|
Properties |
|
hopNumber |
The hop number.
type=int
|
|
ipAddressType |
The address type of ipAddress.
type=rtr.InetAddressType
|
|
ipAddress |
The IP address of the hop.
type=InetAddress
|
|
hopsSentProbes |
type=int
|
|
hopsProbeResponses |
type=int
|
|
hopsLastGoodProbe |
type=Date
|
|
minRtt |
The minimum 7x50 SR OAM Trace Route round-trip time (RTT)
received for this hop. A value of 0 for this object implies that no
RTT has been received
type=int
|
|
maxRtt |
The maximum 7x50 SR OAM Trace Route round-trip time (RTT)
received for this hop. A value of 0 for this object implies that no
RTT has been received.
type=int
|
|
averageRtt |
The current average 7x50 SR OAM Trace Route round-trip time
(RTT) for this hop."
type=int
|
|
rttSumOfSquares |
This object contains the sum of all 7x50 SR OAM Trace Route
responses received for this hop. Its purpose is to enable standard
deviation calculation."
type=long
|
|
minTt |
The minimum 7x50 SR OAM Trace Route outbound one-way-trip-time
received for this hop. A value of 0 for this object implies that no
one-way-trip-time has been received."
type=int
|
|
maxTt |
The maximum 7x50 SR OAM Trace Route outbound one-way-trip-time
received for this hop. A value of 0 for this object implies that no
one-way-trip-time has been received."
type=int
|
|
averageTt |
The current average 7x50 SR OAM Trace Route outbound
one-way-trip-time for this hop."
type=int
|
|
sumOfSquares |
This object contains the sum of all outbound one-way-trip-time
responses received for this hop. Its purpose is to enable standard
deviation calculation."
type=long
|
|
minInTt |
The minimum OAM trace route inbound one-way-trip-time received.
A value of 0 for this object implies that no one-way-trip-time
measurement is available
type=int
|
|
maxInTt |
The maximum OAM trace route inbound one-way-trip-time received.
A value of 0 for this object implies that no one-way-trip-time
measurement is available."
type=int
|
|
averageInTt |
The current average OAM inbound inbound one-way-trip-time.
A value of 0 for this object implies that no one-way-trip-time
measurement is available."
type=int
|
|
inTtSumOfSqrs |
This object contains the sum of the squares for the inbound
one-way-trip time of all trace route probe responses received.
Its purpose is to enable standard deviation calculation.
A value of 0 for this object implies that no one-way-trip-time
measurement is available.
type=long
|
|
outJitter |
The value indicates the
amount of outbound one-way trip jitter, expressed in microseconds,
for a trace route probe request Probe sent for this OAM test.
A value of 0 for this object implies that no one-way-trip jitter
measurement is available.
type=int
|
|
inJitter |
The value indicates the
amount of inbound one-way-trip jitter, expressed in microseconds,
for a trace route probe response Probe received for this OAM test.
type=int
|
|
rtJitter |
The value of tmnxOamTrHopsMinRtJitter indicates the
amount of two-way trip jitter, expressed in microseconds, for a
trace route probe sent for this OAM test.
type=int
|
|
probeTimeouts |
type=int
|
|
probeFailures |
type=int
|
|
tgtAddrType |
type=rtr.InetAddressType
|
|
tgtAddress |
type=InetAddress
|