| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| deMark |
Specifies whether or not DE remarking is enabled.
type=generic.TruthValue default=false Displayed(tab/group)=Mark DE bit (/DE) |
| dot1pProfile |
Specifies the dot1p remarking value for all packets in the FC, when DE remarking is enabled.
type=qos.Dot1pValueEnum default=default Displayed(tab/group)=Dot1p (/Dot1p) |
| dscpInProfile |
type=qos.DscpEnum default=default Displayed(tab/group)=In Profile (/DSCP) |
| dscpOutProfile |
type=qos.DscpEnum default=default Displayed(tab/group)=Out Profile (/DSCP) |
| forceDeValue |
Specifies the DEI value for remarking. All packets in the FC are marked with the configured
value.
When the parameter is set to Default, the existing values for the packet are used.
type=qos.DEValue default=default Displayed(tab/group)=Force DE value (/DE) |
| forwardingClass |
type=qos.FcEnum access=read-create default=be Displayed(tab/group)=Forwarding Class |
| inDot1p |
The command will add the capability to mark on an egress the in and out profile status through a
certain dot1p combination. It may be used when the internal in and out of profile status needs
to be
communicated to an adjacent network/customer device that does not support the DEI bit.
type=qos.Dot1pValueEnum default=default Displayed(tab/group)=In Profile (/Dot1p) |
| outDot1p |
This command explicitly defines the egress IEEE 802.1P (dot1p) bits marking for fc-name. When
the marking is set, all packets of fc-name that have either an IEEE 802.1Q or IEEE 802.1P
encapsulation use the explicitly defined dot1p-value. If the egress packets for fc-name are not
IEEE 802.1Q or IEEE 802.1P encapsulated, the dot1p command has no effect.
type=qos.Dot1pValueEnum default=default Displayed(tab/group)=Out Profile (/Dot1p) |
| queueId |
type=int access=read-only default=1 minimum=1 maximum=8 Displayed(tab/group)=Queue ID |
| Properties inherited from policy.PolicyItemDefinition |
|---|
| containingPolicyDisplayedName, containingPolicyId |
| Properties inherited from policy.PolicyObject |
|---|
| description, displayedName, globalPolicy, id, isLocal, policyType, siteId, siteName, templateObject |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| 7210 SAS E | |
| 7210 SAS D | |
| 7210 SAS M | |
| 7210 SAS T |
Supported for all versions
|
| 7210 SAS Dxp | |
| Product Specifics | |
| 7210 SAS D 20.0.0 | |
| 7210 SAS D 21.0.0 | |
| 7210 SAS D 22.0.0 | |
| 7210 SAS D 23.0.0 | |
| 7210 SAS D 24.0.0 | |
| 7210 SAS D 25.0.0 | |