Overview Package Class Deprecated Help

nat
PoolRange

public class PoolRange

Properties
creationOrigin

type=svt.L2RouteOriginType
access=read-create
default=manual
description The value of description specifies the description of this NAT pool address range.

type=string
default=
minimum=0
maximum=80
Displayed(tab/group)=Description
drainState The value of drainState specifies if this NAT pool address range is put in draining state. While a NAT pool address range is draining state, no more addresses are taken from this range.

type=boolean
default=false
Displayed(tab/group)=Drain State
ipAddressType The value of ipAddressType specifies the address type of rangeStart and rangeEnd.

type=rtr.InetAddressType
access=read-create
Mandatory on create
natPoolName The Name of the NAT Pool

type=string
access=read-create
default=1
numAllocatedBlocks The value of numAllocatedBlocks indicates the number of port blocks that are allocated from this NAT pool address range.

type=long
access=read-only
Displayed(tab/group)=Number of Allocated Blocks
rangeEnd The value of the object rangeEnd specifies the end address of this NAT pool address range.

type=InetAddress
access=read-create
Mandatory on create
Displayed(tab/group)=Range End
rangeStart The value of the object rangeStart specifies the start address of this NAT pool address range.

type=InetAddress
access=read-create
Mandatory on create
Displayed(tab/group)=Range Start
routerId Specifies the Virtual Router Instance.

Additonal (Deprecation) Information

Pre-11.0 R1 the property was marked as

  • writeAccess="none"
  • mandatoryOnCreate="yes"
Although a value for the property was required for a creation request, NFM-P would ignore the passed in value.

To facilitate transition to read-only property and allow time for OSS applications to adjust, the writeAccess and mandatoryOnCreate attributes have been removed. The behavior is still similar to pre-11.0R1, except that the property is non-mandatory on create:

  • During creation a value for this property can be specified, but it is going to be ignored (relaxed constraint).
  • After creation of the object, the property becomes read-only (existing constraint). Attempting to write to the property will not cause a XMLException anymore. Instead, the result will have a configureException with similar text in the description entity as the XMLException (change).

DEPRECATED: 11.0 R1 - in future releases the property will become read-only and cannot be set during creation
type=int
default=1
  
Properties inherited from ManagedObject
actionMask, children-Set, deploymentState, isFaultSquelched, name, objectFullName, selfAlarmed
 
Supported Network Elements
7750 SR Supported from 10.0.R1 until 12.0.R1
  • Excluded chassis types: 7750-SRc12, 7750-SRc4, 7750-SR1 Fixed CFM, 7750 SR-14s, 7750 SR-7s, 7750 SR-1s, 7750 SR-2s
Supported from 12.0.R1 until 13.0.R8
  • Excluded chassis types: 7750-SRc4, 7750-SRa4, 7750-SRa8, 7750 SR-1e, 7750 SR-2e, 7750 SR-3e, 7750-SR1 Fixed CFM, 7750 SR-14s, 7750 SR-7s, 7750 SR-1s, 7750 SR-2s
Supported from 13.0.R8 until 20.5.R1
  • Excluded chassis types: 7750-SRc4, 7750-SRa4, 7750-SRa8, 7750-SR1 Fixed CFM, 7750 SR-14s, 7750 SR-7s, 7750 SR-1s, 7750 SR-2s
Supported from 20.5.R1
  • Excluded chassis types: 7750-SRa4, 7750-SRa8, 7750 SR-14s
7705 SAR Gen 2
7450 ESS Supported from 11.0.R1
  • Excluded chassis types: 7450-ESS1
  • Required Capabilities: MixedMode