| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| ipsecPolicyEntryId |
Identifies the ID of a Security Policy entry and is the primary index for the table.
type=long access=read-create default=0 minimum=1 maximum=16 Displayed(tab/group)=Entry ID |
| ipsecPolicyId |
Identifies the ID of a Security Policy and is the primary index for the table.
type=long access=read-only minimum=0 maximum=32768 |
| localAddrAny |
Specifies whether the IP address on the VPN side can be any IP address.
If the value is 'true' then local IP address can be any IP address.
type=boolean default=false |
| localAddress |
Specifies the IP address on the VPN side.
If the value of localAddrAny is 'true' then the value
of localAddress will be empty.
type=InetAddress default=0.0.0.0 Displayed(tab/group)=IP Address (/Local IP Address) |
| localAddressOption |
The Local Address Option specifies the local IP prefix for the IPsec
security policy entry. The NFM-P considers the local IP as the source
IP when traffic is examined in the direction of the VPRN to the tunnel,
and as the destination IP when traffic flows from the tunnel to the VPRN.
type=ipsec.AddressOptionType default=0 Displayed(tab/group)=Local Address Option (/Local IP Address) |
| localAddressType |
Specifies the address type of local address. If the
value of localAddressAny is 'true' then the value of
localAddressType will be 'unknown'.
type=rtr.InetAddressType access=read-only default=ipv4 suppress enums=dns, ipv4Mcast, ipv4z, ipv6, ipv6Mcast, ipv6z (Where parent is one of (rtr.IPSecSecurityPolicy)) |
| localPrefixLength |
When combined with an IP address value, the Prefix Length
parameter specifies a local IP prefix. The range is 1 to 32
for an IPv4 address. A value of 32 is typically reserved for
an IPv4 system address. The IPv4 default is 24.
type=int default=0 minimum=0 maximum=32 Displayed(tab/group)=Prefix length (/Local IP Address) |
| localV6AddrAny |
Specifies whether the IP address on the VPN side can be any IP address.
If the value is 'true' then local IP address can be any IP address.
type=boolean default=false |
| localV6Address |
Specifies the IP address on the VPN side.
If the value of localV6AddrAny is 'true' then the value
of localV6Address will be empty.
type=InetAddress default=0:0:0:0:0:0:0:0 Displayed(tab/group)=IPv6 Address (/Local IPv6 Address) |
| localV6AddressOption |
To select either 'localV6AddrAny' or specify the local address.
type=ipsec.AddressOptionType default=0 Displayed(tab/group)=Local IPv6 Address Option (/Local IPv6 Address) |
| localV6AddressType |
Specifies the address type of local address. If the
value of localV6AddrAny is 'true' then the value of
localV6AddressType will be 'unknown'.
type=rtr.InetAddressType access=read-only default=ipv6 |
| localV6PrefixLength |
Specifies the number of bits to match the local address.
If the value of localV6AddrAny is 'true' then the value
of localV6PrefixLength will be 0.
type=int default=0 minimum=0 maximum=128 Displayed(tab/group)=Prefix length (/Local IPv6 Address) |
| remoteAddrAny |
Specifies whether the IP address on the tunnel side can be any IP address.
If the value is 'true' then remote IP address can be any IP address.
type=boolean default=false |
| remoteAddress |
Specifies the IP address on the tunnel side.
If the value of remoteAddrAny is 'true' then the value
of remoteAddress will be empty.
type=InetAddress default=0.0.0.0 Displayed(tab/group)=IP Address (/Remote IP Address) |
| remoteAddressOption |
The Remote Address Option specifies the remote IP prefix for
the IPsec security policy entry. The NFM-P considers the
remote IP as the source IP when traffic flows from the tunnel
to the VPN when traffic flows from the VPRN to the tunnel.
type=ipsec.AddressOptionType default=0 Displayed(tab/group)=Remote Address Option (/Remote IP Address) |
| remoteAddressType |
Specifies the address type of address in remoteAddress. If the
value of remotelAddrAny is 'true' then the value of
remoteAddressType will be 'unknown'.
type=rtr.InetAddressType access=read-only default=ipv4 suppress enums=dns, ipv4Mcast, ipv4z, ipv6, ipv6Mcast, ipv6z (Where parent is one of (rtr.IPSecSecurityPolicy)) |
| remotePrefixLength |
When combined with an IP address value, the Prefix Length
parameter specifies a remote IP prefix. The range is 1 to 32
for an IPv4 address. A value of 32 is typically reserved for
an IPv4 system address. The IPv4 default is 24.
type=int default=0 minimum=0 maximum=32 Displayed(tab/group)=Prefix length (/Remote IP Address) |
| remoteV6AddrAny |
Specifies whether the IP address on the tunnel side can be any IP address.
If the value is 'true' then remote IP address can be any IP address.
type=boolean default=false |
| remoteV6Address |
Specifies the IP address on the tunnel side.
If the value of remoteV6AddrAny is 'true' then the value
of remoteV6Address will be empty.
type=InetAddress default=0:0:0:0:0:0:0:0 Displayed(tab/group)=IPv6 Address (/Remote IPv6 Address) |
| remoteV6AddressOption |
To select either 'localV6AddrAny' or specify the local address.
type=ipsec.AddressOptionType default=0 Displayed(tab/group)=Remote IPv6 Address Option (/Remote IPv6 Address) |
| remoteV6AddressType |
Specifies the address type of address in remoteV6Address. If the
value of remoteV6AddrAny is 'true' then the value of
remoteV6AddressType will be 'unknown'.
type=rtr.InetAddressType access=read-only default=ipv6 |
| remoteV6PrefixLength |
Specifies the number of bits to match of the remoteV6Address.
If the value of remoteV6AddrAny is 'true' then the value
of remoteV6PrefixLength will be 0.
type=int default=0 minimum=0 maximum=128 Displayed(tab/group)=Prefix length (/Remote IPv6 Address) |
| rtrId |
Identifies the service the IPsec Security belongs to.
type=long access=read-only default=0 |
| siteId |
type=string access=read-only default=0.0.0.0 maximum=50 |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| 7750 SR |
Supported from 19.7.R1
|
| 7705 SAR Gen 2 | |
| 7705 SAR Hm | Supported from 19.7.R1 |