| Overview | Package | Class | Deprecated | Help |
| Values | |
|---|---|
| notApplicable |
value=0 displayed=Not Applicable Not Applicable. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| responseReceived |
value=1 displayed=Response Received A response was received on the device to the OAM diagnostic performed. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| unknown |
value=2 displayed=Unknown The OAM diagnostic failed for an unknown reason. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| internalError |
value=3 displayed=Internal Error An internal error on the device caused the diagnostic to not be performed. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| maxConcurrentLimitReached |
value=4 displayed=Maximum Concurrent Operations Reached The device cannot perform the OAM diagnostics because there are too many OAM diagnostic operations already running. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| requestTimedOut |
value=5 displayed=Request Timed Out The OAM diagnostic could not be completed because no reply was received within the allocated timeout period. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| unknownOrigSdpId |
value=6 displayed=Unknown Originator SDP Indicates an invalid or non-existent originating service tunnel. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| downOrigSdpId |
value=7 displayed=Originator SDP Down The originating service tunnel is operationally down. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| requestTerminated |
value=8 displayed=Request Terminated The OAM diagnostic was canceled before the timeout or reply period was reached. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| invalidOriginatorId |
value=9 displayed=Invalid Originator ID The far-end device replied indicating that the originating ID was invalid. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| invalidResponderId |
value=10 displayed=Invalid Responder ID The far-end device replied with an invalid responding ID. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| unknownRespSdpId |
value=11 displayed=Unknown Responder SDP The far-end device replied with an invalid response service tunnel ID. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| downRespSdpId |
value=12 displayed=Responder SDP Down The responding service tunnel with the given ID is operationally or administratively down. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| invalidServiceId |
value=13 displayed=An invalid or non-existent service ID An invalid or non-existent service ID. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| invalidSdp |
value=14 displayed=Invalid SDP An invalid or non-existent service tunnel for the service. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| downServiceSdp |
value=15 displayed=Service SDP Down The service tunnel bound to the service is down. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| noServiceEgressLabel |
value=16 displayed=No Service Egress Label The egress label for the service does not exist. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| invalidHostAddress |
value=17 displayed=Invalid Host Address The IP address for the host is invalid, for example, in the case of a broadcast or multicast IP address. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| invalidMacAddress |
value=18 displayed=Invalid MAC Address The MAC address specified in the OAM diagnostic is invalid. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| invalidLspName |
value=19 displayed=Invalid LSP Name The LSP name specified in the OAM diagnostic is invalid. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| macIsLocal |
value=20 displayed=MAC Is Local The MAC address is the local SAP or device MAC address, not the MAC address of the downstream SAP or device, therefore the MAC ping or trace cannot be sent. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| farEndUnreachable |
value=21 displayed=Far End Unreachable No route is available to the far-end GRE service tunnel. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| downOriginatorId |
value=22 displayed=Originator Down The originating ping device is operationally down. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| downResponderId |
value=23 displayed=Responder Down The device responding to the ping is operationally down. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| changedResponderId |
value=24 displayed=Responder Changed The ID of the device responding to the ping has changed. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| downOrigSvcId |
value=25 displayed=Originating Service Down The originating service identified by the ID is operationally down. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| downRespSvcId |
value=26 displayed=Responding Service Down The service responding to the ping identified by the ID is operationally down. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| noServiceIngressLabel |
value=27 displayed=No Service Ingress Label The ingress label for the service does not exist. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| mismatchCustId |
value=28 displayed=Customer Mismatch The subscriber ID identified with the service differs from the originating device compared to the responding device. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| mismatchSvcType |
value=29 displayed=Service Type Mismatch The service type identified with the service differs from one device to another. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| mismatchSvcMtu |
value=30 displayed=Service MTU Mismatch The service MTU size associated with the service differs from the originating device compared to the responding device. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| mismatchSvcLabel |
value=31 displayed=Service Label Mismatch The service label identified with the service differs from the originating device compared to the responding device. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| noSdpBoundToSvc |
value=32 displayed=No SDP Bound to Service There is no service tunnel bound to the service. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| downOrigSdpBinding |
value=33 displayed=Origin SDP Binding Down The service tunnel associated with the originating device’s service is operationally down. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| invalidLspPathName |
value=34 displayed=Invalid LSP Path Name The LSP path name specified in the OAM diagnostic is invalid. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| noLspEndpointAddr |
value=35 displayed=No LSP Endpoint Address There is no LSP endpoint address specified in the OAM diagnostic. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| noActiveLspPath |
value=36 displayed=No Active LSP Path There is no active LSP path. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| downLspPath |
value=37 displayed=LSP Path Down The far end of the LSP is operationally down. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| invalidLspProtocol |
value=38 displayed=Invalid LSP Protocol The LSP protocol is not valid or is not supported. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| invalidLspLabel |
value=39 displayed=Invalid LSP Label The LSP label is invalid. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| routeIsLocal |
value=40 displayed=Route Is Local For a VPRN ping, the route is a local route. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| noRouteToDest |
value=41 displayed=No Route To Destination For a VPRN ping, there is no route available to the destination of the OAM diagnostic. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| localExtranetRoute |
value=42 displayed=Local Extranet Route For a VPRN ping, the route is a local extranet route. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| srcIpInBgpVpnRoute |
value=43 displayed=Source IP In BGP-VPN Router For a VPRN ping, the source IP address belongs to a BGP VPN route. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| srcIpInvalid |
value=44 displayed=Invalid Source IP For a VPRN ping, the source IP address is invalid or no route is available to the source IP address. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| bgpDaemonBusy |
value=45 displayed=BGP Daemon Busy For a VPRN trace, the BGP routing process is busy on the device, and VPRN route target information cannot be retrieved. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| mcastNotEnabled |
value=46 displayed=Multicast Not Enabled Multicast is not enabled on the device, so the diagnostic cannot be performed. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| mTraceNoSGFlow |
value=47 displayed=No (*,G)/(S,G) Flow No (*,G)/(S,G) flow on the router. Multicast trace cannot be initiated. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| mTraceSysIpNotCfg |
value=48 displayed=System IP Address Not Configured The system IP address is not configured. The address is required for a response to a multicast trace. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| noFwdEntryInMfib |
value=49 displayed=No Fwd Entry In MFIB No forwarding entry could be found for the specified source and destination addresses in the MFIB. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| dnsNameNotFound |
value=50 displayed=DNS Not Found The domain name specified in the dns query does not exist applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| noSocket |
value=51 displayed=Unable To Get Socket For icmp-ping, unable to get socket. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| socketOptVprnIdFail |
value=52 displayed=Unable To Set SO_VPRNID For icmp-ping, unable to set SO_VPRNID for socket. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| socketOptIfInexFail |
value=53 displayed=Unable To Set IP_IFINDEX For icmp-ping, unable to set IP_IFINDEX for socket. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| socketOptNextHopFail |
value=54 displayed=Unable To Set IP_NEXT_HOP For icmp-ping, unable to set IP_NEXT_HOP for socket. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| socketOptMtuDiscFail |
value=55 displayed=Unable To Set IP_MTU_DISC For icmp-ping, unable to set IP_MTU_DISC for socket. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| socketOptSndbufFail |
value=56 displayed=Unable To Set SO_SNDBUF For icmp-ping, unable to set SO_SNDBUF for socket. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| socketOptHdrincFail |
value=57 displayed=Unable To Set IP_HDRINCL For icmp-ping, unable to set IP_HDRINCL for socket. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| socketOptTosFail |
value=58 displayed=Unable To Set IP_TOS For icmp-ping, unable to set IP_TOS for socket. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| socketOptTtlFail |
value=59 displayed=Unable To Set IP_TTL For icmp-ping, unable to set IP_TTL for socket. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| bindSocketFailFail |
value=60 displayed=Unable To Bind Socket For icmp-ping, unable to bind socket. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| noRouteByIntf |
value=61 displayed=No Route To Destination Via Interface. For icmp-ping, no route to destination via the specified interface. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| noIntf |
value=62 displayed=No Interface Specified For icmp-ping, no interface specified. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| noLocalIp |
value=63 displayed=Unable To Find Local Address For icmp-ping, unable to find local ip address. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| sendtoFail |
value=64 displayed=sendto Function Failed For icmp-ping, sendto function failed. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| rcvdWrongType |
value=65 displayed=Received Packet of Wrong ICMP Type For icmp-ping, received packet of wrong icmp type. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| noDirectInterface |
value=66 displayed=No Direct Interface To Reach Destination For icmp-ping, no direct interface to reach destination. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| nexthopUnreachable |
value=67 displayed=Unable To Reach The Next-Hop For icmp-ping, unable to reach the next-hop. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| socketOptHwTimeStampFail |
value=68 displayed=Unable To Set IP_TIM_TIME For icmp-ping, unable to set IP_TIM_TIME for socket. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| noSpokeSdpInVll |
value=69 displayed=No Spoke SDP in VLL For vccv-ping, unable to find spoke-sdp given SdpId:vc-id applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| farEndVccvNotSupported |
value=70 displayed=VCCV Not Supported by Far End For vccv-ping, far end does not support the VCCV options. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| noVcEgressLabel |
value=71 displayed=No VC Egress Label For vccv-ping, no Vc egress label to send vccv-ping applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| socketOptIpSessionFail |
value=72 displayed=Unable To Set IP_SESSION for Socket For icmp-ping, unable to set IP_SESSION for socket. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| rcvdWrongSize |
value=73 displayed=Received Packet of Wrong Size For icmp-ping, received packet of wrong size. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| dnsLookupFail |
value=74 displayed=DNS lookup failed For icmp-ping, dns lookup failed. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| noIpv6SrcAddrOnIntf |
value=75 displayed=no IPV6 source on the interface For icmp-ping, no ipv6 source on the interface. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| multipathNotSupported |
value=76 displayed=Downstream node does not support multipath For lsp-trace, downstream NE does not support multipath. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| nextHopIfNameNotFound |
value=77 displayed=Given next-hop interface name not found For lsp-ping/trace, Given next-hop interface name not found. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| msPwInvalidReplyMode |
value=78 displayed=Switching node only supports IP reply type For vccv-ping, MS-PW switching NE supports ip-routed reply mode only. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| ancpNoAncpString |
value=79 displayed=Ancp No Ancp String ANCP string unknown to the system. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| ancpNoSubscriber |
value=80 displayed=No Subscriber Subscriber unknown to the system. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| ancpNoAncpStringForSubscriber |
value=81 displayed=No Ancp String For Subscriber Subscriber has no associated ANCP string. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| ancpNoAccessNodeforAncpString |
value=82 displayed=No Access Node for Ancp String No access NE is found for the given ANCP string. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| ancpNoAncpCapabilityNegotiated |
value=83 displayed=No Ancp Capability Negotiated ANCP capability not negotiated with the involved DSLAM. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| ancpOtherTestInProgress |
value=84 displayed=Other Test In Progress Another ANCP test is running for this ANCP string. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| ancpMaxNbrAncpTestsInProgress |
value=85 displayed=Max Number of Ancp Tests In Progress Maximum number of concurrent ANCP tests reached. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| spokeSdpOperDown |
value=86 displayed=Spoke SDP Oper Down For vccv-ping, spoke-sdp is operationally down. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| noMsPwVccvInReplyDir |
value=87 displayed=Switching node in MS-PW with no vccv support in echo reply direction Switching NE in MS-PW with no vccv support in echo reply direction. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| p2mpLspNameOrInstInvalid |
value=88 displayed=P2MP LSP name or instance provided is not valid P2MP LSP name or instance provided is not valid. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| p2mpLspS2LPathDown |
value=89 displayed=LSP path to S2L is down LSP path to S2L is down. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| p2mpLspS2LAddressInvalid |
value=90 displayed=One or more S2L address is not valid One or more S2L address is not valid. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| p2mpLspNotOperational |
value=91 displayed=P2MP LSP is operationally down P2MP LSP is operationally down. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| p2mpLspTrMultipleReplies |
value=92 displayed=Probe returned multiple responses. Result may be inconsistent Probe returned multiple responses. Result may be inconsistent. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| invalidMepId |
value=93 displayed=Invalid MepId The user-configured MEP identifier is not valid. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| multipleReplies |
value=94 displayed=More than one reply received,When one was expected More than one reply received, when one was expected. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| packetSizeTooBig |
value=95 displayed=Packet size too big Packet size is too big. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| gtpPingError |
value=96 displayed=General GTP Ping Error General GTP Ping Error. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| gtpPingRsrcUnavailable |
value=97 displayed=GTP Path management resource unavailable GTP Path management resource unavailable. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| gtpPingDupRequest |
value=98 displayed=Duplicate request for the same peer Duplicate request for the same peer. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| gtpPingCleanUpInProg |
value=99 displayed=GTP Path management clean up in progress GTP Path management clean up in progress. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| invalidInterface |
value=100 displayed=The egress interface specified does not exist The egress interface specified does not exist. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| p2mpLspNotFound |
value=101 displayed=The P2MP-LSP not found given LDP-ID or sender-address The P2MP-LSP not found given LDP-ID or sender-address. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| ethCfmSlmInLoss |
value=102 displayed=Synthetic Loss Measurement (SLM) probe lost in transit from far-end node to local agent Synthetic Loss Measurement (SLM) probe lost in transit from far-end node to local agent. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| ethCfmSlmOutLoss |
value=103 displayed=SLM probe lost on transmit from local agent to far-end node SLM probe lost on transmit from local agent to far-end node. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| ethCfmSlmUnacknowledged |
value=104 displayed=SLM probe lost but unable to identify loss reason SLM probe lost but unable to identify loss reason. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| spokeSdpFecNoBndFound |
value=105 displayed=Spoke-sdp-fec is invalid or has no associated SDP binding yet Spoke-sdp-fec is invalid or has no associated SDP binding yet. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| mtraceNotSupportedP2mp |
value=106 displayed=mtrace not supported when incoming interface is p2mp Mtrace not supported in base routing context when incoming interface is p2mp. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| useFec129Parameters |
value=107 displayed=specify FEC129 parameters for FEC129 PW instead of sdp-id:vc-id Specify FEC129 parameters for FEC129 PW instead of sdp-id:vc-id. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| dnsServerUnexpectedResponse |
value=108 displayed=nameserver unexpected response nameserver unexpected response. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| dnsServerResponseFormErr |
value=109 displayed=nameserver responded with FORMERR nameserver responded with FORMERR. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| dnsServerResponseServFail |
value=110 displayed=nameserver responded with SERVFAIL nameserver responded with SERVFAIL. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| dnsServerResponseNotImp |
value=111 displayed=nameserver responded with NOTIMP nameserver responded with NOTIMP. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| dnsServerResponseRefused |
value=112 displayed=nameserver responded with REFUSED nameserver responded with REFUSED. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| sendFailUndefinedServiceId |
value=113 displayed=The OAM test cannot be performed because the associated service does not exist The OAM test cannot be performed because the associated service does not exist. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| sendFailWrongServiceType |
value=114 displayed=The OAM test cannot be performed because the associated service is of the wrong type The OAM test cannot be performed because the associated service is of the wrong type. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| sendFailSubnettedService |
value=115 displayed=The OAM test cannot be performed on a service with a specified mac subnet length The OAM test cannot be performed on a service with a specified mac subnet length. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| invalidRespServiceId |
value=116 displayed=Invalid or non-existent responder Service-ID Invalid or non-existent responder Service-ID. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| adminDownOrigSdpBind |
value=117 displayed=SDP binding is administratively down on the originator side SDP binding is administratively down on the originator side. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| operDownRespSdpBind |
value=118 displayed=SDP binding is operationally down on the responder side SDP binding is operationally down on the responder side. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| adminDownRespSdpBind |
value=119 displayed=SDP binding is administratively down on the responder side SDP binding is administratively down on the responder side. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| sdpBindVcidMismatch |
value=120 displayed=SDP binding VC ID mismatch between originator and responder SDP binding VC ID mismatch between originator and responder. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| sdpBindTypeMismatch |
value=121 displayed=SDP binding type mismatch between originator and responder SDP binding type mismatch between originator and responder. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| sdpBindVcTypeMismatch |
value=122 displayed=SDP binding VC type mismatch between originator and responder SDP binding VC type mismatch between originator and responder. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| sdpBindVlanVcTagMismatch |
value=123 displayed=SDP binding VLAN VC tag mismatch between originator and responder SDP binding VLAN VC tag mismatch between originator and responder. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| adminDownOrigSvc |
value=124 displayed=Service on the originator side is administratively down Service on the originator side is administratively down. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| adminDownRespSvc |
value=125 displayed=Service on the responder side is administratively down Service on the responder side is administratively down. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| adminDownOrigSdpId |
value=126 displayed=The originating SDP-ID is administratively down The originating SDP-ID is administratively down. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| adminDownRespSdpId |
value=127 displayed=The responding SDP-ID is administratively down The responding SDP-ID is administratively down. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| mTraceSourceIsNotRemote |
value=128 displayed=The multicast trace route test cannot be performed because the source address is not remote The multicast trace route test cannot be performed because the source address is not remote. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| invalidVirtualRouterId |
value=129 displayed=The OAM test cannot be performed because the associated virtual router ID is invalid The OAM test cannot be performed because the associated virtual router ID is invalid. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| ldpPrefixIsLocal |
value=130 displayed=The OAM test cannot be performed because the associated LDP prefix is local to the system The OAM test cannot be performed because the associated LDP prefix is local to the system. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| sourceIpIsNotLocal |
value=131 displayed=The OAM test cannot be performed because the associated source address is not local to the system The OAM test cannot be performed because the associated source address is not local to the system. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| nextHopIpIsLocal |
value=132 displayed=The OAM test cannot be performed because the associated next hop address is local to the system The OAM test cannot be performed because the associated next hop address is local to the system. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| targetIpIsLocal |
value=133 displayed=The OAM test cannot be performed because the associated target address is local to the system The OAM test cannot be performed because the associated target address is local to the system. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| invalidControlPlaneOption |
value=134 displayed=The control plane send or receive option is not allowed with the specified service The OAM test cannot be performed because the control plane send or receive option is not allowed with the specified service. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| iomRevisionNotSupported |
value=135 displayed=The OAM test cannot be performed due to a mismatch in supported revision with the provisioned IOMs The OAM test cannot be performed due to a mismatch in supported revision with the provisioned IOMs. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| invalidSourceMacOption |
value=136 displayed=The OAM test cannot be performed because the source MAC option is not allowed with the specified service The OAM test cannot be performed because the source MAC option is not allowed with the specified service. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| sendFailSpbMgdService |
value=137 displayed=The OAM test cannot be performed on a service which is managed by SPB The OAM test cannot be performed on a service which is managed by SPB. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| useStaticPwParameters |
value=138 displayed=The spoke SDP is configured for static PW The spoke SDP is configured for static PW. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| type1Fec129PwNotSupported |
value=139 displayed=The OAM test is not supported on type 1 FEC129 pseudowires The OAM test is not supported on type 1 FEC129 pseudowires. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| mplsTpLspPathNotOperational |
value=140 displayed=The OAM test cannot be performed because the MPLS-TP LSP path is not operational The OAM test cannot be performed because the MPLS-TP LSP path is not operational. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| invalidStaticMplsTpLsp |
value=141 displayed=The OAM test only supports static MPLS-TP LSPs The OAM test only supports static MPLS-TP LSPs. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| controlWordNotValid |
value=142 displayed=The control-word for the spoke-sdp is not valid for this OAM test The control-word for the spoke-sdp is not valid for this OAM test. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| pwPathIdNotConfigured |
value=143 displayed=The pw-path-id provisioning is not complete The pw-path-id provisioning is not complete. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| notSupportedOnVcSwitchService |
value=144 displayed=The OAM test is not supported on a vc-switching service The OAM test is not supported on a vc-switching service. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| sdpFarEndNotSupported |
value=145 displayed=The OAM test does not support sdp far end value The OAM test does not support sdp far end value. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| mplsTpLspPathShutdown |
value=146 displayed=The MPLS-TP path is currently shutdown The MPLS-TP path is currently shutdown. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| forceOptionIsBlocked |
value=147 displayed=The force option is currently blocked because of the configuration of a related entity The force option is currently blocked because of the configuration of a related entity. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| intfForLspPathIsNotOperational |
value=148 displayed=The interface for the LSP path is not operational The interface for the LSP path is not operational. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| ttlExpired |
value=149 displayed=Time-to-live (IPv4) or hop limit (IPv6) was too small The destination could not be reached because the time-to-live (IPv4) or hop limit (IPv6) was too small. This results from an ICMPv4 type 11 code 0 or ICMPv6 type 3 code 0 message. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| networkUnreachable |
value=150 displayed=The network specified by the destination address is unreachable The network specified by the destination address is unreachable. This results from an ICMPv4 type 3 code 0 or ICMPv6 type 1 code 0 message. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| hostUnreachable |
value=151 displayed=The host specified by the destination address is unreachable The host specified by the destination address is unreachable. This results from an ICMPv4 type 3 code 1 or ICMPv6 type 1 code 3 message. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| bgpLabelPrefixIsLocal |
value=152 displayed=The associated BGP Label Route prefix is local The OAM test cannot be performed because the associated BGP Label Route prefix is local to the system. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| bgpLabelPrefixUnknown |
value=153 displayed=The BGP Target FEC prefix entry is not in the Routing Table The OAM test cannot be performed because the BGP Target FEC prefix entry is not found in the Routing Table. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| ldpPrefixUnknown |
value=154 displayed=The LDP Target FEC prefix entry is not in the Routing Table The OAM test cannot be performed because the LDP Target FEC prefix entry is not found in the Routing Table. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| l2tpv3DeliveryTypeUnsupported |
value=155 displayed=The l2TPv3 delivery type is unsupported The OAM test cannot be performed because the l2TPv3 delivery type is unsupported. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| vPingPeerCvNoLspPing |
value=156 displayed=The peer CV bits do not support lsp ping The OAM test cannot be performed because the peer CV bits do not support lsp ping. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| vPingPeerCcNoCtrlWord |
value=157 displayed=The peer CC bits do not support control word The OAM test cannot be performed because the peer CC bits do not support control word. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| sendFailEvpnCfgdService |
value=158 displayed=Send Failed VPLS service that has EVPN configured The OAM test cannot be performed on a VPLS service that has EVPN configured. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| sendFailed |
value=159 displayed=Cannot send the test packet The OAM test cannot send the test packet. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| minimumPacketSizeNotMet |
value=160 displayed=Cannot send the test packet, minimum required packet size exceeds supplied packet size The OAM test cannot send the test packet as the minimum required packet size exceeds the user supplied packet size. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| invalidTargetFecType |
value=161 displayed=Test does not support this FEC type The OAM test does not support this FEC type. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| p2mpLspPingNotSupportedOnMgmtRtr |
value=162 displayed=P2MPLspPing test is not supported on the management router The OAM p2mpLspPing test is not supported on the management router. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| ipv4SdpFarEndsOnly |
value=163 displayed=Test only supports bindings and SDPs using an IPv4 far end The OAM test only supports bindings and SDPs using an IPv4 far end. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| vxlanEgrBndSvcMismatch |
value=164 displayed=Cannot send packets to VXLAN egress binding in different service as the one sending The OAM test cannot send packets to a VXLAN egress binding not owned by the same service as the one sending. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| vxlanNoMatchingTep |
value=165 displayed=Destination VTEP has not been configured The OAM test can only send to VTEPs that have been configured. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| vxlanEvpnUnconfigured |
value=166 displayed=Source EVPN has not been configured The OAM test can only send on a service with EVPN configured. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| ipv6SdpFarEndsNotSupported |
value=167 displayed=Test does not support bindings and SDPs using an IPv6 far end The OAM test does not support bindings and SDPs using an IPv6 far end. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| oamTestOverSRTunNotSupported |
value=168 displayed=Not supported on SR tunnels The OAM test is not supported on SR tunnels. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| sendFailEvpnCfgdPbbService |
value=169 displayed=Send Failed EVPN Configured PBB Service The OAM test cannot be performed on a VPLS/Epipe service that is associated with a b-vpls that has EVPN configured. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| txPortDown |
value=170 displayed=The transmit port is operationally down The transmit port is operationally down. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| noTxPort |
value=171 displayed=No transmit port No transmit port. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| parentAdminDown |
value=172 displayed=The parent of the MEP is admin shutdown The parent (SPOKE, SAP, SVC or PORT) of the MEP is admin shutdown. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| destMacResolveFail |
value=173 displayed=Unable to resolve the remote-mepid to MAC address Unable to resolve the remote-mepid to a unicast layer2 MAC address. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| vxlanIpV6TermUnsupported |
value=174 displayed=Test does not support IPv6 tunnel termination points The OAM test does not support IPv6 tunnel termination points. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| ipPrefixIsLocal |
value=175 displayed=IP prefix is local The OAM test cannot be performed because the associated IP prefix is local to the system. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| ipPrefixUnknown |
value=176 displayed=Target FEC prefix entry not found The OAM test cannot be performed because the Target FEC prefix entry is not found in the Routing Table. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| greEthBrdgdDelvryTypeUnsupported |
value=177 displayed=GRE Ethernet Bridged delivery type is unsupported The OAM test cannot be performed because the GRE Ethernet Bridged delivery type is unsupported. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| mtrace2Disabled |
value=178 displayed=Mtrace2 is disabled at the system level The mtrace2 test cannot be performed because mtrace2 is disabled at the system level. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| ipv6TunneledNextHopUnsupported |
value=179 displayed=VPRN ping/trace has no support for IPv6 tunneled next hops The VPRN ping/trace test has no support for IPv6 tunneled next hops. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| srTunneledNextHopUnsupported |
value=180 displayed=VPRN ping/trace has no support for Segment Routing tunneled next hops The VPRN ping/trace test has no support for Segment Routing tunneled next hops. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| srTeTunneledNextHopUnsupported |
value=181 displayed=VPRN ping/trace has no support for Segment Routing Traffic Engineering next hops The VPRN ping/trace test has no support for Segment Routing Traffic Engineering next hops. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| nextHopIpIsSubnet |
value=182 displayed=OAM test cannot be performed because the associated next hop address is a subnet The OAM test cannot be performed because the associated next hop address is a subnet. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| ipDestAndNextHopComboUnsupported |
value=183 displayed=IP destination address type and provided next hop type is not a supported combination The IP destination address type and provided next hop type is not a supported combination. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| resolvedIpDstSrcComboUnsupported |
value=184 displayed=Resolved IP dest address type and source address type is not a supported combination The resolved IP destination address type and provided source address type is not a supported combination. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| srPolicyNotFound |
value=185 displayed=The SR-POLICY not found given color and endpoint The SR-POLICY not found given color and endpoint. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| srPolicySegmentListNotFound |
value=186 displayed=The SR-POLICY's segment list not found given segment list Id The SR-POLICY's segment list not found given segment list Id. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| ethCfmUnsupportedTestType |
value=187 displayed=The test type is not valid for the MEP The test type is not valid for the MEP. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| ipPrefixInvalid |
value=188 displayed=The OAM test cannot be performed because the Target FEC prefix entry is not valid for the test The OAM test cannot be performed because the Target FEC prefix entry is not valid for the test. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| bierError |
value=189 displayed=The BIER OAM test received a reply with an unsuccessful return code The BIER OAM test received a reply with an unsuccessful return code. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| pathDestAddrTypeMismatch |
value=190 displayed=The path destination address type doesn't match the prefix address type The path destination address type doesn't match the prefix address type. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| srcAddrTypeMismatch |
value=191 displayed=The source address type doesn't match the prefix address type The source address type doesn't match the prefix address type. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| nhAddrTypeMismatch |
value=192 displayed=The next hop address type doesn't match the prefix address type The next hop address type doesn't match the prefix address type. applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |
| p2mpLspNotConfigured |
value=198 displayed=The P2MP-LSP is not Configured The P2MP-LSP is not Configured applicable for structure(s): sas.TraceProbeResult sas.PingPacketResult sas.ArchivedPingPacketResult sas.ArchivedTraceProbeResult |