| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| backupTag |
The value of backupTag specifies a 32-bit integer tag
that is used as the tag when the static route uses a
backup next-hop. This tag could then be used in route policies to
control distribution of the route into other protocols. A value of 0
indicates that the tag has not been set.
type=long default=0 minimum=0 maximum=4294967295 Displayed(tab/group)=Backup Tag |
| community1 |
The value of community1 specifies the community
name that is used to add to the static route. This value could then
be used in route policies to control the distribution of the route
into other protocols and by BGP to control the distribution of this
route into other routers
type=string default= minimum=0 maximum=72 Displayed(tab/group)=Community 1 |
| community10 |
The value of community10 specifies the community
name that is used to add to the static route. This value could then
be used in route policies to control the distribution of the route
into other protocols and by BGP to control the distribution of this
route into other routers
type=string default= minimum=0 maximum=72 Displayed(tab/group)=Community 10 |
| community11 |
The value of community11 specifies the community
name that is used to add to the static route. This value could then
be used in route policies to control the distribution of the route
into other protocols and by BGP to control the distribution of this
route into other routers
type=string default= minimum=0 maximum=72 Displayed(tab/group)=Community 11 |
| community12 |
The value of community12 specifies the community
name that is used to add to the static route. This value could then
be used in route policies to control the distribution of the route
into other protocols and by BGP to control the distribution of this
route into other routers
type=string default= minimum=0 maximum=72 Displayed(tab/group)=Community 12 |
| community2 |
The value of community2 specifies the community
name that is used to add to the static route. This value could then
be used in route policies to control the distribution of the route
into other protocols and by BGP to control the distribution of this
route into other routers
type=string default= minimum=0 maximum=72 Displayed(tab/group)=Community 2 |
| community3 |
The value of community3 specifies the community
name that is used to add to the static route. This value could then
be used in route policies to control the distribution of the route
into other protocols and by BGP to control the distribution of this
route into other routers
type=string default= minimum=0 maximum=72 Displayed(tab/group)=Community 3 |
| community4 |
The value of community4 specifies the community
name that is used to add to the static route. This value could then
be used in route policies to control the distribution of the route
into other protocols and by BGP to control the distribution of this
route into other routers
type=string default= minimum=0 maximum=72 Displayed(tab/group)=Community 4 |
| community5 |
The value of community5 specifies the community
name that is used to add to the static route. This value could then
be used in route policies to control the distribution of the route
into other protocols and by BGP to control the distribution of this
route into other routers
type=string default= minimum=0 maximum=72 Displayed(tab/group)=Community 5 |
| community6 |
The value of community6 specifies the community
name that is used to add to the static route. This value could then
be used in route policies to control the distribution of the route
into other protocols and by BGP to control the distribution of this
route into other routers
type=string default= minimum=0 maximum=72 Displayed(tab/group)=Community 6 |
| community7 |
The value of community7 specifies the community
name that is used to add to the static route. This value could then
be used in route policies to control the distribution of the route
into other protocols and by BGP to control the distribution of this
route into other routers
type=string default= minimum=0 maximum=72 Displayed(tab/group)=Community 7 |
| community8 |
The value of community8 specifies the community
name that is used to add to the static route. This value could then
be used in route policies to control the distribution of the route
into other protocols and by BGP to control the distribution of this
route into other routers
type=string default= minimum=0 maximum=72 Displayed(tab/group)=Community 8 |
| community9 |
The value of community9 specifies the community
name that is used to add to the static route. This value could then
be used in route policies to control the distribution of the route
into other protocols and by BGP to control the distribution of this
route into other routers
type=string default= minimum=0 maximum=72 Displayed(tab/group)=Community 9 |
| creationOrigin |
type=svt.L2RouteOriginType access=read-create default=manual |
| destination |
The value of this property indicates the
destination IP address of this static route.
type=InetAddress access=read-create Mandatory on create Displayed(tab/group)=Destination |
| destinationAddressType |
The value of this property indicates
the address type of destination address.
type=rtr.InetAddressType access=read-create default=ipv4 |
| multicastCapablePeers |
type=boolean access=read-create default=false Displayed(tab/group)=Multicast Capable Peers |
| prefixCreateOrigin |
The value of this property indicates
the mechanism that created this static route.
type=rtr.StaticRoutePrefixCreateOrigin access=read-only |
| prefixLength |
The value of this property indicates the prefix length associated with the
destination address.
type=int access=read-create default=24 minimum=0 maximum=128 Displayed(tab/group)=Prefix |
| prefixNextHopCount |
this property indicates the number of nexthops
configured under this prefix row entry.
type=int access=read-only default=0 |
| routingInstance |
Routing instance ID
type=long access=read-only default=0 Displayed(tab/group)=Routing Instance ID |
| routingInstanceName |
Routing instance Name
type=string access=read-only default= maximum=252 Displayed(tab/group)=Routing Instance Name |
| siteId |
type=string access=read-only default= maximum=50 Displayed(tab/group)=Site ID |
| siteName |
type=string access=read-only default= maximum=252 |
| tag |
The value of tag specifies a 32-bit integer tag
that is used to add to the static route. This tag could then be used
in route policies to control distribution of the route into other
protocols. A value of 0 indicates that the tag has not been set.
type=long default=0 minimum=0 maximum=4294967295 Displayed(tab/group)=Tag |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| 7450 ESS | Supported from 14.0.R1 |
| 7750 SR | Supported from 14.0.R1 |
| 7705 SAR Gen 2 | |
| 7705 SAR Hm | |
| 7950 XRS | Supported from 14.0.R1 |
| 7705 SAR | Supported from 9.0.R1 |
| 7705 SAR H | Supported from 9.0.R1 |
| 7250 IXR | Supported from 19.5.R1 |
| Product Specifics | |
| 7250 IXR 20.0 | |
| 7250 IXR 21.0 | |
| 7250 IXR 22.0 | |
| 7250 IXR 23.0 | |
| 7250 IXR 24.0 | |
| 7250 IXR 25.0 | |
| 7450 ESS 20.0 | |
| 7450 ESS 21.0 | |
| 7450 ESS 22.0 | |
| 7450 ESS 23.0 | |
| 7450 ESS 24.0 | |
| 7450 ESS 25.0 | |
| 7705 SAR Gen 2 25.0 | |
| 7705 SAR Hm 20.0 | |
| 7705 SAR Hm 21.0 | |
| 7705 SAR Hm 22.0 | |
| 7705 SAR Hm 23.0 | |
| 7705 SAR Hm 24.0 | |
| 7705 SAR Hm 25.0 | |
| 7750 SR 20.0 | |
| 7750 SR 21.0 | |
| 7750 SR 22.0 | |
| 7750 SR 23.0 | |
| 7750 SR 24.0 | |
| 7750 SR 25.0 | |
| 7950 XRS 20.0 | |
| 7950 XRS 21.0 | |
| 7950 XRS 22.0 | |
| 7950 XRS 23.0 | |
| 7950 XRS 24.0 | |
| 7950 XRS 25.0 | |