| Overview | Package | Class | Deprecated | Help |
| Properties | |
|---|---|
| acctSessionId |
The Account Session ID of the PPP session.
type=string access=read-only default= Displayed(tab/group)=Account Session ID (/PPP General) |
| addressPool |
Indicates the IP address pool which is used to search for an IP address for this session..
type=string access=read-only default= Displayed(tab/group)=IP Address Pool (/PPP General/IPv4 Information) |
| ancpString |
ASCII representation of DSLAM circuit ID
type=string access=read-only default= Displayed(tab/group)=ANCP String (/Residential Subscriber) |
| appProfileString |
The application profile string applicable for this PPP session.
type=string access=read-only default= Displayed(tab/group)=Application Profile String (/Residential Subscriber) |
| authProtocol |
The PPP protocol used to authenticate the PPP session.
The value 'none' indicates that no PPP authentication was done. The
value 'pap' indicates that authentication was done via the Password
Authentication Protocol. The value 'chap' indicates that
authentication was done via the Challenge-Handshake Authentication
Protocol."
type=pppoe.PppAuthProtocol access=read-only Displayed(tab/group)=PPP Authentication Protocol (Authentication Protocols/Authentication Protocols) |
| categoryMapName |
Indicates the value of the category map name applicable for this session.
type=string access=read-only default= Displayed(tab/group)=Category Map Name (/Residential Subscriber) |
| circuitId |
Defines the value of the circuit-id sub-option.
type=string access=read-only default= Displayed(tab/group)=Circuit ID (/DHCP) |
| description |
Indicates an automatically generated description of the session.
type=string access=read-only Displayed(tab/group)=Description (/PPP General) |
| encapVal |
Indicates the value of the label used to identify this SAP on the access port
specified by portId.
type=long access=read-create Mandatory on create |
| groupIf |
Indicates the interface index of the group-interface to which this session belongs.
type=long access=read-only |
| groupIfName |
Indicates the interface name of the group-interface to which this session belongs.
type=string access=read-only default= Displayed(tab/group)=Group Interface (/PPP General) |
| ignoringDfBit |
Indicates if this system ignores the Don't Fragment (DF) bit
in the IPv4 header of traffic received for this session
type=boolean access=read-only Displayed(tab/group)=Ignoring do-not-fragment (DF) Bit (/PPP General) |
| intermediateDestId |
ASCII representation of the intermediate destination (a DSLAM for example) of the host.
type=string access=read-only default= Displayed(tab/group)=Intermediate Destination ID (/Residential Subscriber) |
| ipAddrPrefixLength |
Indicates the length of ipAddress.
type=int access=read-only |
| ipAddress |
The IP address of the PPP session
type=InetAddress access=read-only default=0.0.0.0 Displayed(tab/group)=IP Address (/PPP General/IPv4 Information) |
| ipAddressType |
The IP address type for the PPP session
type=rtr.InetAddressType access=read-only default=ipv4 |
| ipcpState |
The current state of the PPP IP Control Protocol of the PPP session
type=pppoe.PppControlProtocolState access=read-only default=initial Displayed(tab/group)=PPP IP Control Protocol State (Authentication Protocols/Authentication Protocols) |
| ipv6Addr |
Indicates the IPv6 Address of the PPP session.
type=InetAddress access=read-only default= Displayed(tab/group)=IPv6 Address (/PPP General/IPv6 Information) |
| ipv6AddrOrigin |
Indicates the IPv6 Address Origin of the PPP session.
type=pppoe.PppoeSessionInfoOrigin access=read-only Displayed(tab/group)=IPv6 Address Source (/PPP General/IPv6 Information) |
| ipv6AddrPool |
Indicates the IPv6 Address Pool for the PPP session.
type=string access=read-only default= minimum=0 maximum=253 Displayed(tab/group)=IPv6 Address Pool (/PPP General/IPv6 Information) |
| ipv6AddrType |
Indicates the Address Type of the PPP session.
type=rtr.InetAddressType access=read-only default=ipv6 |
| ipv6CpState |
Indicates the current state of the PPP IPv6 Control Protocol of the PPP session
type=pppoe.PppControlProtocolState access=read-only Displayed(tab/group)=PPP IPv6 Control Protocol State (Authentication Protocols/Authentication Protocols) |
| ipv6DelPfxOrigin |
The value indicates the origin of ipv6DelPrefix.
type=pppoe.PppoeSessionInfoOrigin access=read-only Displayed(tab/group)=Delegate IPv6 Prefix Source (/PPP General/IPv6 Information) |
| ipv6DelPfxPool |
Indicates the DHCP server pool from which the delegated prefix, indicated by
ipv6DelPrefix, is allocated.
type=string access=read-only default= Displayed(tab/group)=Delegate IPv6 Prefix Pool (/PPP General/IPv6 Information) |
| ipv6DelPrefix |
indicates the IPv6 delegated prefix
type=InetAddress access=read-only default=0:0:0:0:0:0:0:0 Displayed(tab/group)=Delegate IPv6 Prefix (/PPP General/IPv6 Information) |
| ipv6DelPrefixLength |
Indicates the length of ipv6DelPrefix
type=int access=read-only Displayed(tab/group)=Delegate IPv6 Prefix Length (/PPP General/IPv6 Information) |
| ipv6DelPrefixType |
Indicates the address type of ipv6DelPrefix
type=rtr.InetAddressType access=read-only default=ipv6 |
| ipv6Dns1Type |
Indicates the address type of DnsIpv61IpAddr
type=rtr.InetAddressType access=read-only default=ipv6 |
| ipv6Dns2Type |
Indicates the address type of Ipv6Dns2IpAddr
type=rtr.InetAddressType access=read-only default=ipv6 |
| ipv6Prefix |
Indicates the IPv6 prefix used for stateless address autoconfiguration.
type=InetAddress access=read-only default=0:0:0:0:0:0:0:0 Displayed(tab/group)=IPv6 Prefix (/PPP General/IPv6 Information) |
| ipv6PrefixLength |
Indicate the length of ipv6Prefix
type=int access=read-only Displayed(tab/group)=IPv6 Prefix Length (/PPP General/IPv6 Information) |
| ipv6PrefixOrigin |
The value indicates the origin of ipv6Prefix.
type=pppoe.PppoeSessionInfoOrigin access=read-only Displayed(tab/group)=IPv6 Prefix Source (/PPP General/IPv6 Information) |
| ipv6PrefixPool |
Indicates the IPv6 Prefix Pool for the PPP session.
type=string access=read-only default= minimum=0 maximum=253 Displayed(tab/group)=IPv6 Prefix Pool (/PPP General/IPv6 Information) |
| ipv6PrefixType |
Indicates the address type of ipv6Prefix
type=rtr.InetAddressType access=read-only default=ipv6 |
| isMcStandBy |
A session is considered MC standby if the sessions group interface has an srrp instance (tmnxSrrpOperTable)
associated with it and this instance's state (tmnxSrrpOperState) is in not master or disabled
type=boolean access=read-only default=false |
| l2tpConnectionId |
Indicates the connection ID of the L2TP session associated with this session.
type=long default=0 Displayed(tab/group)=L2TP Session Connection ID (/L2TP) |
| l2tpPeerAddress |
Specifies the IP address for the L2TP peer.
type=InetAddress access=read-only |
| l2tpPeerAddressType |
Specifies the address type of the IP address for L2TP the peer.
type=rtr.InetAddressType access=read-only |
| l2tpRtrId |
Indicates the virtual router ID of the L2TP session associated with this session.
type=int default=0 Displayed(tab/group)=L2TP Session Virtual Router ID (/L2TP) |
| lcpState |
The current state of the PPP Link Control Protocol of the PPP session
type=pppoe.PppControlProtocolState access=read-only default=initial Displayed(tab/group)=PPP Link Control Protocol State (Authentication Protocols/Authentication Protocols) |
| logicalLineId |
Indicates the value of the Logical Line ID (LLID). This value is first obtained from a RADIUS
server in a pre-authentication phase, and subsequently transmitted in the Access-Request message
for the actual authentication.
type=string access=read-only default= Displayed(tab/group)=Logical Line ID (Authentication Protocols/RADIUS) |
| origIpv6CpInfo |
indicates which source provided the IPv6CP information.
type=pppoe.PppoeSessionInfoOrigin access=read-only default=none Displayed(tab/group)=Session IPv6CP Information Source (Authentication Protocols/Authentication Protocols) |
| originDns |
The value indicates which source provided the DNS addresses.
type=pppoe.PppoeSessionInfoOrigin access=read-only Displayed(tab/group)=DNS Address Source (DNS and NBNS IP Addresses/DNS and NBNS) |
| originIp |
The value indicates which source provided the IP address.
type=pppoe.PppoeSessionInfoOrigin access=read-only Displayed(tab/group)=IP Address Source (/PPP General/IPv4 Information) |
| originNbns |
The value indicates which source provided the NBNS addresses.
type=pppoe.PppoeSessionInfoOrigin access=read-only Displayed(tab/group)=NBNS Address Source (DNS and NBNS IP Addresses/DNS and NBNS) |
| originStrings |
The value indicates which source provided the subscriber identification strings
(subscriber profile string, SLA profile string, ANCP string,
intermediate destination identifier and application profile string).
type=pppoe.PppoeSessionInfoOrigin access=read-only Displayed(tab/group)=Subscriber Strings Identification Source (/Residential Subscriber) |
| originSubscrIdent |
Defines from what source this subscriber identification was received
type=pppoe.PppoeSessionInfoOrigin access=read-only Displayed(tab/group)=Subscriber Identification Source (/Residential Subscriber) |
| pppMtu |
The PPP MTU of the PPP session.
type=int access=read-only units=bytes Displayed(tab/group)=PPP MTU (/PPP General) |
| pppoe.PPPAccessLoopEncap-Set |
type=Children-Set |
| pppoe.PPPBgpIPv6Entry-Set |
type=Children-Set |
| pppoe.PPPQosOverride-Set |
type=Children-Set |
| pppoe.PPPSessionBgpEntry-Set |
type=Children-Set |
| pppoe.PPPSessionRadiusClassAttribute-Set |
type=Children-Set |
| primaryDnsIpAddress |
The Primary DNS IP address of the PPP session
type=InetAddress access=read-only default=0.0.0.0 Displayed(tab/group)=Primary DNS IP Address (DNS and NBNS IP Addresses/DNS and NBNS) |
| primaryDnsIpv6Addr |
Indicates the primary DNS server.
type=InetAddress default=0:0:0:0:0:0:0:0 Displayed(tab/group)=Primary DNS IPv6 Address (DNS and NBNS IP Addresses/DNS (IPv6) ) |
| primaryDnsType |
The primary DNS address type for the PPP session
type=rtr.InetAddressType access=read-only default=ipv4 |
| primaryNbnsIpAddress |
The Primary NBNS IP address of this PPP session
type=InetAddress access=read-only default=0.0.0.0 Displayed(tab/group)=Primary NBNS IP Address (DNS and NBNS IP Addresses/DNS and NBNS) |
| primaryNbnsType |
The primary NBNS IP address type for the PPP session
type=rtr.InetAddressType access=read-only default=ipv4 |
| radiusClass |
Indicates the Class attribute returned by the RADIUS server in an Access-Accept message.
If no RADIUS authentication is performed for this session, or RADIUS did not return this
attribute, the value of this object is empty
type=string access=read-only default= Displayed(tab/group)=Class (Authentication Protocols/RADIUS) |
| radiusUsername |
Indicates the User-Name attribute returned by the RADIUS server in an Access-Accept message.
If RADIUS did not return this attribute, the value of this object is equal to the User-Name
attribute sent in the original Access-Request message. If no RADIUS authentication is performed
for this session, the value of this object is empty
type=string access=read-only default= Displayed(tab/group)=User Name (Authentication Protocols/RADIUS) |
| remoteId |
Defines the value of the remote-id sub-option inserted by the PPP intermediate agent.
type=string access=read-only default= Displayed(tab/group)=Remote ID (/DHCP) |
| retailerIf |
Indicates the interface index of the retailer VPRN interface to which this session
belongs. If the value of this object is non-zero, the session belongs to a retailer VPRN.
type=long access=read-only Displayed(tab/group)=Retailer Interface Index (/Business Subscriber) |
| retailerSvcId |
Indicates the service ID of the retailer VPRN service to which this session belongs.
If the value of this object is non-zero, the session belongs to a retailer VPRN.
type=long access=read-only Displayed(tab/group)=Retailer Service ID (/Business Subscriber) |
| ripListenerStatus |
Indicates the status of the RIP listener.
type=ressubscr.RipListenerStatus access=read-only Displayed(tab/group)=RIP Listener Status (/RIP Listener) |
| ripPolicyPointer |
Indicates the RIP policy which is used to set up the RIP listener for this PPP session.
type=Pointer access=read-only Displayed(tab/group)=RIP Policy (/RIP Listener) |
| sapPointer |
Reference to the access interface the session belongs to.
type=Pointer access=read-only default= Displayed(tab/group)=SAP (/PPP General) |
| sapPortId |
Indicates the ID of the access port to which this session belongs.
type=long access=read-create Mandatory on create |
| sapSessionIdx |
Indicates the sap session index of the PPP session.
type=int access=read-only Displayed(tab/group)=SAP Session Index (/PPP General) |
| secondaryDnsIpv6Addr |
Indicates the secondary DNS server.
type=InetAddress default=0:0:0:0:0:0:0:0 Displayed(tab/group)=Secondary DNS IPv6 Address (DNS and NBNS IP Addresses/DNS (IPv6) ) |
| secondryDnsIpAddress |
The secondary DNS IP address of this PPP session
type=InetAddress access=read-only default=0.0.0.0 Displayed(tab/group)=Secondary DNS IP Address (DNS and NBNS IP Addresses/DNS and NBNS) |
| secondryDnsType |
The secondary DNS address type for the PPP session
type=rtr.InetAddressType access=read-only default=ipv4 |
| secondryNbnsIpAddress |
The secondary NBNS IP address of this PPP session
type=InetAddress access=read-only default=0.0.0.0 Displayed(tab/group)=Secondary NBNS IP Address (DNS and NBNS IP Addresses/DNS and NBNS) |
| secondryNbnsType |
The secondary NBNS IP address type for this PPP session
type=rtr.InetAddressType access=read-only default=ipv4 |
| serviceId |
The service ID of IES/VPRN service to which the PPP session belongs.
type=long access=read-create Mandatory on create Displayed(tab/group)=Service ID (/PPP General) |
| sessionIndex |
The local identifier of the session.
type=long access=read-create default=0 Displayed(tab/group)=Session ID (/PPP General) |
| siteId |
System IP address of the node on which PPP session exists.
type=InetAddress default=0.0.0.0 Displayed(tab/group)=Site ID (/PPP General) |
| siteIdAddrType |
type=rtr.InetAddressType default=ipv4 |
| spiGroupId |
Indicates the SLA profile instance group identifier specified by the AAA server.
type=long access=read-only Displayed(tab/group)=SLA Profile Instance Group ID (/PPP General) |
| subIdentPolicy |
Pointer specifies the subscriber identification policy
applicable on this SAP
type=Pointer default= |
| subscrIdent |
Defines the subscriber identification applicable for this PPP session
type=string access=read-only Displayed(tab/group)=Subscriber Identification (/Residential Subscriber) |
| subscrProfileString |
Mapped string to the subscriber profile assigned to the PPP session.
type=string access=read-only default= Displayed(tab/group)=Subscriber Profile String (/Residential Subscriber) |
| subscrSLAString |
Mapped string to the subscriber SLA profile assigned to the PPP session.
type=string access=read-only default= Displayed(tab/group)=SLA Profile String (/Residential Subscriber) |
| subscriberIf |
Indicates the interface index of the subscriber-interface to which this session belongs.
type=long access=read-only |
| subscriberIfName |
Indicates the interface name of the subscriber-interface to which this session belongs.
type=string access=read-only default= Displayed(tab/group)=Subscriber Interface (/PPP General) |
| terminationType |
Indicate the the termination type of this session.
type=pppoe.SessionTerminationType access=read-only Displayed(tab/group)=Termination Type (/Business Subscriber) |
| timeout |
Defines the session timeout received from the Radius server (if applicable).
type=int access=read-only default=0 Displayed(tab/group)=Timeout (/PPP General) |
| type |
Determines the type of this session.
type=pppoe.PppSessionType access=read-only default=oE Displayed(tab/group)=Session Type (/PPP General) |
| upTime |
The value specifies how long the PPP session already exists.
type=Time access=read-only Displayed(tab/group)=System Up Time (/PPP General) |
| userName |
The user name learned during the PPP authentication phase
type=string access=read-only Displayed(tab/group)=User Name (Authentication Protocols/Authentication Protocols) |
| Properties inherited from ManagedObject |
|---|
| actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed |
| Supported Network Elements | |
|---|---|
| 7750 SR | |
| 7705 SAR Gen 2 | |
| 7705 SAR Hm | |
| 7450 ESS | |
| Product Specifics | |
| 7450 ESS 20.0 | |
| 7450 ESS 21.0 | |
| 7450 ESS 22.0 | |
| 7450 ESS 23.0 | |
| 7450 ESS 24.0 | |
| 7450 ESS 25.0 | |
| 7705 SAR Gen 2 25.0 | |
| 7750 SR 20.0 | |
| 7750 SR 21.0 | |
| 7750 SR 22.0 | |
| 7750 SR 23.0 | |
| 7750 SR 24.0 | |
| 7750 SR 25.0 | |