Overview Package Class Deprecated Help

service
CemSapStats

This in effect extends the sapBaseInfoTable with additional columns. Rows are created in the sapCemStatsTable only for those entries in the sapBaseInfoTable that are created on a port that 'cemEncap' set for port encapsulation.

public class CemSapStats

Stats For:
service.L2AccessInterface

Properties
cemStatsEgressDroppedPkts The value of sapCemStatsEgressDroppedPkts indicates the total number of packets that were dropped due to errors.

type=long
access=read-only
default=0
cemStatsEgressDroppedPktsPeriodic The value of sapCemStatsEgressDroppedPkts indicates the total number of packets that were dropped due to errors.

type=long
access=read-only
default=0
cemStatsEgressESs The value of sapCemStatsEgressESs indicates the number of Error Seconds (ESs) encountered. Any malformed packet, seq. error, LOPS and similar are considered as error seconds.

type=long
access=read-only
default=0
cemStatsEgressESsPeriodic The value of sapCemStatsEgressESs indicates the number of Error Seconds (ESs) encountered. Any malformed packet, seq. error, LOPS and similar are considered as error seconds.

type=long
access=read-only
default=0
cemStatsEgressFailureCounts The value of sapCemStatsEgressFailureCount indicates the number failure events. A failure event begins when the LOPS failure is declared, and ends when the failure is cleared.

type=long
access=read-only
default=0
cemStatsEgressFailureCountsPeriodic The value of sapCemStatsEgressFailureCount indicates the number failure events. A failure event begins when the LOPS failure is declared, and ends when the failure is cleared.

type=long
access=read-only
default=0
cemStatsEgressForwardedPkts The value of sapCemStatsEgressForwardedPkts indicates the number of packets that were successfully forwarded.

type=long
access=read-only
default=0
cemStatsEgressForwardedPktsPeriodic The value of sapCemStatsEgressForwardedPkts indicates the number of packets that were successfully forwarded.

type=long
access=read-only
default=0
cemStatsEgressJtrBfrDepth The value of sapCemStatsEgressJtrBfrDepth indicates the current packet depth of the jitter buffer.

type=long
access=read-only
default=0
cemStatsEgressJtrBfrDepthPeriodic The value of sapCemStatsEgressJtrBfrDepth indicates the current packet depth of the jitter buffer.

type=long
access=read-only
default=0
cemStatsEgressJtrBfrOverruns The value of sapCemStatsEgressJtrBfrOverruns indicates the number of times a packet was dropped because it could not fit in the jitter buffer.

type=long
access=read-only
default=0
cemStatsEgressJtrBfrOverrunsPeriodic The value of sapCemStatsEgressJtrBfrOverruns indicates the number of times a packet was dropped because it could not fit in the jitter buffer.

type=long
access=read-only
default=0
cemStatsEgressJtrBfrUnderruns The value of sapCemStatsEgressJtrBfrUnderruns indicates the number of times a packet needed to be played out and the jitter buffer was empty.

type=long
access=read-only
default=0
cemStatsEgressJtrBfrUnderrunsPeriodic The value of sapCemStatsEgressJtrBfrUnderruns indicates the number of times a packet needed to be played out and the jitter buffer was empty.

type=long
access=read-only
default=0
cemStatsEgressLBitDropped The value of sapCemStatsEgressLBitDropped indicates the number of packets dropped due to the L bit set by the far end.

type=long
access=read-only
default=0
cemStatsEgressLBitDroppedPeriodic The value of sapCemStatsEgressLBitDropped indicates the number of packets dropped due to the L bit set by the far end.

type=long
access=read-only
default=0
cemStatsEgressMalformedPkts The value of sapCemStatsEgressMalformedPkts indicates the number of packets detected with unexpected size, or bad headers' stack.

type=long
access=read-only
default=0
cemStatsEgressMalformedPktsPeriodic The value of sapCemStatsEgressMalformedPkts indicates the number of packets detected with unexpected size, or bad headers' stack.

type=long
access=read-only
default=0
cemStatsEgressMisOrderDropped The value of sapCemStatsEgressMisOrderDropped indicates the number of packets detected out of order(via control word sequence numbers), and could not be re-ordered, or could not fit in the jitter buffer.

type=long
access=read-only
default=0
cemStatsEgressMisOrderDroppedPeriodic The value of sapCemStatsEgressMisOrderDropped indicates the number of packets detected out of order(via control word sequence numbers), and could not be re-ordered, or could not fit in the jitter buffer.

type=long
access=read-only
default=0
cemStatsEgressMissingPkts The value of sapCemStatsEgressMissingPkts indicates the number of missing packets (as detected via control word sequence number gaps).

type=long
access=read-only
default=0
cemStatsEgressMissingPktsPeriodic The value of sapCemStatsEgressMissingPkts indicates the number of missing packets (as detected via control word sequence number gaps).

type=long
access=read-only
default=0
cemStatsEgressMultipleDropped The value of sapCemStatsEgressMultipleDropped indicates the number of packets dropped due to multiple sequence numbers.

type=long
access=read-only
default=0
cemStatsEgressMultipleDroppedPeriodic The value of sapCemStatsEgressMultipleDropped indicates the number of packets dropped due to multiple sequence numbers.

type=long
access=read-only
default=0
cemStatsEgressOverrunCounts The value of sapCemStatsEgressOverrunCount indicates the number of times the jitter buffer went into an overrun state.

type=long
access=read-only
default=0
cemStatsEgressOverrunCountsPeriodic The value of sapCemStatsEgressOverrunCount indicates the number of times the jitter buffer went into an overrun state.

type=long
access=read-only
default=0
cemStatsEgressPktsReOrder The value of sapCemStatsEgressPktsReOrder indicates the number of packets detected out of sequence (via control word sequence number), but successfully re-ordered.

type=long
access=read-only
default=0
cemStatsEgressPktsReOrderPeriodic The value of sapCemStatsEgressPktsReOrder indicates the number of packets detected out of sequence (via control word sequence number), but successfully re-ordered.

type=long
access=read-only
default=0
cemStatsEgressSESs The value of sapCemStatsEgressSESs indicates the number of Severely Error Seconds (SESs) encountered. This is when more than 30 percent of the packets within a one second window are missing.

type=long
access=read-only
default=0
cemStatsEgressSESsPeriodic The value of sapCemStatsEgressSESs indicates the number of Severely Error Seconds (SESs) encountered. This is when more than 30 percent of the packets within a one second window are missing.

type=long
access=read-only
default=0
cemStatsEgressUASs The value of sapCemStatsEgressUASs indicates the number of Unavailable Seconds (UASs) encountered. Any consecutive ten seconds of SESs are counted as one UAS.

type=long
access=read-only
default=0
cemStatsEgressUASsPeriodic The value of sapCemStatsEgressUASs indicates the number of Unavailable Seconds (UASs) encountered. Any consecutive ten seconds of SESs are counted as one UAS.

type=long
access=read-only
default=0
cemStatsEgressUnderrunCounts The value of sapCemStatsEgressUnderrunCount indicates the number of times the jitter buffer went into an underrun state.

type=long
access=read-only
default=0
cemStatsEgressUnderrunCountsPeriodic The value of sapCemStatsEgressUnderrunCount indicates the number of times the jitter buffer went into an underrun state.

type=long
access=read-only
default=0
cemStatsIngressDroppedPkts The value of sapCemStatsIngressDroppedPkts indicates the number of packets that were dropped due to errors.

type=long
access=read-only
default=0
cemStatsIngressDroppedPktsPeriodic The value of sapCemStatsIngressDroppedPkts indicates the number of packets that were dropped due to errors.

type=long
access=read-only
default=0
cemStatsIngressForwardedPkts The value of sapCemStatsIngressForwardedPkts indicates the number of packets that were successfully forwarded.

type=long
access=read-only
default=0
cemStatsIngressForwardedPktsPeriodic The value of sapCemStatsIngressForwardedPkts indicates the number of packets that were successfully forwarded.

type=long
access=read-only
default=0
  
Properties inherited from log.CurrentData
alarmedObjectClass, alarmedObjectPointer, createdOnPollType, displayedName, historyCreated, logRecordClass, monitoredObjectClass, monitoredObjectPointer, monitoredObjectSiteId, monitoredObjectSiteName, periodicTime, suspect, timeCaptured, timeLogged, updatedOnPollType
 
Properties inherited from ManagedObject
actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed
 
Supporting MIBs
TIMETRA-SAP-MIB.sapCemStatsEntry 7450 ESS 11.0, 12.0, 13.0, 14.0, 15.0, 15.1, 16.0, 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7705 SAR 6.0, 6.1, 6.2, 7.0, 8.0, 9.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7705 SAR H 6.1, 6.2, 7.0, 8.0, 9.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS M 8.0, 9.0, 10.0, 11.0, 20.0, 21.0
7210 SAS Mxp 8.0, 9.0, 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS T 8.0, 9.0, 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7710 SR 12.0
7750 SR 12.0, 13.0, 14.0, 15.0, 15.1, 16.0, 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7250 IXR 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7705 SAR Gen 2 25.0
7705 SAR Hm 15.0, 16.0, 19.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
7210 SAS S/Sx 8.0, 9.0, 10.0, 11.0, 20.0, 21.0, 22.0, 23.0, 24.0, 25.0
Supported Network Elements
7750 SR
7705 SAR Gen 2
7705 SAR Hm
7705 SAR
7705 SAR H
7210 SAS M
7210 SAS T
7210 SAS Mxp
7210 SAS S/Sx
7450 ESS Supported from 8.0.R1 until 10.0.R1
  • Excluded chassis types: 7450-ESS1, 7450-ESS6, 7450-ESS6V
  • Required Capabilities: MixedMode
Supported from 10.0.R1
  • Excluded chassis types: 7450-ESS1
  • Required Capabilities: MixedMode
7250 IXR Supported from 19.10.R1