| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| accessInterfacePointer |
type=Pointer access=read-create Mandatory on create Displayed(tab/group)=Access Interface |
| acctSessionId |
Indicates the accounting session ID of the host.
type=string access=read-only default= Displayed(tab/group)=Accounting Session ID (/Profiles Information) |
| efhAttemps |
Indicates the number of times the diameter session has assigned interim quota to the SLA Profile instance.
type=long access=read-only Displayed(tab/group)=Attempts (/Extended Failure Handling (EFH)) |
| efhMaxAttemps |
Indicates the maximum number of times the diameter session can assign interim quota to the SLA Profile instance.
type=long access=read-only Displayed(tab/group)=Maximum Attempts (/Extended Failure Handling (EFH)) |
| efhState |
Indicates the Extended Failure Handling (EFH) state of the diameter session.
active(1) - The SLA Profile instance is using quota granted by interim credit.
inactive(2) - The SLA Profile instance is using quota granted by the Online Charging Server (OCS).
disabled(3) - EFH is disabled.
notApplicable(4) - The SLA Profile instance has no diameter session."
type=ressubscr.EFHState access=read-only Displayed(tab/group)=State (/Extended Failure Handling (EFH)) |
| efhTotActiveCount |
Indicates how many times the diameter credit-control session has been in EFH mode.
type=long access=read-only Displayed(tab/group)=Total Active Count (/Extended Failure Handling (EFH)) |
| efhTotActiveTime |
Indicates total time the diameter credit control sessions has been in EFH mode.
type=Time access=read-only Displayed(tab/group)=Total Active Time (/Extended Failure Handling (EFH)) |
| efhUpTime |
Indicates the time (duration in hundredths of a second) EFH is in active state.
type=Time access=read-only Displayed(tab/group)=Active Time (/Extended Failure Handling (EFH)) |
| egrHQosMgmtStatus |
Indicates the hqos manageable state of egress qos policers.
disabled (1), -- policer is not configured as hqos manageable.
enabled (2), -- policer is hqos managed.
mismatch (3) -- policer is in orphaned operational state as scheduler-policy does not exist.
type=ressubscr.SubHQosMgmtStatus access=read-only Displayed(tab/group)=Egress HQoS Management Status (/Profiles Information) |
| egrQosPolIdOvr |
Indicates the id of the QoS SAP Egress Policy used by this SLA profile instance.
type=long access=read-only default=0 minimum=0 maximum=4294967295 |
| egrQosPolIdOvrPointer |
type=Pointer access=read-only default= |
| egrQosPolIdOvrString |
>
Indicates the id String of tthe QoS SAP Egress Policy used by this SLA profile instance.
type=string default= Displayed(tab/group)=Egress Policy (/QoS Policy Overrides) |
| encapValue |
type=long access=read-create default=0 |
| hsEgrAggRateLimit |
Specifies the maximum total rate of all egress HS queues for this subscriber having
SLA mode 'expanded'. For other sla-modes, this value is ignored.
The value '-1' means that there is no limit.
type=long access=read-only default=-1 minimum=-1 maximum=100000000 units=kbps Displayed(tab/group)=Aggregated Rate Limit (/Profiles Information/HS) |
| hsEgrQueueStatsMode |
Specifies the mode of statistics collected for all the HS queues for this Subscriber.
A value of 'v4V6' indicates separate counters are collected for IPv4
and IPv6 instead of the normal queue statistics.
type=slaprofile.HsEgrStatsMode access=read-only default=noOverride Displayed(tab/group)=Egress Queue Stats Mode (/Profiles Information/HS) |
| hsOperEgrAggRateLimit |
The value indicates the egress aggregate rate limit override received by RADIUS.
The PIR rate to be used in kbps. The value -1 means maximum rate; -2 specifies no override.
type=int access=read-only default=-2 units=kbps Displayed(tab/group)=Operational Aggregated Rate Limit (/Profiles Information/HS) |
| ingQosPolIdOvr |
Indicates the id of the QoS SAP Ingress Policy used by this SLA profile instance.
type=long access=read-only default=0 minimum=0 maximum=4294967295 |
| ingQosPolIdOvrPointer |
type=Pointer access=read-only default= |
| ingQosPolIdOvrString |
Indicates the id String of the QoS SAP Ingress Policy used by this SLA profile instance.
type=string default= Displayed(tab/group)=Ingress Policy (/QoS Policy Overrides) |
| portId |
type=long access=read-create default=0 |
| ressubscr.SubscriberSlaAccLoopEncap-Set |
type=Children-Set |
| ressubscr.SubscriberSlaQosOverride-Set |
type=Children-Set |
| siteId |
System IP address of the node where subscriber exists.
type=InetAddress access=read-create Mandatory on create Displayed(tab/group)=Site ID |
| siteIdAddressType |
type=rtr.InetAddressType access=read-create Mandatory on create |
| slaCategoryMapNamePointer |
type=Pointer access=read-only default= Displayed(tab/group)=Category Map Policy (/Profiles Information) |
| slaDiameterSessionId |
Indicates the id of the diameter session used by this SLA profile instance.
type=string access=read-only default= Displayed(tab/group)=Diameter Gy Session ID (/Profiles Information) |
| slaDiameterSessionIdPointer |
DEPRECATED: 12.0 R1 - DEPRECATED: For 11.0 R1+ SR nodes, please use slaDiameterSessionId instead. type=Pointer access=read-only default= |
| slaProfileName |
type=string access=read-create minimum=1 maximum=32 Mandatory on create |
| slaProfilePointer |
type=Pointer access=read-create Mandatory on create Displayed(tab/group)=SLA Profile (/Profiles Information) |
| spiGroupId |
Indicates the group identifier.
If the value of spiGroupType is equal to 'perSap', the value of
spiGroupId is always equal to one.
If the value of spiGroupType is equal to 'perGroup', the value
of spiGroupId is a group identifier specified by an AAA server.
If the value of spiGroupType is equal to 'perSessionPpp', the
value of spiGroupId is a PPP session identifier, as indicated
by the object PPP ID.
If the value of spiGroupType is equal to 'perSessionIpoe', the
value of spiGroupId is an IPoE session identifier, as indicated
by the object IPoE ID."
type=long access=read-create default=1 Displayed(tab/group)=SPI Group ID (/Profiles Information) |
| spiGroupType |
Indicates the meaning of the spiGroupId.
type=ressubscr.SpiGroupType access=read-create default=perSap Displayed(tab/group)=SPI Group Type (/Profiles Information) |
| subscrIdent |
Unique identifier for this subscriber
type=string access=read-create minimum=1 maximum=64 Mandatory on create Displayed(tab/group)=Subscriber Identification |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Methods |
|---|
retrievingSlaProfileInstStruct
: ressubscr.RetrievingSlaProfileInstStruct - retrievingSlaProfileInstStruct of retrieving SLA Profile Instance(s) request
with desired siteID, subscrIdent, portName, innerEncap, outerEncap, spiGroupType,
spiGroupId whose values are used to be retrieve SLA Profile Instances.
The retrievingSessionStruct must have set siteID, subscrIdent.
retrieveQoSOvr
: boolean - (Optional) Specifies if QoS Override should be retrieved,the default is "true".
The QoS Override won't be retrieved if Service preferences "retrieveQoSOvr" is false.
retrieveAcclpEncap
: boolean - (Optional) Specifies if Access Loop Encapsulation should be retrieved,the default is "true".
The Access Loop Encapsulation won't be retrieved if Service preferences "retrieveAcclpEncap" is false.
resultFilter
: ResultFilter - (Optional) Filter for narrowing down the information returned per object
continueOnFailure
: continueOnFailure - (Optional) Continue processing requests in this stream if an exception occurs, unless the request is invalid. Default: false
result
: List (generic.CommonManagedEntityInformation) -
ressubscr.SlaProfileInstance.retrieveSlaProfileInstancesException
| Supported Network Elements | |
|---|---|
| 7750 SR | Supported from 8.0.R4 |
| 7450 ESS | Supported from 8.0.R4 |
| Product Specifics | |
| 7450 ESS 20.0 | |
| 7450 ESS 21.0 | |
| 7450 ESS 22.0 | |
| 7450 ESS 23.0 | |
| 7450 ESS 24.0 | |
| 7450 ESS 25.0 | |
| 7750 SR 20.0 | |
| 7750 SR 21.0 | |
| 7750 SR 22.0 | |
| 7750 SR 23.0 | |
| 7750 SR 24.0 | |
| 7750 SR 25.0 | |