| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| siteId |
System IP address of the node where PCC Rule exists.
type=InetAddress access=read-create default= Mandatory on create |
| siteIdAddressType |
type=rtr.InetAddressType access=read-create default=ipv4 |
| siteName |
type=string access=read-only default= maximum=252 |
| subPCCRuleFlowDSCP |
The value of subPCCRuleFlowDSCP specifies the DSCP to be
matched for this flow
type=string access=read-only minimum=0 maximum=100 Displayed(tab/group)=DSCP |
| subPCCRuleFlowDirection |
The value of subPCCRuleFlowDirection indicates the flow direction
type=ressubscr.DirectionType access=read-only Displayed(tab/group)=Flow Direction |
| subPCCRuleFlowDstAddr |
The value of subPCCRuleFlowDstAddr indicates, together
with subPCCRuleFlowDstPfxLen the destination IP address of the flow
type=InetAddress access=read-only Displayed(tab/group)=Flow Address (/Destination) |
| subPCCRuleFlowDstAddrType |
The value of subPCCRuleFlowDstAddrType indicates the
address type of subPCCRuleFlowDstAddr
type=rtr.InetAddressType access=read-only |
| subPCCRuleFlowDstPfxLen |
The value of subPCCRuleFlowDstPfxLen indicates
the prefix length of subPCCRuleFlowDstAddr
type=int access=read-only Displayed(tab/group)=Prefix Length (/Destination) |
| subPCCRuleFlowDstPortHigh |
The value of subPCCRuleFlowDstPortHigh specifies the upper value
of the destination TCP/UDP port range of the flow
type=long access=read-only Displayed(tab/group)=Upper Port (/Destination) |
| subPCCRuleFlowDstPortLow |
The value of subPCCRuleFlowDstPortLow specifies the lower value
of the destination TCP/UDP port range of the flow
type=long access=read-only Displayed(tab/group)=Lower Port (/Destination) |
| subPCCRuleFlowId |
The value of subPCCRuleFlowId indicates the ordered
precedence number of this flow in the given PCC-rule
type=long access=read-create Mandatory on create Displayed(tab/group)=Rule ID |
| subPCCRuleFlowProtNxtHdr |
The value of subPCCRuleFlowProtNxtHdr specifies
for IPv4 MAF the IP protocol field, and for IPv6 the next header
type to be used in the match criteria for this flow.
Some well-know protocol numbers are TCP (6), and UDP (7).
The value of -1 is used to indicate that this object is not
initialized.
The value of -2 is used to indicate udp/tcp protocol matching
type=int access=read-only Displayed(tab/group)=Protocol |
| subPCCRuleFlowSrcAddr |
The value of subPCCRuleFlowSrcAddr indicates, together
with subPCCRuleFlowSrcPfxLen the source IP address of the flow
type=InetAddress access=read-only Displayed(tab/group)=Flow Address (/Source) |
| subPCCRuleFlowSrcAddrType |
The value of subPCCRuleFlowSrcAddrType indicates the
address type of subPCCRuleFlowSrcAddr
type=rtr.InetAddressType access=read-only |
| subPCCRuleFlowSrcPfxLen |
The value of subPCCRuleFlowSrcPfxLen indicates
the prefix length of subPCCRuleFlowSrcAddr
type=int access=read-only Displayed(tab/group)=Prefix Length (/Source) |
| subPCCRuleFlowSrcPortHigh |
The value of subPCCRuleFlowSrcPortHigh specifies the upper value
of the source TCP/UDP port range of the flow
type=long access=read-only Displayed(tab/group)=Upper Port (/Source) |
| subPCCRuleFlowSrcPortLow |
The value of subPCCRuleFlowSrcPortLow specifies the lower value
of the source TCP/UDP port range of the flow
type=long access=read-only Displayed(tab/group)=Lower Port (/Source) |
| subPccRuleKey |
The value of subPccRuleKey indicates a system wide unique
identifier assigned by the system to each PCC-rule
type=long access=read-create Mandatory on create Displayed(tab/group)=Rule Key |
| subPccRuleName |
The value of subPccRuleName indicates the PCC rule name.
The name of a PCC rule must however not be unique in the system
type=string access=read-create minimum=1 maximum=100 Mandatory on create Displayed(tab/group)=Rule Name |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| 7750 SR | Supported from 13.0.R4 |
| 7450 ESS | Supported from 13.0.R4 |