|
Properties |
|
autoDistributeOnRelease |
The 'Auto Distribute Global Policy when Released' parameter specifies whether or
not the NFM-P will allow automatic distribution of a global policy once it is
released. By default, when the parameter is disabled, the user must configure the
distribution of a released global policy manually. The options are: disabled (default), enabled.
type=boolean
default=false
Displayed(tab/group)=Auto Distribute Global Policy when Released (Policies/Configuration Mode)
|
|
localEditOnly |
The 'Force Local Edit Only for Scope exclusive' parameter specifies the default
behavior of whether or not a policy’s distribution mode is set to local edit only, when
that policy’s Scope parameter is also set to exclusive. The options are: Disabled (default), Enabled
type=boolean
default=false
Displayed(tab/group)=Force Local Edit Only for Scope exclusive (Policies/Distribution Mode)
|
|
localEditOnlyOnCLIChange |
The 'Switch Distribution Mode to Local Edit Only on CLI Change' parameter
specifies whether or not a change made to a local policy using CLI causes a switch
in the distribution mode for certain types of policies supported on at least one
SR-family NE. The options are: Disabled (default), Enabled
When this parameter is enabled, then the following types of changes made using CLI
will cause the distribution mode of the local policy to be set as outlined:
1. New local policy creation using CLI, when no global version of the policy exists
in NFM-P, will set the distribution mode to Sync with Global. However,
subsequent CLI changes made to the policy context will set the distribution mode
to Local Edit Only.
2. New local policy creation using CLI, when a global version of the policy exists
in NFM-P, will set the distribution mode Local Edit Only.
3. Modification of a local policy using CLI, when global and local versions of the
policy already exist in NFM-P, will set the distribution mode to Local Edit
Only.
4. Modification of a policy using CLI and then subsequently undoing those
modifications also using CLI, will set the distribution mode Local Edit Only,
when global and local versions of the policy already exist in NFM-P.
5. For an Application Assurance policy resulting from an AA group creation, the
distribution mode of the local policy will be set to Local Edit Only.
type=boolean
default=false
Displayed(tab/group)=Switch Distribution Mode to Local Edit Only on CLI Change (Policies/Distribution Mode)
|
|
maxScheduledAuditResultPerLocalPolicy |
The 'Max Number Of Audit Result stored per Local Policy' parameter specifies the
maximum number of scheduled audit results that can be stored for a local policy
before purging older results. The range is 1 to 65535. The default is 10.
type=int
default=10
minimum=1
maximum=65535
Displayed(tab/group)=Max Number Of Audit Result stored per Local Policy (Policies/Scheduled Audit)
|
|
secureMode |
Enforce enhanced security constraints for NE configuration.
type=boolean
access=read-only
default=false
Displayed(tab/group)=SAR-Hm Enhanced Security (Policies/Enhanced NE Security Mode)
|
|
securityZoneDiscoveredInLocalEditOnlyMode |
type=boolean
default=true
Displayed(tab/group)=Discover Security Zone in Local Edit Only (Policies/Security policy)
|
|
showFilterDisplayName |
The 'Show Display Name on Forms' parameter specifies whether the Displayed Name
parameter is displayed on the policy filter configuration form for the ACL IP, ACL
IPv6, and ACL MAC policy filter types. The options are: Disabled, Enabled (default)
type=boolean
default=true
Displayed(tab/group)=Show Display Name on Forms (Policies/ACL Filter)
|
|
showNetworkPolicyDisplayName |
The 'Show Display Name on Forms' parameter specifies whether the Displayed Name
parameter is displayed on the policy filter configuration form for the Network QoS Policy.
The options are: Disabled, Enabled (default)
type=boolean
default=true
Displayed(tab/group)=Show Display Name on Forms (Policies/Network Policy)
|
|
showQoSPolicyDisplayName |
The 'Show Display Name on Forms' parameter specifies whether the Displayed Name
parameter is displayed on the policy configuration form for the QoS access egress
and QoS access ingress policy types. The options are: Disabled, Enabled (default)
type=boolean
default=true
Displayed(tab/group)=Show Display Name on Forms (Policies/Access Ingress/Egress Policy)
|