| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| adiminState |
Specifies the administrative state of PTP on the virtual router instance.
If this is 'outOfService (3)', no PTP packets will be transmitted on that
virtual router instance, and all PTP packets received on that virtual router instance will be ignored.
type=ptp.PtpVprnAdminState default=2 Displayed(tab/group)=Administrative State (/PTP) |
| clockTypeVprn |
type=ptp.Alu1588PtpClockType default=2 |
| creationOrigin |
type=svt.L2RouteOriginType access=read-create default=manual |
| operState |
Indicates the operational state of PTP on the virtual router instance.
The operational state will only be 'inService (2)' if PTP is
administratively enabled on the virtual router instance, if PTP is
globally operational on the system, and if the service is operationally up.
type=ptp.PtpVprnOperState access=read-only Displayed(tab/group)=Operational State (/PTP) |
| peerLimitVPrn |
Specifies the maximum number of PTP peers that may be automatically created by the system on this virtual router instance.
The system has a global limit on the number of PTP peers that may be created by the system upon reception of PTP signaling packets.
Specifying a value for number of peers ensures that a specific virtual router instance will not exhaust this global resource.
A value of -1 indicates that there is no configured limit for this virtual router instance, and the system may create PTP peers up to the
global limit of PTP peers on the PTP clock.
A non-zero value does not explicitly reserve resources for this virtual router instance. However, if all PTP virtual router instances
have configured PeerLimit to a value other than -1, and the total of these limits is less than or equal to the global system limit,
this effectively reserves resources for each virtual router instance.
If the system has already automatically created PTP peers on a virtualrouter instance, the limit cannot be reduced lower than the current
count of automatically created PTP peers on the virtual router instance.
type=int default=-1 minimum=-1 maximum=512 Displayed(tab/group)=Peer Limit (/PTP) |
| routerId |
Uniquely identifies the PTP config entry of on the virtual router instance.
type=long access=read-create Mandatory on create |
| siteId |
Site IP address of the NE on which the virtual routing instance is created.
type=string access=read-only default=0.0.0.0 maximum=64 Displayed(tab/group)=Site ID (/Site) |
| siteName |
Site name of the NE on which the virtual routing instance is created.
type=string access=read-only default= maximum=252 Displayed(tab/group)=Site Name (/Site) |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| 7750 SR |
Supported from 11.0.R5 until 13.0.R5
|
| 7705 SAR Gen 2 |
Supported for all versions
|
| 7450 ESS |
Supported from 11.0.R5
|
| 7950 XRS |
Supported from 14.0.R6
|
| 7250 IXR | Supported from 19.5.R1 |
| Product Specifics | |
| 7250 IXR 20.0 | |
| 7250 IXR 21.0 | |
| 7250 IXR 22.0 | |
| 7250 IXR 23.0 | |
| 7250 IXR 24.0 | |
| 7250 IXR 25.0 | |
| 7450 ESS 20.0 | |
| 7450 ESS 21.0 | |
| 7450 ESS 22.0 | |
| 7450 ESS 23.0 | |
| 7450 ESS 24.0 | |
| 7450 ESS 25.0 | |
| 7705 SAR Gen 2 25.0 | |
| 7750 SR 20.0 | |
| 7750 SR 21.0 | |
| 7750 SR 22.0 | |
| 7750 SR 23.0 | |
| 7750 SR 24.0 | |
| 7750 SR 25.0 | |
| 7950 XRS 20.0 | |
| 7950 XRS 21.0 | |
| 7950 XRS 22.0 | |
| 7950 XRS 23.0 | |
| 7950 XRS 24.0 | |
| 7950 XRS 25.0 | |