|
Properties |
|
cemStatsEgressDroppedPktsPeriodicThreshold |
The value of sapCemStatsEgressDroppedPkts indicates
the total number of packets that were dropped due to
errors.
type=long
access=read-only
default=0
|
|
cemStatsEgressDroppedPktsPeriodicThresholdEnabled |
type=boolean
access=read-only
default=false
|
|
cemStatsEgressESsPeriodicThreshold |
The value of sapCemStatsEgressESs indicates the number of
Error Seconds (ESs) encountered. Any malformed packet,
seq. error, LOPS and similar are considered as error
seconds.
type=long
access=read-only
default=0
|
|
cemStatsEgressESsPeriodicThresholdEnabled |
type=boolean
access=read-only
default=false
|
|
cemStatsEgressFailureCountsPeriodicThreshold |
The value of sapCemStatsEgressFailureCount indicates
the number failure events. A failure event begins when
the LOPS failure is declared, and ends when the failure
is cleared.
type=long
access=read-only
default=0
|
|
cemStatsEgressFailureCountsPeriodicThresholdEnabled |
type=boolean
access=read-only
default=false
|
|
cemStatsEgressForwardedPktsPeriodicThreshold |
The value of sapCemStatsEgressForwardedPkts indicates the
number of packets that were successfully forwarded.
type=long
access=read-only
default=0
|
|
cemStatsEgressForwardedPktsPeriodicThresholdEnabled |
type=boolean
access=read-only
default=false
|
|
cemStatsEgressJtrBfrDepthPeriodicThreshold |
The value of sapCemStatsEgressJtrBfrDepth indicates
the current packet depth of the jitter buffer.
type=long
access=read-only
default=0
|
|
cemStatsEgressJtrBfrDepthPeriodicThresholdEnabled |
type=boolean
access=read-only
default=false
|
|
cemStatsEgressJtrBfrOverrunsPeriodicThreshold |
The value of sapCemStatsEgressJtrBfrOverruns indicates
the number of times a packet was dropped because it could
not fit in the jitter buffer.
type=long
access=read-only
default=0
|
|
cemStatsEgressJtrBfrOverrunsPeriodicThresholdEnabled |
type=boolean
access=read-only
default=false
|
|
cemStatsEgressJtrBfrUnderrunsPeriodicThreshold |
The value of sapCemStatsEgressJtrBfrUnderruns
indicates the number of times a packet needed to be played
out and the jitter buffer was empty.
type=long
access=read-only
default=0
|
|
cemStatsEgressJtrBfrUnderrunsPeriodicThresholdEnabled |
type=boolean
access=read-only
default=false
|
|
cemStatsEgressLBitDroppedPeriodicThreshold |
The value of sapCemStatsEgressLBitDropped indicates the
number of packets dropped due to the L bit set by the far
end.
type=long
access=read-only
default=0
|
|
cemStatsEgressLBitDroppedPeriodicThresholdEnabled |
type=boolean
access=read-only
default=false
|
|
cemStatsEgressMalformedPktsPeriodicThreshold |
The value of sapCemStatsEgressMalformedPkts indicates the
number of packets detected with unexpected size, or bad
headers' stack.
type=long
access=read-only
default=0
|
|
cemStatsEgressMalformedPktsPeriodicThresholdEnabled |
type=boolean
access=read-only
default=false
|
|
cemStatsEgressMisOrderDroppedPeriodicThreshold |
The value of sapCemStatsEgressMisOrderDropped indicates
the number of packets detected out of order(via control
word sequence numbers), and could not be re-ordered, or
could not fit in the jitter buffer.
type=long
access=read-only
default=0
|
|
cemStatsEgressMisOrderDroppedPeriodicThresholdEnabled |
type=boolean
access=read-only
default=false
|
|
cemStatsEgressMissingPktsPeriodicThreshold |
The value of sapCemStatsEgressMissingPkts indicates the
number of missing packets (as detected via control word
sequence number gaps).
type=long
access=read-only
default=0
|
|
cemStatsEgressMissingPktsPeriodicThresholdEnabled |
type=boolean
access=read-only
default=false
|
|
cemStatsEgressMultipleDroppedPeriodicThreshold |
The value of sapCemStatsEgressMultipleDropped indicates
the number of packets dropped due to multiple sequence
numbers.
type=long
access=read-only
default=0
|
|
cemStatsEgressMultipleDroppedPeriodicThresholdEnabled |
type=boolean
access=read-only
default=false
|
|
cemStatsEgressOverrunCountsPeriodicThreshold |
The value of sapCemStatsEgressOverrunCount indicates
the number of times the jitter buffer went into an
overrun state.
type=long
access=read-only
default=0
|
|
cemStatsEgressOverrunCountsPeriodicThresholdEnabled |
type=boolean
access=read-only
default=false
|
|
cemStatsEgressPktsReOrderPeriodicThreshold |
The value of sapCemStatsEgressPktsReOrder indicates the
number of packets detected out of sequence (via control
word sequence number), but successfully re-ordered.
type=long
access=read-only
default=0
|
|
cemStatsEgressPktsReOrderPeriodicThresholdEnabled |
type=boolean
access=read-only
default=false
|
|
cemStatsEgressSESsPeriodicThreshold |
The value of sapCemStatsEgressSESs indicates the number
of Severely Error Seconds (SESs) encountered. This is
when more than 30 percent of the packets within a one
second window are missing.
type=long
access=read-only
default=0
|
|
cemStatsEgressSESsPeriodicThresholdEnabled |
type=boolean
access=read-only
default=false
|
|
cemStatsEgressUASsPeriodicThreshold |
The value of sapCemStatsEgressUASs indicates the number of
Unavailable Seconds (UASs) encountered. Any consecutive
ten seconds of SESs are counted as one UAS.
type=long
access=read-only
default=0
|
|
cemStatsEgressUASsPeriodicThresholdEnabled |
type=boolean
access=read-only
default=false
|
|
cemStatsEgressUnderrunCountsPeriodicThreshold |
The value of sapCemStatsEgressUnderrunCount indicates
the number of times the jitter buffer went into an
underrun state.
type=long
access=read-only
default=0
|
|
cemStatsEgressUnderrunCountsPeriodicThresholdEnabled |
type=boolean
access=read-only
default=false
|
|
cemStatsIngressDroppedPktsPeriodicThreshold |
The value of sapCemStatsIngressDroppedPkts indicates
the number of packets that were dropped due to errors.
type=long
access=read-only
default=0
|
|
cemStatsIngressDroppedPktsPeriodicThresholdEnabled |
type=boolean
access=read-only
default=false
|
|
cemStatsIngressForwardedPktsPeriodicThreshold |
The value of sapCemStatsIngressForwardedPkts indicates
the number of packets that were successfully forwarded.
type=long
access=read-only
default=0
|
|
cemStatsIngressForwardedPktsPeriodicThresholdEnabled |
type=boolean
access=read-only
default=false
|