum=0
performanceTestDurationHours Specifies the number of hours in the performance test duration

type=int
default=0
minimum=0
maximum=24
units=Hr
Displayed(tab/group)=Performance Hours (/Test Durations)
performanceTestDurationMins Specifies the number of minutes in the performance test duration

type=int
default=15
minimum=0
maximum=60
units=Min
Displayed(tab/group)=Performance Minutes (/Test Durations)
performanceTestDurationSecs Specifies the number of seconds in the performance test duration

type=int
default=0
minimum=0
maximum=60
units=Sec
Displayed(tab/group)=Performance Seconds (/Test Durations)
policingTestDuration Specifies the cir policing duration

type=long
default=600
minimum=0
policingTestDurationMins Specifies the number of minutes in the policing test duration

type=int
default=10
minimum=0
maximum=60
units=Min
Displayed(tab/group)=Policing Minutes (/Test Durations)
policingTestDurationSecs Specifies the number of seconds in the policing test duration

type=int
default=0
minimum=0
maximum=60
units=Sec
Displayed(tab/group)=Policing Seconds (/Test Durations)
runOperState The value of tmnxOamSathCfgSvcTestRunOprState specifies the operational state of the service test. none(1) indicates there is no currently active run for this service test. running(2) indicates there is a currently active run for this service test. start(3) requests a run be started for this service test. stop(4) requests the currently active run for this service test be stopped. The following table specifies: a) if the code point can be returned by snmpget, and b) if snmpset can be used to change the value to the specified code point. Code Point snmpget snmpset -------------------------- 'none (1)' Y N 'running(2)' Y N 'start (3)' N Y 'stop (4)' N Y

type=service.RunOperationalState
access=read-only
default=none
Displayed(tab/group)=Run Operational State
service.Y1564ServiceTestStream-Set type=Children-Set
streamOrder Specifies whether tests are executed sequentially by stream ID or concurrently for all streams. Tests always execute in order by test type (CIR, CIR-PIR, Policing, Performance). When Ordered is selected, tests are executed in sequence by test type, but within each test type they execute in numerical order by stream ID. For example, all CIR tests are executed, beginning with the test configured in stream 1, then stream 2, and so on. Then all CIR-PIR tests are executed, again beginning with the lowest-numbered stream ID. When Parallel is selected, tests are executed in sequence by test type, but for each test type, the tests are executed concurrently for all streams.

type=service.StreamOrder
default=sequential
Displayed(tab/group)=Stream Order
testName Uniquely identifies each Service Activation TestHead Service Test

type=string
testRunId

type=long
default=0
minimum=0
  
Properties inherited from service.Y1564Test
accountingPolicyId, accountingPolicyObjectPointer, administrativeState, aggregatedWith, applicationId, description, displayedName, enableTestCompletionTrap, id, lastGeneratedTime, publishTopic, siteId, sitePointer, startStopTest, testDefinition, testId, testPolicyUsage, testResultStorage, testSuite, testSuiteId, testSuiteTestedEntity, testedEntityName, testedObject
 
Properties inherited from sas.AbstractTest
administrativeState, description, displayedName, failures, globalId, id, lastRunResult, runs, weight
 
Properties inherited from ManagedObject
actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed
 
Methods inherited from service.Y1564Test
stopTest
 
Methods inherited from sas.AbstractTest
execute, stop
 
Supported Network Elements
7210 SAS K Supported from 10.0.R1
7210 SAS Dxp Supported from 23.3.R1
7250 IXR Supported from 21.5.R1
7750 SR Supported from 23.10.R1
7950 XRS Supported from 23.10.R1
7450 ESS Supported from 23.10.R1
Product Specifics
7210 SAS Dxp 23.0
7210 SAS Dxp 24.0
7210 SAS Dxp 25.0
7210 SAS K 20.0
7210 SAS K 21.0
7210 SAS K 22.0
7210 SAS K 23.0
7210 SAS K 24.0
7210 SAS K 25.0
7250 IXR 21.0
7250 IXR 22.0
7250 IXR 23.0
7250 IXR 24.0
7250 IXR 25.0
7450 ESS 23.0
7450 ESS 24.0
7450 ESS 25.0
7750 SR 23.0
7750 SR 24.0
7750 SR 25.0
7950 XRS 23.0
7950 XRS 24.0
7950 XRS 25.0