|
Overridden Properties |
|
queue1DropRate |
Specifies the RED slope drop rate for a queue, as the percentage of packets dropped in congested
conditions.
The Queue 1 Drop Rate parameter is configured in conjunction with the Start Threshold parameter,
which defines when congested conditions occur.
For example, when shared buffer utilization reaches the value specified by the Start Threshold
parameter, a
value of 100% for the drop rate means that 100% of the packets egressing from the queue are
dropped.
The low slope manages access to the shared portion of the buffer pool for low-priority or
out-of-profile packets.
default=DropRate0
|
|
queue2DropRate |
Specifies the RED slope drop rate for a queue, as the percentage of packets dropped in congested
conditions.
The Queue 1 Drop Rate parameter is configured in conjunction with the Start Threshold parameter,
which defines when congested conditions occur.
For example, when shared buffer utilization reaches the value specified by the Start Threshold
parameter, a
value of 100% for the drop rate means that 100% of the packets egressing from the queue are
dropped.
The low slope manages access to the shared portion of the buffer pool for low-priority or
out-of-profile packets.
default=DropRate0
|
|
queue3DropRate |
Specifies the RED slope drop rate for a queue, as the percentage of packets dropped in congested
conditions.
The Queue 1 Drop Rate parameter is configured in conjunction with the Start Threshold parameter,
which defines when congested conditions occur.
For example, when shared buffer utilization reaches the value specified by the Start Threshold
parameter, a
value of 100% for the drop rate means that 100% of the packets egressing from the queue are
dropped.
The low slope manages access to the shared portion of the buffer pool for low-priority or
out-of-profile packets.
default=DropRate0
|
|
queue4DropRate |
Specifies the RED slope drop rate for a queue, as the percentage of packets dropped in congested
conditions.
The Queue 1 Drop Rate parameter is configured in conjunction with the Start Threshold parameter,
which defines when congested conditions occur.
For example, when shared buffer utilization reaches the value specified by the Start Threshold
parameter, a
value of 100% for the drop rate means that 100% of the packets egressing from the queue are
dropped.
The low slope manages access to the shared portion of the buffer pool for low-priority or
out-of-profile packets.
default=DropRate0
|
|
queue5DropRate |
Specifies the RED slope drop rate for a queue, as the percentage of packets dropped in congested
conditions.
The Queue 1 Drop Rate parameter is configured in conjunction with the Start Threshold parameter,
which defines when congested conditions occur.
For example, when shared buffer utilization reaches the value specified by the Start Threshold
parameter, a
value of 100% for the drop rate means that 100% of the packets egressing from the queue are
dropped.
The low slope manages access to the shared portion of the buffer pool for low-priority or
out-of-profile packets.
default=DropRate0
|
|
queue6DropRate |
Specifies the RED slope drop rate for a queue, as the percentage of packets dropped in congested
conditions.
The Queue 1 Drop Rate parameter is configured in conjunction with the Start Threshold parameter,
which defines when congested conditions occur.
For example, when shared buffer utilization reaches the value specified by the Start Threshold
parameter, a
value of 100% for the drop rate means that 100% of the packets egressing from the queue are
dropped.
The low slope manages access to the shared portion of the buffer pool for low-priority or
out-of-profile packets.
default=DropRate0
|
|
queue7DropRate |
Specifies the RED slope drop rate for a queue, as the percentage of packets dropped in congested
conditions.
The Queue 1 Drop Rate parameter is configured in conjunction with the Start Threshold parameter,
which defines when congested conditions occur.
For example, when shared buffer utilization reaches the value specified by the Start Threshold
parameter, a
value of 100% for the drop rate means that 100% of the packets egressing from the queue are
dropped.
The low slope manages access to the shared portion of the buffer pool for low-priority or
out-of-profile packets.
default=DropRate0
|
|
queue8DropRate |
Specifies the RED slope drop rate for a queue, as the percentage of packets dropped in congested
conditions.
The Queue 1 Drop Rate parameter is configured in conjunction with the Start Threshold parameter,
which defines when congested conditions occur.
For example, when shared buffer utilization reaches the value specified by the Start Threshold
parameter, a
value of 100% for the drop rate means that 100% of the packets egressing from the queue are
dropped.
The low slope manages access to the shared portion of the buffer pool for low-priority or
out-of-profile packets.
default=DropRate0
|
|
startThreshold |
Specifies the low slope RED position for the shared buffer instantaneous utilization value when
the packet discard probability comes into effect.
The parameter value is expressed as a percentage of the shared buffer size.
default=50
|